Release 5.6 Updates


Release 5.6

Enhancements and new features included in Release 5.6 are listed below.

General
  • Automation Control Step Builder for provisioning automated tests

AAA
CDMA
  • Simple IP Fall Back on MIP Failure

GPRS
IP Data
  • IPv4 data over IPv6 IPSec tunnel, and Ipv6 data over IPv4 IPSec tunnel

L2TP VPN
  • Enable successful authentication when SUT is sending random vector AVP set to mandatory

UMTS

3GPP2 Enhanced Crypto Algorithms

When configuring EAP settings, if you enable EAP-SIM authentication  or EAP-AKA authentication, you have the choice of using either the 3GPP Milenage or 3GPP2 Enhanced Cryptographic Algorithms.

Extensible Authentication Protocol (EAP) for Diameter

Support has been added for using Diameter EAP to authenticate MNs in AAA testing in accordance with RFC 4072.  EAP measurements collected during AAA Diameter server emulation are reported on the Diameter Auth tab. Client side measurements appear on the Diameter NAS Auth tab.

WiMAX RADIUS Authentication and Accounting Attributes

Release 5.6 adds support for most of the WiMAX RADIUS VSA Authentication and Accounting attributes defined in the NWG Stage 3 specification....

3G Direct Tunnel

The 3GPP Release 7 Direct Tunnel provides a direct data path from the RNC to the GGSN. In the GGSN test case, with GTP version set to 1, you can enable the direct tunnel and associated error indication features in the GTP sub-tab for GGSN Node and GGSN Nodal parameters. In the UMTS test case, set UMTS version to 7 and you can enable a direct tunnel from the IuPS tab.

GMM "Combined" Attach Request

You can now choose the type of GMM Attach request message that the UMTS test will send the SGSN for the MNs: GPRS only, GPRS while IMSI is attached, or a combined GPRS/IMSI attach.


^ Back to Top