Ut APP


Ut App Client tab is used in MME nodal when Ut/Ub Interface is enabled.

Traffic Pattern

 

 

 

 

User Identities

 

 

 

 

 

HTTP Digest

 

 

NAF Server

 

 

 

Related Measurements

Measurements collected on MME Nodal Ua Ub|1xx, Ua Ub|2xx, Ua Ub|3xx, Ua Ub|4xx, Ua Ub|5xx report tabs.


Ut App Settings

Local Port

Local Server port for Ut XCAP Client.

Range 0 to 65535

Default = 6000

Tcl Parameter: UaClnPort

Enable TLS

Select to enable TLS Tab.

Tcl Parameter: UaClnTlsEn

APN

Enter APN.

Default: APN 0

Tcl Parameter: UaClnApn

Traffic Pattern

Select the Traffic Pattern.
Traffic Start

Select "When All Sessions Established" (default) or "When Session Established".

Tcl Parameter: UaClnStart

Continuous

Select for continuous traffic.

Default: false

Tcl Parameter: UaClnContinuousEn

Start Delay (s)

Enter Start delay in seconds.

Range: 0 to 65535

Default: 5

Tcl Parameter: UaClnStartDelay

Start Rate (sess/s)

Enter Start Rate in session per seconds. Available when Traffic Start = "When All sessions Established".

Range: 0.001 to 1000.0

Default: 1.0

Tcl Parameter: UaClnStartRate

Rate (loop/s)

Enter Rate in loop per seconds. Available when Continuous traffic is enabled.

Range: 0.001 to 1000.0

Default: 1.0

Tcl Parameter: UaClnRate

 

Public User Name

User Identities configuration is only enabled when VoLTE is NOT enabled. Otherwise, the User Identities from the Phonebook Tab are used.

Public User Name for XCAP Client server. Only one User Name is required and it is not configured to any service bearers.

Range : Up to 128 Char.

Default = User#(N0)

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: UaClnPublicUserName

Private User Name

User Identities configuration is only enabled when VoLTE is NOT enabled. Otherwise, the User Identities from the Phonebook Tab are used.

Private User Name for XCAP Client server. Only one User Name is required and it is not configured to any service bearers.

NOTE: The default value displayed depends on whether you select Decimal or Hexadecimal in the Parameter Auto-increment Wizard window.

Default: user#(N0); user#(N0x0) 

Tcl Parameter: UaClnPrivateUserName

Password

User Identities configuration is only enabled when VoLTE is NOT enabled. Otherwise, the User Identities from the Phonebook Tab are used.

Password for XCAP Client server. Only one Password is required and it is not configured to any service bearers.

Range : Up to 128 Char.

Default = password#(N0)

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: UaClnPassword

Nonce

Client Nonce used in HTTP Digest Authentication.

Range up to 128 Chars

Tcl Parameter: UaClnCNonce

Nonce Count

Nonce Count used in HTTP Digest Authentication.

Range from 0 to 2147483647

Default = 0

Tcl Parameter: UaClnNonceCnt

NAF Server

Enter Root URI.

Maximum of 128 characters.

Default: http://10.202.100.1/rem/sentinel/xcap

Tcl Parameter: UaClnRootUri

Enter AUID.

Maximum of 128 characters.

Default: simservs.ngn.etsi.org

Tcl Parameter: UaClnAuId