The test system Auto-Increment wizard generates unique parameter values based on the values you select or enter.
Resulting Text |
The Resulting Text is the value displayed in the parameter based on the values you enter/select on the Auto-increment Format Wizard window. For example, in MME Nodal test case, the auto-increment resulting text on Phonebook > SIP Subscriber > Public User Name is user#(N0). Where:
The Resulting text is generated based on the values you enter/select in the Base Text, Offset, Type, Starting Value, # of Repeats, Increment, and Padding. The following rules apply for integer, IP address and Prefix/Subnet:
Where:
|
|||||||||||||||
Base Text |
Indicates the name/text that appears in the parameter and is the initial value (non-incremented) for the Parameter (resulting text).
|
|||||||||||||||
Offset |
Offset is not available if Type is None (Do Not Increment). The parameter indicates the position of the auto-increment value. That is, whether the auto-increment value is a prefix, suffix, or within the base text. For example, if the Base Text is user, the auto-increment value is positioned as follows according to the Offset value you select.
|
|||||||||||||||
Type |
Select the type of incrementer you want to use or incrementing you want to happen.
Example : IP Addresses |
|||||||||||||||
Increment Options The Increment Options parameters are not available if Type is None (Do Not Increment). |
||||||||||||||||
Starting Value
|
The starting value in an incrementing field, for integer, any value, for IP can be v4 or v6 Select the parameter value to provide incrementing Decimal or Hexadecimal values. #N(0x<HEX STARTING VALUE)….
|
|||||||||||||||
# of Repeats |
The number of times to duplicate a value, that is whether to repeat once, twice, and so on. Valid range is 0 - 255. The number of times to repeat the value,
|
|||||||||||||||
Increment |
The value to increment (increase or decrease) each time, valid range 1 to 255. |
|||||||||||||||
Padding |
Indicates the number of digits displayed. Select Padding and increment the values as required. The incremented value is prefixed with 0’s until the number of digits is equal to Padding value. Valid values is 1-50. |
|||||||||||||||
Preview Show 2000 Values |
Displays the value of the parameter based on the auto-increment values. By default a maximum of 100 values are displayed and you may display up to 2000 values by selecting Show 2000 Values. |