Registration Panel
In IP Application Node Testing, the Registration tab provides a means for capturing registration related parameters for B-TrunC DC Interface.
In IP Application Node when B-TrunC DC is selected.
| General Settings | |
Related Measurements
Measurements are collected on the BTrunC | TSM, BTrunC | Call, BTrunC | S1-T report tabs.
General Settings
| DC Number |
Enter DC User. Unique for each DC. Click Default: 12345678#(N0) Tcl Parameter: DcUserNum |
| Secret Key |
Enter Secret key. Click Default: password#(N0) Tcl Parameter: DcSipSubsSecretKey |
| Signaling Port |
Enter the Signaling Port. Range : 1 to 65535 Default: 5060 Tcl Parameter: DcSigPort |
| Terminal Version |
Enter the Terminal Version. Range: 1 to 255 Default: 1 Tcl Parameter: DcTerminalVer |
| Data Query Indication |
Select Data Query Indication. Options : Incremental, Full. Tcl Parameter: DcDataQueryInd |
| T-CN IP Address |
Enter Valid IPv4/IPv6 address for the T-CN. Tcl Parameter: DcTcnIpAddr |
| T-CN Domain Name |
Enter T-CN Domain Name. Default: spirent.com Tcl Parameter: DcTcnDomainName |
| T-CN Port |
Enter T-CN Port. Range: 1 to 65535 Default: 5060 Tcl Parameter: DcTcnPort |
| Enable Heartbeat Timer (s) |
Select to enable Heartbeat Timer in seconds. Range: 1 to 65535 Default: 60 Tcl Parameter: DcOptionsEn Tcl Parameter: DcOptionsTimer |
| Enable Call Setup |
Select to enable CALL Panel tab. Tcl Parameter: DcCallSetupEn |
| Registration Start |
Select to Registration Start. Options: When All Sessions Established, When Session Established Default: When All Sessions Established Tcl Parameter: DcRegStart |
| Expires (s) |
Enter Expires timer in seconds. Range: 0 to 4294967295 Default: 3600 Tcl Parameter: DcRegExpires |
| Retry Timeout (s) |
Enter Retry Time out. Range: 0 to 65535 Default: 5 Tcl Parameter: DcRegTimeout |
| Number of Retries |
Enter Number of Retries. Range: 0 to 5 Default: 3 Tcl Parameter: DcRegRetries |
| Registration Rate (reg/s) |
Enter Registration Rate in seconds. Range: 0.001 to 1000.0 Default: 1000.0 Tcl Parameter: DcRegRate |
| Registration Delay (s) |
Enter Registration Delay. Range: 1.0 to 65535.0 Default: 1.00 Tcl Parameter: DcRegDelay |
to use the