The values on the S1-AP tab report the bearer plane processing measurements in a MME Nodal Test Case and the MME Node Test Case.
In the default view, the Reports tab displays the Summary view, which summarizes the measurements for the test session. If your test includes multiple test cases, you can view the report for a single test case by changing the report view...
Unless otherwise noted, cumulative values report the number of occurrences or rates calculated since the start of the test, and per-interval values report the number of occurrences or rates calculated during the interval. You can view either by changing the measurement values...
Elapsed Time is the first measurement on every tab. It reports the amount of time between the start of the test and the end of the report interval.
Test Iteration reports the current iteration in a repeating test session. It is only displayed when a Number of Iterations is defined for the test session.
The following measurements record the number and types of messages exchanged during PDP context establishment, modification, and deactivation.
Setup Requests Sent — This defines the number of Setup messages (for reconnection) sent to the MME.
Setup Responses Received — This defines the number of Setup Responses (for reconnection) recvd from the MME.
Setup Failures Received — This defines the number of Setup Failures received from the MME.
Setup Timeouts — This defines the number of timeouts waiting for a Setup Response from the MME.
MME Config Update Rcvd — This defines the number of Configuration Update received from the MME.
MME Config Update Sent — This defines the number of Configuration Update sent from the MME.
MME Config Update Ack Sent — This defines the number of Configuration Update request acknowledgements sent from the MME.
MME Config Update Ack Rcvd — This defines the number of Configuration Update request acknowledgements received from the MME.
MME Config Update Failure Sent — This defines the number of Configuration Update Failures sent from the MME.
MME Config Update Failure Rcvd — This defines the number of Configuration Update Failures received from the MME.
eNodeB Config Updates Received — This defines the number of eNodeB Config Updates Received by the MME.
eNodeB Config Update Ack Received — This defines the number of eNodeB Config Update acknowledgements received by the MME.
eNodeB Config Update Sent — This defines the number of eNodeB Config Updates sent from the MME.
eNodeB Config Update Responses Sent — This defines the number of eNodeB Config Update Responses sent from the MME.
eNodeB Config Update Failure Received — This defines the number of eNodeB Config Update Failures received by the MME.
eNodeB Config Update Failure Sent — This defines the number of eNodeB Config Update Failures sent from the MME.
eNodeB Config Update Timeouts — This defines the number of eNodeB Config Update timeouts.
Write Replace Warning Requests Sent — This defines the number of Write Replace Warning Requests sent from the MME.
Write Replace Warning Responses Received — This defines the number of Write Replace Warning Responses received by the MME.
Kill Requests Received — This defines the number of Kill Requests received by the MME.
Kill Requests Sent — This defines the number of Kill Requests sent from the MME.
Kill Responses Received — This defines the number of Kill Responses received by the MME.
Kill Responses Sent — This defines the number of Kill Responses sent by the MME.
Trunking Individual Paging Messages — This defines the number of Trunking Individual paging messages received by the MME.
eNodeB Config Transfer Sent — This defines the number of eNodeB Configuration Transfer messages sent from the MME.
eNodeB Config Transfer Received — This defines the number of eNodeB Configuration Transfer messages received by the MME.
MME Config Transfer Sent — This defines the number of MME Configuration Transfer messages sent from the MME.
MME Config Transfer Received — This defines the number of MME Configuration Transfer messages received by the MME.
UE Secondary RAT Usage Reporting — This defines the number of UE Secondary RAT Usage Reporting requests sent from the MME.
UE Context Modification Indications — This defines the number of context Modification Indications requests sent from the MME.
UE Context Modification Indication Confirms — This defines the number of context Modification Indication Confirms received by the MME.
PWS Restart Indications Sent — This defines the number of PWS Restart Indications sent from the MME.
PWS Restart Indications Received — This defines the number of PWS Restart Indications received by the MME.
PWS Failure Indications Sent — This defines the number of PWS Failure Indications sent from the MME.
PWS Failure Indications Received — This defines the number of PWS Failure Indications received by the MME.
UE Context Modification Requests — This defines the number of context Modification request sent from the MME.
UE Context Modification Responses — This defines the number of context Modification responses received by the MME.
UE Context Suspend Requests — This defines the number of context Suspend request sent from the MME.
UE Context Suspend Responses — This defines the number of context Suspend responses received by the MME.
UE Context Resume Requests — This defines the number of context Resume request sent from the MME.
UE Context Resume Responses — This defines the number of context Resume responses received by the MME.
UE Capability Info Indications — This defines the number of capability Info Indications received by the MME.
Overload Starts — Indicates the MMEs within a pool area are overloaded (sent to eNodeBs).
Overload Stops — Indicates the message sent from MME to eNodeB. When the MME has recovered and wishes to increase its load, the MME sends OVERLOAD STOP messages to the eNodeB(s).
Setup Timeouts — This defines the number of Setup Timeouts received by the MME.
Resets Received — This defines the number of Reset Received from the MME
Reset Acks Sent — This defines the number of Resets ACKs sent to the MME
Resets Sent — This defines the number of Resets sent to the MME
Reset Acks Received — This defines the number of Reset ACKs received from the MME
Reset Timeouts — This defines the number of timeouts waiting for a Reset ACK from the MME
Error Indications Received — This defines the number of Error Indications received from the MME
Error Indications Sent — This defines the number of Error Indications Sent to the MME
E-RAB Modification Indication — This defines the number of E-RAB Modification Indications.
E-RAB Modification Confirm — This defines the number of E-RAB Modification Confirms.
Connection Establishment Indication — This defines the number of Connection Establishment Indications (The establishment of the UE-associated logical S1-connection) to the MME
Reroute Nas Request — This defines the number of Reroute Nas Request received from the MME (Used with Decor (Dedicated Core Networks TR 23.401)
Init Context Setup Requests — This defines the number of Initial Context Setup Requests received from the MME
Init Context Setup Responses — This defines the number of Initial Context Setup Responses sent to the MME
Init Context Setup Failures — This defines the number of Initial Context Setup Failures sent to the MME
Bearer Setup Requests — This defines the number of Bearer Setup Requests received from the MME
Bearer Setup Responses — This defines the number of Bearer Setup Responses sent to the MME
Bearer Modify Requests — This defines the number of Bearer Modify Requests from the MME
Bearer Modify Responses — This defines the number of Bearer Modify Responses sent to the MME
Bearer Release Requests — This defines the number of Bearer Release Requests sent to the MME
Bearer Release Commands — This defines the number of Bearer Release Commands from the MME
Bearer Release Completes — This defines the number of Bearer Release Completes sent to the MME
Paging Messages — This defines the number of Paging Messages received from the MME
Unexpected Paging — This defines the number of Paging Messages that are not expected (unexpected) received by an active UE.
Pages Ignored — This defines the number of Paging Messages that were ignored by MME.
S1 Release Requests — This defines the number of S1 Release Request sent to the MME
S1 Release Commands — This defines the number of S1 Release Commands received from the MME
S1 Release Completes — This defines the number of S1 Release Completes sent to the MME
S1 Release Timeouts — This defines the number of Timeouts waiting for S1 Release Commands from the MME
Init UE Messages — This defines the number of Initial UE messages sent to the MME
Uplink NAS Transports — This defines the number of Uplink NAS Transport messages sent to the MME
Downlink NAS Transports — This defines the number of Downlink NAS Transports received from the MME
Path Switch Requests — This defines the number of Path Switch Requests sent to the MME
Path Switch Request Acks — This defines the number of Path Switch Request Acks received from the MME
Path Switch Failures — This defines the number of Path Switch Failures received from the MME
Path Switch Timeouts — This defines the number of timeouts waiting for a Path Switch Ack from the MME
Handover Required — The number of Handover Required PDUs sent initiating handoff.
Handover Cancel — The number of Handover Cancel PDUs sent initiating handoff.
Handover Cancel ACk — The number of Handover Cancel Ack acknowledged.
Handover Prep Timeouts — The number of times a test did not receive a response preparation to handover before the timer expired.
Handover Prep Failures — The number of times the test was unable to prepare for a handover due to errors.
Handover Failures — The number of times the test was unable to establish a handover due to errors.
Handover Requests — The number of Handover Request PDUs sent conveying the information necessary to establish the required PFCs (Packet Flow Context).
Handover Request Acks — The number of times successful completion of the requested handoff was acknowledged.
Handover Request Timeouts — The number of times the handoff retry time expired while waiting for a response to a Handover Request.
Handover Commands — The total number of Handover Commands.
Handover Timeouts — The number of times a response was not received before the timer expired.
Handover Notifications — The number of times a successful handover notifications was received.
X2 Handover Count — The number of contexts handed over directly to the Target eNodeB from the Source eNodeB.
X2 Handover Average Delay Time — The average latency from the source to the destination, measured from the time the Source eNodeB sends a packet until the Target eNodeB receives it.
X2 Handover Minimum Delay Time — The minimum measured latency from the Source eNodeB sends a packet until the Target eNodeB receives it.
X2 Handover Maximum Delay Time — The maximum measured latency from the Source eNodeB sends a packet until the Target eNodeB receives it.
UE Capability Info Indications — Indicates the number of times the eNodeB sends a UE Capability Info Indication message to the MME.
The S1 handoff type supports GTPv2 Indirect Forwardings for any LTE mobility test
S1 Handover Count — The number of contexts handed over directly to the Target Bearer from the Source eNodeB.
S1 Handover Average Delay Time — The average latency from the source to the destination, measured from the time the Source eNodeB sends a packet until the Target Bearer receives it.
S1 Handover Minimum Delay Time — The minimum measured latency from the Source eNodeB sends a packet until the Target Bearer receives it.
S1 Handover Maximum Delay Time — The minimum measured latency from the Source eNodeB sends a packet until the Target Bearer receives it.
Uplink CDMA2000 Tunneling — The number of Uplink CDMA2000 Tunneling messages.
Downlink CDMA2000 Tunneling — The number of Downlink CDMA200 Tunneling messages.
Downlink UE Associated LPPA Transport — The number of Downlink UE Associated LPPA messages.
Uplink UE Associated LPPA Transport — The number of Uplink UE Associated LPPA messages.
Downlink Non-UE Associated LPPA Transport — The number of Downlink Non-UE Associated LPPA messages.
Uplink Non-UE Associated LPPA Transport — The number of Uplink Non-UE Associated LPPA messages.
MME Status Transfer Messages Rcvd — This defines the number of Status Transfer Messages received by MME (the source MME) from the eNodeB during S1 Handover with SGW relocation.
eNodeB Status Transfer Messages Sent — This defines the number of Status Transfer Messages sent by the emulated eNodeB to the source MME during S1 Handover with SGW relocation.
MME Status Transfer Messages Sent — This defines the number of Status Transfer Messages sent by the MME to the eNodeB during S1 Handover with SGW relocation.
eNodeB Status Transfer Messages Rcvd — This defines the number of Status Transfer Messages received by the emulated eNodeB from the source MME during S1 Handover with SGW.
eNodeB CP Relocation Indication Msg — This defines the number of CP Relocation Messages received by the emulated eNodeB from the source MME during CP-CIoT-CpRelocation Handover.
MME CP Relocation Indication Msg — This defines the number of CP Relocation Messages sent by the MME to the eNodeB during CP-CIoT-CpRelocation Handover.
eNodeB NAS Non Delivery Indication Msg — This defines the number of eNodeB NAS Non Delivery Indication Messages.
Session Not Found — This defines the number of messages received with unknown session identifiers. See additional breakdown below.
Session Not Enough — This defines the number of times that sessions have been depleted.
Malformed Messages — This defines the number of malformed messages received from the MME.
eNodeB Retrieve UE Info Message — This defines the number of eNodeB Retrieve UE Info Messages.
MME UE Info Transfer Message — This defines the number of MME UE Info Transfer Messages.
|
|
|
Measurements |
Measurement Variable |
|
Session Not Found |
S1apSessionNotFound |
|
Session Not Found - Bearer Setup Req |
S1apSessionNotFoundBearerSetupReq |
When eNB receives E-RAB SETUP REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - Bearer Modify Req |
S1apSessionNotFoundBearerModifyReq |
When eNB receives E-RAB MODIFY REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - Bearer Release Command |
S1apSessionNotFoundBearerReleaseCmd |
When eNB receives E-RAB RELEASE COMMAND message but doesn’t find s1ap session to process it |
Session Not Found - Init Context Setup Request |
S1apSessionNotFoundInitCtxSetupReq |
When eNB receives INITIAL CONTEXT SETUP REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - S1 Release Command |
S1apSessionNotFoundS1ReleaseCmd |
When eNB receives UE CONTEXT RELEASE COMMAND message but doesn’t find s1ap session to process it |
Session Not Found - UE Context Modification Request |
S1apSessionNotFoundUeCtxModificationReq |
When eNB receives UE CONTEXT MODIFICATION REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - Handover Command |
S1apSessionNotFoundHandoverCmd |
When eNB receives HANDOVER COMMAND message but doesn’t find s1ap session to process it |
Session Not Found - Handover Prep Failure |
S1apSessionNotFoundHandoverPrepFail |
When eNB receives HANDOVER PREPARATION FAILURE message but doesn’t find s1ap session to process it |
Session Not Found - Handover Request |
S1apSessionNotFoundHandoverReq |
When eNB receives HANDOVER REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - Path Switch Request Ack |
S1apSessionNotFoundPathSwitchReqAck |
When eNB receives PATH SWITCH REQUEST ACKNOWLEDGE message but doesn’t find s1ap session to process it |
Session Not Found - Path Switch Failure |
S1apSessionNotFoundPathSwitchReqFail |
When eNB receives PATH SWITCH REQUEST FAILURE message but doesn’t find s1ap session to process it |
Session Not Found - Handover Cancel Ack |
S1apSessionNotFoundHandoverCancelAck |
When eNB receives HANDOVER CANCEL ACKNOWLEDGE message but doesn’t find s1ap session to process it |
Session Not Found - MmeStatusTransfer |
S1apSessionNotFoundMmeStatusTranfer |
When eNB receives MME STATUS TRANSFER message but doesn’t find s1ap session to process it |
Session Not Found - Paging |
S1apSessionNotFoundPaging |
When eNB receives PAGING message but doesn’t find s1ap session to process it |
Session Not Found - Downlink NAS Transport |
S1apSessionNotFoundDownlinkNasTransport |
When eNB receives DOWNLINK NAS TRANSPORT message but doesn’t find s1ap session to process it |
Session Not Found - Downlink CDMA2000 Tunneling |
S1apSessionNotFoundDownlinkCDMA2kTunneling |
When eNB receives DOWNLINK S1 CDMA2000 TUNNELING message but doesn’t find s1ap session to process it |
Session Not Found - Trace Start |
S1apSessionNotFoundTraceStart |
When eNB receives TRACE START message but doesn’t find s1ap session to process it |
Session Not Found - Deactivate Trace |
S1apSessionNotFoundDeactivateTrace |
When eNB receives DEACTIVATE TRACE message but doesn’t find s1ap session to process it |
|
|
|
Measurements |
Measurement Variable |
|
Session Not Found |
S1apSessionNotFound |
|
Session Not Found - Bearer Setup Response |
S1apSessionNotFoundBearerSetupRsp |
When MME receives E-RAB SETUP RESPONSE message but doesn’t find s1ap session to process it |
Session Not Found - Bearer Modify Response |
S1apSessionNotFoundBearerModifyRsp |
When MME receives E-RAB MODIFY RESPONSE message but doesn’t find s1ap session to process it |
Session Not Found - Bearer Release Complete |
S1apSessionNotFoundBearerReleaseCmpl |
When MME receives E-RAB RELEASE RESPONSE message but doesn’t find s1ap session to process it |
Session Not Found - Bearer Release Request |
S1apSessionNotFoundBearerReleaseReq |
When MME receives E-RAB RELEASE INDICATION message but doesn’t find s1ap session to process it |
Session Not Found - Init Context Setup Response |
S1apSessionNotFoundInitCtxSetupRsp |
When MME receives INITIAL CONTEXT SETUP RESPONSE message but doesn’t find s1ap session to process it |
Session Not Found - Init Context Setup Failure |
S1apSessionNotFoundInitCtxSetupFail |
When MME receives INITIAL CONTEXT SETUP FAILURE message but doesn’t find s1ap session to process it |
Session Not Found - S1 Release Request |
S1apSessionNotFoundS1ReleaseReq |
When MME receives UE CONTEXT RELEASE REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - S1 Release Complete |
S1apSessionNotFoundS1ReleaseCmpl |
When MME receives UE CONTEXT RELEASE COMPLETE message but doesn’t find s1ap session to process it |
Session Not Found - UE Context Modification Response |
S1apSessionNotFoundUECtxModificationRsp |
When MME receives UE CONTEXT MODIFICATION RESPONSE message but doesn’t find s1ap session to process it |
Session Not Found - Handover Required |
S1apSessionNotFoundHandoverRqrd |
When MME receives HANDOVER REQUIRED message but doesn’t find s1ap session to process it |
Session Not Found - Handover Request Ack |
S1apSessionNotFoundHandoverReqAck |
When MME receives HANDOVER REQUEST ACKNOWLEDGE message but doesn’t find s1ap session to process it |
Session Not Found - Handover Failure |
S1apSessionNotFoundHandoverFail |
When MME receives HANDOVER FAILURE message but doesn’t find s1ap session to process it |
Session Not Found - Handover Notification |
S1apSessionNotFoundHandoverNotify |
When MME receives HANDOVER NOTIFY message but doesn’t find s1ap session to process it |
Session Not Found - Path Switch Request |
S1apSessionNotFoundPathSwitchReq |
When MME receives PATH SWITCH REQUEST message but doesn’t find s1ap session to process it |
Session Not Found - Handover Cancel |
S1apSessionNotFoundHandoverCancel |
When MME receives HANDOVER CANCEL message but doesn’t find s1ap session to process it |
Session Not Found - eNB Status Transfer |
S1apSessionNotFoundEnbStatusTransfer |
When MME receives eNB STATUS TRANSFER message but doesn’t find s1ap session to process it |
Session Not Found - Init UE Message |
S1apSessionNotFoundInitUeMessage |
When MME receives INITIAL UE MESSAGE message but doesn’t find s1ap session to process it |
Session Not Found - Uplink NAS Transport |
S1apSessionNotFoundUplinkNasTransport |
When MME receives UPLINK NAS TRANSPORT message but doesn’t find s1ap session to process it
|
Session Not Found - NAS Non Delivery Indication |
S1apSessionNotFoundNasNonDeliveryInd |
When MME receives NAS NON DELIVERY INDICATION message but doesn’t find s1ap session to process it |
Session Not Found - Uplink CDMA2000 Tunneling |
S1apSessionNotFoundUplinkCDMA2kTunneling |
When MME receives UPLINK S1 CDMA2000 TUNNELING message but doesn’t find s1ap session to process it |
Session Not Found - UE Capability Info Indication |
S1apSessionNotFoundUECapabilityInfoInd |
When MME receives UE CAPABILITY INFO INDICATION message but doesn’t find s1ap session to process it |
Session Not Found - Cell Traffic Trace |
S1apSessionNotFoundCellTrafficTrace |
When MME receives CELL TRAFFIC TRACE message but doesn’t find s1ap session to process it |
Cause - Radio Unspec — Sent for Radio Network layer Cause when none of the specified values applies.
Cause - Radio Tx 2 Reloc Abnormal Expiry — The timer guarding the handover that takes place over X2 has abnormally expired.
Cause - Radio Release Eutran Generated Reason — Release is initiated due to E-UTRAN generated reason.
Cause - Radio HO Cancelled — The reason for the action is cancellation of Handover.
Cause - Radio Fail In Target Epc Enb — The handover failed due to a failure in target EPC/eNB or target system..
Cause - Radio Ho Target Not Allowed — Handover to the indicated target cell is not allowed for the UE in question.
Cause - Radio Ts1 Reloc Overall Reloc Expiry — The reason for the action is expiry of timer TS1RELOCoverall.
Cause - Radio Ts1 Reloc Prep Expiry —Handover preparation procedure is cancelled when timer TS1RELOCprep expires.
Cause - Radio Cell Not Available — The concerned cell is not available.
Cause - Radio Unknown Target Id — Handover rejected because the target ID is not known to the EPC.
Cause - No Radio Resource Available in Target Cell — Load on Target cell is too high.
Cause - Radio Unknown Or Already Allocated Mme Ue S1ap Id — The action failed because the MME UE S1AP ID is either unknown, or (for a first message received at the eNB) is known and already allocated to an existing context.
Cause - Radio Unknown Or Already Allocated Enb Ue S1ap Id — The action failed because the eNB UE S1AP ID is either unknown, or (for a first message received at the MME) is known and already allocated to an existing context.
Cause - Radio Unknown Or Inconsistent Pair Ue S1ap Id — The action failed because both UE S1AP IDs are unknown, or are known but do not define a single UE context.
Cause - Radio Fail In Radio Interface Proc — Radio interface procedure has failed.
Cause - Radio Invalid Qos Combination — The action was failed because of invalid QoS combination.
Cause - Radio Interaction With Other Proc — The action is due to an ongoing interaction with another procedure,
Cause - Radio Unknown Enb Id —The action failed because the E-RAB ID is unknown in the eNB.
Cause - Radio Mult Enb Id Instance — the action failed because multiple instances of the same E-RAB ID has been provided to the eNB.
Cause - Radio Encryption Integrity Alg Not Supported — The eNB is unable to support any of the encryption and/or integrity protection algorithms supported by the UE.
Cause - Radio Not Supported Qci Value — The E-RAB setup failed because the requested QCI is not supported.
Cause - Radio Invalid Csg Id — The CSG ID to the target eNB was found invalid.
Cause - Transport Resource Unavailable — The required transport resources are not available.
Cause - Transport Unspec — Sent when none of the above cause values applies but still the cause is Transport Network layer related.
Cause - Nas Auth Fail — The action is due to authentication failure.
Cause - Nas Unspec — Sent when none of the above cause values applies but still the cause is NAS related.
Cause - Nas Csg Sub Expiry — The action is due to the UE becoming a non-member of the currently used CSG.
Cause - Protocol Transfer Syntax Error Rej — The received message included an abstract syntax error and the concerning criticality indicated "reject".
Cause - Protocol Abstract Syntax Error Ignore — The received message included an abstract syntax error and the concerning criticality indicated "ignore and notify".
Cause - Protocol Msg Not Compatible With State — The received message was not compatible with the receiver state.
Cause - Protocol Semantic Error — The received message included a semantic error.
Cause - Protocol Abstract Syntax Error Falsely Construct — The received message contained IEs or IE groups in wrong order or with too many occurrences.
Cause - Protocol Unspec — Sent when none of the above cause applies but still the cause is Protocol related.
Cause - Misc Ctr Proc Overload — Control processing overload.
Cause - Misc Not Enough User Plane Resource — Not enough resources are available related to user plane processing.
Cause - Misc Hardware Fail — Action related to hardware failure.
Cause - Misc Oam Intervention — The action is due to O&M intervention.
Cause - Misc Unspec — Sent when none of the above cause applies but still the cause is related to any of the categories Radio Network Layer, Transport Network Layer, NAS or Protocol.
Cause - Misc Unknown Plmn — The MME does not identify any PLMN provided by the eNB.