The values on the RADIUS tab report the number of messages sent and received, and the average response times for messages received from a AAA SUT. It is available in the AAA Server Nodal, AAA Server Node, and IP Application Node test cases.
In the default view, the Reports tab displays the Summary view, which summarizes the measurements for the test session. If your test includes multiple test cases, you can view the report for a single test case by changing the report view...
Unless otherwise noted, cumulative values report the number of occurrences or rates calculated since the start of the test, and per-interval values report the number of occurrences or rates calculated during the interval. You can view either by changing the measurement values...
Elapsed Time is the first measurement on every tab. It reports the amount of time between the start of the test and the end of the report interval.
Test Iteration reports the current iteration in a repeating test session. It is only displayed when a Number of Iterations is defined for the test session.
NOTE: Messages that are re-transmitted after a timeout are not included in sent message counters. |
The following measurements record the messages for each service request/response provided by the NAS.
Minimum Access Response Time — The minimum time, in microseconds, required to respond/acknowledge successful receipt and processing a Request message
Maximum Access Response Time — The maximum time, in microseconds, required to respond/acknowledge successful receipt and processing a Request message
Access Response Count — The number of responses sent by NAS to MN request to access/connect
Minimum Node2 Access Response Time — The minimum time, in microseconds, required to respond/acknowledge successful receipt and processing a Request message (when Alternate Node Authentication is enabled)
Maximum Node2 Access Response Time — The maximum time, in microseconds, required to respond/acknowledge successful receipt and processing a Request message (when Alternate Node Authentication is enabled)
The following measurements record the messages exchanged between the NAS node and all AAA SUTs during authentication and accounting transactions.
The following measurements record the number and type of Access Request messages sent by all NAS nodes, and the associated Access Response or Challenge messages from the SUT when authentication transactions are used in the test.
Access Requests Received — The number of Access Requests messages received from the SUT.
Access Requests Sent — The number of Access Requests messages sent.
Access Accepts Sent — The number of Access Accepts messages sent.
Access Accepts Received — The number of Access Accepts messages received.
Node2 Access Response Count (when Alternate Node Authentication is enabled)
Access Rejects Received — The number of Access Reject messages received from the SUT. An Access Reject will cause the MN session to fail, and the session is left in the pending state. It will also increment the Authentication Failure measurement if that was the reason for the rejection.
Access Challenges Received — The number of Access Challenges messages received from the SUT.
No Matches User Name — The number of No Matches User Name messages received from the SUT.
The following measurements record the number and type of Accounting Request messages sent by all NAS nodes, and the associated Accounting Response messages from the SUT when accounting transactions are used in the test.
Accounting Requests Sent — The number of Accounting Requests messages sent. ( includes Start, Interim Update, and Stop requests)
Accounting Starts Sent — The number of Accounting Starts messages sent.
Accounting Stops Sent — The number of Accounting Stops messages sent.
Accounting Interims Sent — The number of Accounting Interims messages sent.
Accounting Responses Received — The number of Accounting Responses received. (includes Start, Stop, and Interim Update responses)
Accounting Start Response Count — The number of Accounting Start Response messages received.
Accounting Stop Response Count — The number of Accounting Stop Response messages received.
Accounting Interim Response Count — The number of Accounting Interim Response messages received.
Minimum Accounting Start Response Time — The minimum time, in microseconds, required to send a response message to a successful Accounting Request
Maximum Accounting Start Response Time — The maximum time, in microseconds, required to send a response message to a successful Accounting Request
Minimum Accounting Interim Response Time — The minimum time, in microseconds, taken in between transmissions of Accounting Request
Maximum Accounting Interim Response Time — The maximum time, in microseconds, taken in between transmissions of Accounting Request
Minimum Accounting Stop Response Time — The minimum time, in microseconds, to wait after stopping the MN's accounting session before starting a new accounting session.
Maximum Accounting Stop Response Time — The maximum time, in microseconds, The number of seconds to wait after stopping the MN's accounting session before starting a new accounting session.
Access Request Timeouts — The number of times all retry attempts for an Access Request were exhausted. The MN session is left in the pending state.
Accounting Request Timeouts — The number of times all retry attempts for an Accounting Request were exhausted.
Poorly Formed Received — The number of response messages received from the SUT that were incorrectly formatted.
Authentication Failed — The number of Access Rejects that were caused by an authentication failure with the SUT.
The following measurements record the average elapsed time from the NAS node's transmission of a request message to the receipt of the associated response from the SUT.
Average Access Response Time — The Average time, in microseconds, from the NAS node's transmission of a request message to the receipt of the associated response from the SUT.
Average Node2 Access Response Time (when Alternate Node Authentication is enabled)
Average Accounting Start Response Time — The Average time, in microseconds, from the NAS node's transmission of an Accounting Start request message to the receipt of the associated response from the SUT.
Average Accounting Stop Response Time — The Average time, in microseconds, from the NAS node's transmission of an Accounting Stop request message to the receipt of the associated response from the SUT.
Average Accounting Interim Response Time — The Average time, in microseconds, from the NAS node's transmission of an Accounting Interim request message to the receipt of the associated response from the SUT.
The following measurements record the messages exchanged between the NAS SUT and the virtual AAA server during authentication and accounting transactions.
The following measurements record the number of Access Request messages received by the virtual server and the responses sent to the NAS SUT.
Access Requests Received — The total number of Access Requests messages received.
Access Accepts Sent — The total number of Access Requests messages sent.
Access Rejects Sent — An associated error counter is incremented for each Access Reject sent.
Invalid Packets Received — The total number of Invalid Packets messages received.
Total Packets — The total number of packets sent/received.
Total Bytes — The total number of bytes sent/received.
Total Packets/Sec — The total number of packets sent/received per second.
Total Bits/Sec — The total number of Bits sent/received per second.
Total Received Packets Discarded — The total number of Received packets that were discarded.
Total Sent Packets Discarded — The total number of Sent packets that were discarded.
Total Discarded Packets — The total number of Sent/Received packets that were discarded.
The following measurements record the number and type of Accounting Request messages received by the virtual server and the associated Accounting Response messages sent to the NAS SUT.
Accounting Requests Received — The total number of Accounting Requests messages received (includes Start, Interim Update, and Stop requests).
Accounting Starts Received — The total number of Accounting Starts messages received.
Accounting Stops Received — The total number of Accounting Stops messages received.
Accounting Interim Updates Received — The total number of Accounting Interim Updates messages received.
Accounting Responses Sent — The total number of Accounting Responses messages sent (includes Start, Interim Update, and Stop requests).
User Name Mismatches — The number of times an invalid User Name was received in an Access Request from the SUT. This error causes an Access Reject message to be sent to the SUT.
PAP Authentication Failures — The number of times an invalid Password was received in an Access Request from a SUT using PAP authentication. This error causes an Access Reject message to be sent to the SUT.
CHAP Authentication Failures — The number of times an invalid Password was received in an Access Request from a SUT using CHAP authentication. This error causes an Access Reject message to be sent to the SUT.
Poorly Formed Requests — The number of Access Request messages received from the SUT that were incorrectly formatted. An Access Reject is sent in response to a poorly formed Access Request.
Ip Address Allocation Failed — The number of times an attempt to allocate an IP address failed. This error causes an Access Reject messages to be sent to the SUT. The reasons for allocation failures are reported on the IP Pool Manager tab.
Poorly Formed Acct Requests — The number of Accounting Request messages received from the SUT that were incorrectly formatted. An Accounting Response is not returned to the SUT.
Waiting Acct-Start-Req-Msg Timeout — The number of times an IP address was successfully allocated but an Accounting Request-start message was not received before the Wait Acct-Start-Msg Time expired. When a timeout occurs, the address is released back to the IP address pool and can be allocated to another MN.
No Free Accounting Session Errors — The number times an Accounting Request-Start message is received from the SUT after the maximum number of accounting sessions supported by the virtual server have been started. No response is sent to the SUT, and it will experience a timeout.
Sessions Stopped by EAP — The total number of Sessions Stopped by EAP.
Port Identifier Conflict — The total number of Port Identifier Conflict error messages.