Smf to Pcf NF Tab
The Smf to Pcf NF (Network Function) Consumer tab is available when Test PCF (Npcf), From SMF (N7) is selected on Service Based Nodal test case and SMF Node Emulator Cnfg when N7 Interface is selected. About the 5G Application.
Additional details for 5G side for N11/N7/N4 interworking and 4G side for S11/S5/S8/N7/N4 interworking can be found in this section - N7 Interface.
Per 3GPP TS 23.501, 23.502 and 29.5xx.
Related Measurements
Measurements collected for Service Based Node related processing are reported on the SMF-PCF Consumer report tab.
|
|
|
Summary Summary / Individual (DNN 1 to 11)
|
Summary / Individual (DNN 1 to 11)
|
|
Subscribed Default QoS Information Subscribed Default QoS
|
Subscribed Default QoS Information Subscribed Default QoS |
|
|
|
|
Summary / Individual (DNN 1 to 11)
|
Summary / Individual (DNN 1 to 11)
|
|
Summary / Individual (DNN 1 to 11)
|
Summary / Individual (DNN 1 to 11)
|
|
Summary / Individual (DNN 1 to 11) |
Summary / Individual (DNN 1 to 11) |
|
Summary / Individual (DNN 1 to 11)
User Location Change |
Summary / Individual (DNN 1 to 11)
User Location Change |
|
Summary / Individual (DNN 1 to 11)
Subscribed Default QoS Information Change |
Summary / Individual (DNN 1 to 11)
Subscribed Default QoS Information Change
|
|
Summary / Individual (DNN 1 to 11) |
Summary / Individual (DNN 1 to 11) |
|
Summary / Individual (DNN 1 to 11)
|
Summary / Individual (DNN 1 to 11)
|
NF Consumer
Available when Test PCF (Npcf), From SMF (N7) is selected on Service Based Nodal test case on Interface Amf-PCF.
|
Select the Npcf Version. Available on SMF Node Emulator Cnfg when N7 Interface is selected. AMF-PCF, NEF-PCF and SMF-PCF must use the same Npcf Consumer Version. Options: 15.2.0/Dec2018 (default) , 15.4.0/Jun2019, 16.7.0/Mar2021, 17.7.0/Jun2022 Tcl Parameter: N7NpcfSbiVersion |
|||||||||||
|
Select “Use Access Token” option to support OAuth2 authorization for NF Consumer. Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF per spec TS 29.510 V16.3.0 section 5.4.2.2.1.
Select to enter Access Token. Enter up to 1023 characters Tcl Parameter: N7NpcfUseAccTokEn Tcl Parameter: N7NpcfAccTokEn Tcl Parameter: N7NpcfAccTok |
|||||||||||
|
Select to include the Custom Http headers for Origination Timestamp and Max Response Time.
Npcf_SMPolicyControl_Create Request (pcfSMPolicyControlCreateReq) generated via the N7 (SMF-PCF) interface on Service Based Nodal test case will include these fields in the header. Enter Max response Time in milliseconds. Range : 1 to 60000 Default : 1 Tcl Parameter: N7Npcf3gppSbiOrigTimestampEn Tcl Parameter: N7Npcf3gppSbiOrigTimestamp |
|||||||||||
|
Enter the number of PRA IDs (up to 4, default is 1) and enter the PRA ID. Range : 1 to 255 characters Default : pres_info_1, pres_info_2, pres_info_3, pres_info_4 Tcl Parameter: N7NpcfPraIdNum Tcl Parameter: N7NpcfPraId_1 Tcl Parameter: N7NpcfPraId_2 Tcl Parameter: N7NpcfPraId_3 Tcl Parameter: N7NpcfPraId_4 |
|||||||||||
| Partial Success Report |
Enter the Number of Partial Success Reports (up to 1, default is 1) and enter the Partial Success details. Available when Npcf Version (29.507/29.512/29.514/29.525) >= 16.7.0/Mar2021 Tcl Parameter: N7NpcfNewPartialSuccessReport
|
||||||||||
| Redirection Settings |
Select Redirection Settings to enter the Location and Target NF Instance ID. Available when Npcf Version (29.507/29.512/29.514/29.525) >= 16.7.0/Mar2021 Enter a valid IPv4 address for Location. Default : 1.1.1.1 Select to enter a Target NF Instance ID. Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet Tcl Parameter: N7NpcfSmfRedirectSettingEn Tcl Parameter: N7NpcfSmfRedirectLoc Tcl Parameter: N7NpcfSmfRedirectInstIdEn Tcl Parameter: N7NpcfSmfRedirectInstId |
||||||||||
| DNN with Starting SUPI via TDF |
Select "DNN with Starting SUPI Mode via TDF" to allocate the SUPI from the DNN entry in the TDF file. Each Row (Multiplier Label) is a different DNN. SBI Node can support up to 1500 unique DNNs. The SUPI values will be allocated based on the STARTING_SUPI and its range of each DNN entry from this TDF file. The available columns of TDF file is:
STARTING_SUPI shall be numeric, at most 15 digts. SUPI_RANGE shall be numeric, in range 1..2147483647. PDU_INDEX shall be numeric, and in range 1..11. NSSAI has format as ([0-9][0-9]*)(-)([0-9a-f][0-9a-f])* or ([0-9][0-9])*, the first part is SST which value is from 0 to 255, the second part is SD which value is from 1 to 6 Hex characters, the two parts are combined with '-', and the first part shall be mandatory, the second part can be optional. DNN_NAME contains up to 63 characters, at least one character.
Tcl Parameter: N7NpcfDnnSupiCfgFileEn Tcl Parameter: N7NpcfDnnSupiCfgFile |
||||||||||
|
Enter up to 11 Protocol Data Unit (PDU) Sessions. Enter up to 11 DNNs (Data Network Name). DNN is equivalent to APN. Tcl Parameter: N7NpcfPduSessionCnt |
|||||||||||
|
Select 3GPP PS Data Off Status. Tcl Parameter: N7Npcf3gppPsDataOffStatus |
|||||||||||
|
Select Summary or Individual DNN Assignment. Tcl Parameter: N7NpcfDnnSummaryEn |
|||||||||||
|
Available if Individual DNN Assignment is selected. Up to 11 (based on Number of PDU Sessions) DDN panes will be enabled for input. Tcl Parameter: N7NpcfDnnIndivToView |
|||||||||||
|
If Summary assignment was selected, the DNN Assignment panes becomes available for input. Select Auto-Incremental DNN and Enter DNN.
or Manually Specify DNNs. A table of up to 11 entries become available to key in the DNNs. Tcl Parameter: N7NpcfDnnSumAutoDnn Tcl Parameter: N7NpcfDnnSumManuEn Tcl Parameter: N7NpcfDnnSumManu_1 |
|||||||||||
|
Enter the PDU Session ID. Tcl Parameter: N7NpcfDnnSumPduSessionId Tcl Parameter: N7NpcfDnnIndivPduSessionId_1 |
|||||||||||
|
Select the PDU Session Type. Options: IPV4 (default), IPV6 ,IPV4V6 , UNSTRUCTURED, ETHERNET. Note: The option order, as well as the default value, was changed in Release 19.0. Default is now IPV4. Tcl Parameter: N7NpcfDnnSumPduSessionType Tcl Parameter: N7NpcfDnnIndivPduSessionType_1 |
|||||||||||
|
Select the Charging type. Option: Online (default) , Offline Tcl Parameter: N7NpcfDnnSumChargingType Tcl Parameter: N7NpcfDnnIndivChargingType_1 |
|||||||||||
|
Select to enter Time Zone. Unrestricted text field. Tcl Parameter: N7NpcfDnnSumTimeZone Tcl Parameter: N7NpcfDnnIndivTimeZone_1 |
|||||||||||
| Number of Packet Filters |
Enable to select to enter the number of Packet Filters. Range: 1 to 127 Default: 1 Unrestricted text field. Tcl Parameter: N7NpcfDnnSumNumOfPackFiltersEn Tcl Parameter: N7NpcfDnnSumNumOfPackFilters Tcl Parameter: N7NpcfDnnIndivNumOfPackFiltersEn_1 Tcl Parameter: N7NpcfDnnIndivNumOfPackFilters_1 |
||||||||||
| IPv4 Domain identifier |
Select to enter IPv4 Domain Identifier. Unrestricted text. Tcl Parameter: N7NpcfDnnSumIpv4DomIdEn Tcl Parameter: N7NpcfDnnSumIpv4DomId Tcl Parameter: N7NpcfDnnIndivIpv4DomIdEn_1 Tcl Parameter: N7NpcfDnnIndivIpv4DomId_1 |
||||||||||
| Charging Characteristics |
Select to enter Charging Characteristics. In release 19.2, the data entry requirements changed from "Unrestricted text" to requiring 4 Hex characters. Tcl Parameter: N7NpcfDnnSumChargCharEn Tcl Parameter: N7NpcfDnnSumChargChar Tcl Parameter: N7NpcfDnnIndivChargCharEn_1 Tcl Parameter: N7NpcfDnnIndivChargChar_1 Tcl Parameter: N7NpcfDnnSumChargChaValue Tcl Parameter: N7NpcfDnnIndivChargChaValue_1 |
||||||||||
| QoS Flow Usage |
Select to QoS Flow Usage. Select GENERAL (default) or IMS_SIG. In release 19.2, the data entry requirements changed from "Unrestricted text" to options : GENERAL, IMS_SIG. Tcl Parameter: N7NpcfDnnSumQosFlowUsageEn Tcl Parameter: N7NpcfDnnSumQosFlowUsage Tcl Parameter: N7NpcfDnnIndivQosFlowUsageEn_1 Tcl Parameter: N7NpcfDnnIndivQosFlowUsage_1 Tcl Parameter: N7NpcfDnnSumQosFlowUseEn Tcl Parameter: N7NpcfDnnSumQosFlowUse Tcl Parameter: N7NpcfDnnIndivQosFlowUseEn_1 Tcl Parameter: N7NpcfDnnIndivQosFlowUse_1 |
||||||||||
| SST |
Enter the SST (Slice / Service Type). Range: 0 to 255 Default: 0 Tcl Parameter: N7NpcfDnnSumSst Tcl Parameter: N7NpcfDnnIndivSst_1 |
||||||||||
|
Select to enter the Sd (Slice Differentiator). Range: Hex-string , 1 to 6 Hex characters Default: 0 Tcl Parameter: N7NpcfDnnSumSdEn Tcl Parameter: N7NpcfDnnSumSd Tcl Parameter: N7NpcfDnnIndivSdEn_1 Tcl Parameter: N7NpcfDnnIndivSd_1 |
|||||||||||
|
Select t to include the Reflective QoS Indicator. Tcl Parameter: N7NpcfDnnSumRefQosIndicationEn Tcl Parameter: N7NpcfDnnIndivRefQosIndicationEn_1 |
|||||||||||
|
Uplink Downlink |
Select to enter AMBR Uplink and Downlink. Range: 1 to 16776960000 Default: 1000 Range: bps, kbps, Mbps (default), Gbps, Tbps Default: Mbps Tcl Parameter: N7NpcfDnnSumAmbrUplink Tcl Parameter: N7NpcfDnnIndivAmbrUplink_1 Tcl Parameter: N7NpcfDnnSumAmbrUlUnit Tcl Parameter: N7NpcfDnnIndivAmbrUlUnit_1 Tcl Parameter: N7NpcfDnnSumAmbrDownlink Tcl Parameter: N7NpcfDnnIndivAmbrDownlink_1 Tcl Parameter: N7NpcfDnnSumAmbrDownUnit Tcl Parameter: N7NpcfDnnIndivAmbrDownUnit_1 |
||||||||||
|
IPv4 IPv6 Prefix Interface ID |
Select to enter a UE IP Address. Enter a valid IPv4 and/or IPv6 Prefix address type. Enter the Interface ID so AF can signal a full /128 IPv6 address. Default is :1:1:1:1 Tcl Parameter: N7NpcfDnnSumIpv4En Tcl Parameter: N7NpcfDnnSumIpv4Address Tcl Parameter: N7NpcfDnnIndivIpv4En_1 Tcl Parameter: N7NpcfDnnIndivIpv4Address_1 Tcl Parameter: N7NpcfDnnSumIpv6En Tcl Parameter: N7NpcfDnnSumIpv6Address Tcl Parameter: N7NpcfDnnIndivIpv6En_1 Tcl Parameter: N7NpcfDnnIndivIpv6Address_1 Tcl Parameter: N7NpcfDnnSumIntfIdEn Tcl Parameter: N7NpcfDnnSumIntfId Tcl Parameter: N7NpcfDnnIndivIntfIdEn_1 Tcl Parameter: N7NpcfDnnIndivIntfId_1 |
||||||||||
|
Select to enter the Access Type. Options: 3GPP_ACCESS (default), NON_3GPP_ACCESS Tcl Parameter: N7NpcfDnnSumAccessType Tcl Parameter: N7NpcfDnnIndivAccessType_1 |
|||||||||||
|
Select to enter the RAT (Radio Access Technology) Type. NR = New Radio, EUTRA = Evolved Universal Terrestrial Radio Access Options: NR (default), EUTRA, WLAN, Virtual Tcl Parameter: N7NpcfDnnSumRatType Tcl Parameter: N7NpcfDnnIndivRatType_1 |
|||||||||||
|
Enter the User Location. Select Enable User Location to update the following fields. Tcl Parameter: N7NpcfDnnSumUliEn Tcl Parameter: N7NpcfDnnIndivUliEn
|
Subscribed Default QoS Information
Supported Features
|
Supported Features |
Select Enabled to select the supported features from the table or select Set All to select all features. Clear All will clear any selected item. See the full list below for the latest version. However, not all values are supported for every Npcf Version (29.507/29.512/29.514/29.525) . Reference : 3GPP 29.312 version 16.7
Tcl Parameter: N7NpcfDnnSumSupportedFeatures_1 Tcl Parameter: N7NpcfDnnIndivSupportedFeatures_1_1 |
Network Access Charging Identifier
|
Enter the charging identifier. Range: 0 to 4294967295 Default: 0 Tcl Parameter: N7NpcfDnnSumAccNetChaIdValue Tcl Parameter: N7NpcfDnnIndivAccNetChaIdValue_1 |
|
|
Enter the number of Rule IDs (Up to 16). Range: 1 to 16. Enter Rule ID Name in the table. Tcl Parameter: N7NpcfDnnSumNumRuleIds Tcl Parameter: N7NpcfDnnIndivNumRuleIds_1 Tcl Parameter: N7NpcfDnnSumPccRuleId_1 Tcl Parameter: N7NpcfDnnIndivPccRuleId_1_1 |
|
|
Select to Apply to the Whole PDU Session. Tcl Parameter: N7NpcfDnnSumSessionChScope Tcl Parameter: N7NpcfDnnIndivSessionChScope_1 |
App Detection
Available when Npcf Version (29.507/29.512/29.514/29.525) >= 16.7.0/Mar2021
|
Select to indicate invalid SUPI. Tcl Parameter: N7NpcfDnnSumInvalidSupi Tcl Parameter: N7NpcfDnnIndivInvalidSupi_1 |
|
|
Enable to select DNN Selection Mode. Options : VERIFIED (default), UE_DNN_NOT_VERIFIED, NW_DNN_NOT_VERIFIED Tcl Parameter: N7NpcfDnnSumDnnSelectionModeEn Tcl Parameter: N7NpcfDnnIndivDnnSelectionModeEn_1 Tcl Parameter: N7NpcfDnnSumDnnSelectionMode Tcl Parameter: N7NpcfDnnIndivDnnSelectionMode_1 |
|
|
Select to include Additional Access Info. Select the Access Type. Options : 3GPP_ACCESS (default), NON_3GPP_ACCESS Select to include the RAT Type. Options : NR, EUTRA, WLAN, VIRTUAL Tcl Parameter: N7NpcfDnnSumAddAccessInfoEn Tcl Parameter: N7NpcfDnnIndivAddAccessInfoEn_1 Tcl Parameter: N7NpcfDnnSumAddAccessInfoAccessType Tcl Parameter: N7NpcfDnnIndivAddAccessInfoAccessType_1 Tcl Parameter: N7NpcfDnnSumAddAccessInfoRatTypeEn Tcl Parameter: N7NpcfDnnIndivAddAccessInfoRatTyepeEn_1 Tcl Parameter: N7NpcfDnnSumAddAccessInfoRatType Tcl Parameter: N7NpcfDnnIndivAddAccessInfoRatType_1 |
|
|
Enable to select Authorization Profile Index. Default : index1 Tcl Parameter: N7NpcfDnnSumAuthProfIndexEn Tcl Parameter: N7NpcfDnnIndivAuthProfIndexEn_1 Tcl Parameter: N7NpcfDnnSumAuthProfIndex Tcl Parameter: N7NpcfDnnIndivAuthProfIndex_1 |
|
|
Select to include the MA PDU Session Indication. Options : MA_PDU_REQUEST, MA_PDU_NETWORK_UPGRADE_ALLOWED Tcl Parameter: N7NpcfDnnSumMaPduIndicationEn Tcl Parameter: N7NpcfDnnIndivMaPduIndicationEn_1 Tcl Parameter: N7NpcfDnnSumMaPduIndication Tcl Parameter: N7NpcfDnnIndivMaPduIndication_1 |
|
|
Select to include the ATSSS (Access Traffic Steering, Switching and Splitting) Capability. Options : MPTCP_ATSSS_LL_WITH_ASMODE_UL, MPTCP_ATSSS_LL_WITH_EXSDMODE_DL_ASMODE_UL, MPTCP_ATSSS_LL_WITH_ASMODE_DLUL, ATSSS_LL ,MPTCP_ATSSS_LL Tcl Parameter: N7NpcfDnnSumAtsssCapabilityEn Tcl Parameter: N7NpcfDnnIndivAtsssCapabilityEn_1 Tcl Parameter: N7NpcfDnnSumAtsssCapability Tcl Parameter: N7NpcfDnnIndivAtsssCapability_1 |
|
| IPv4 Frame Route List |
Enter up to 8 IPv4 Frame Route Lists. Enter valid a IPv4 Address Mask. Default : 198.51.0.0/16 Tcl Parameter: N7NpcfDnnSumIpv4FrameRouteListCnt Tcl Parameter: N7NpcfDnnIndivIpv4FrameRouteListCnt_1 Tcl Parameter: N7NpcfDnnSumIpv4FrameRouteList_1 Tcl Parameter: N7NpcfDnnIndivIpv4FrameRouteList_1_1 |
| IPv6 Frame Route List |
Enter up to 8 IPv6 Frame Route Lists. Enter valid a IPv6 Address Mask. Default : 2001:db8:abcd:12::0/64 Tcl Parameter: N7NpcfDnnSumIpv6FrameRouteListCnt Tcl Parameter: N7NpcfDnnIndivIpv6FrameRouteListCnt_1 Tcl Parameter: N7NpcfDnnSumIpv6FrameRouteList_1 Tcl Parameter: N7NpcfDnnIndivIpv6FrameRouteList_1_1 |
User Location Change
|
Select to enter Time Zone. Unrestricted text field. Tcl Parameter: N7NpcfDnnSumNewTimeZone Tcl Parameter: N7NpcfDnnIndivNewTimeZone_1 |
|||||||||||
|
Select to enter the RAT (Radio Access Technology) Type. NR = New Radio, EUTRA = Evolved Universal Terrestrial Radio Access Options: NR (default), EUTRA, WLAN, Virtual Tcl Parameter: N7NpcfDnnSumNewRatType Tcl Parameter: N7NpcfDnnIndivNewRatType_1 |
|||||||||||
|
Select to enter the Access Type. Options: 3GPP_ACCESS (default), NON_3GPP_ACCESS Tcl Parameter: N7NpcfDnnSumNewAccessInfoAccessType Tcl Parameter: N7NpcfDnnIndivNewAccessInfoAccessType_1 |
|||||||||||
|
Enter the User Location.
|
Subscribed Default QoS Information Change
|
Enter the new 5Qi. Range: 0 to 255 Tcl Parameter: N7NpcfDnnIndivNewDefQos5Qi_1 Tcl Parameter: N7NpcfDnnSumNewDefQos5Qi |
|
|
Select tp enter the new 5Qi Priority level. Range: 1 to 15 Default: 5 Tcl Parameter: N7NpcfDnnSumNewDefPriorityLevelEn Tcl Parameter: N7NpcfDnnSumNewDefPriorityLevel Tcl Parameter: N7NpcfDnnIndivNewDefPriorityLevelEn_1 Tcl Parameter: N7NpcfDnnIndivNewefPriorityLevel_1 |
|
|
Enter the new ARP (Allocation and Retention Priority). Enter Priority Level. Range: 1 to 15, Default : 1 Select to enable Preemption Capability. Select to enable Preemption Vulnerability. Tcl Parameter: N7NpcfDnnIndivNewDefArpPriorityLevel_1 Tcl Parameter: N7NpcfDnnSumNewDefArpPriorityLevel Tcl Parameter: N7NpcfDnnIndivNewDefArpPreemCapaEn_1 Tcl Parameter: N7NpcfDnnSumNewDefArpPreemCapaEn Tcl Parameter: N7NpcfDnnIndivNewDefArpPreemVulnEn_1 Tcl Parameter: N7NpcfDnnSumNewDefArpPreemVulnEn |
Available when Npcf Version (29.507/29.512/29.514/29.525) >= 16.7.0/Mar2021
|
Select to include Added Access Info. Select the Access Type. Options : 3GPP_ACCESS (default), NON_3GPP_ACCESS Select to include the RAT Type. Options : NR, EUTRA, WLAN, VIRTUAL Tcl Parameter: N7NpcfDnnSumNewAddedAccessInfoEn Tcl Parameter: N7NpcfDnnIndivNewAddedAccessInfoEn_1 Tcl Parameter: N7NpcfDnnSumNewAddedAccessInfoAccessType Tcl Parameter: N7NpcfDnnIndivNewAddedAccessInfoAccessType_1 Tcl Parameter: N7NpcfDnnSumNewAddedAccessInfoRatTypeEn Tcl Parameter: N7NpcfDnnIndivNewAddedAccessInfoRatTyepeEn_1 Tcl Parameter: N7NpcfDnnSumNewAddedAccessInfoRatType Tcl Parameter: N7NpcfDnnIndivNewAddedAccessInfoRatType_1 |
|
|
Select to include Release Access Info. Select the Access Type. Options : 3GPP_ACCESS (default), NON_3GPP_ACCESS Select to include the RAT Type. Options : NR, EUTRA, WLAN, VIRTUAL Tcl Parameter: N7NpcfDnnSumNewRelAccessInfoEn Tcl Parameter: N7NpcfDnnIndivNewRelAccessInfoEn_1 Tcl Parameter: N7NpcfDnnSumNewRelAccessInfoAccessType Tcl Parameter: N7NpcfDnnIndivNewRelAccessInfoAccessType_1 Tcl Parameter: N7NpcfDnnSumNewRelAccessInfoRatTypeEn Tcl Parameter: N7NpcfDnnIndivNewRelAccessInfoRatTyepeEn_1 Tcl Parameter: N7NpcfDnnSumNewRelAccessInfoRatType Tcl Parameter: N7NpcfDnnIndivNewRelccessInfoRatType_1 |
|
|
Select to include Ipv4 Domain Identifier. Default : domain1 Tcl Parameter: N7NpcfDnnSumNewIpv4DomIdValueEn Tcl Parameter: N7NpcfDnnIndivNewIpv4DomIdValueEn_1 Tcl Parameter: N7NpcfDnnSumNewIpv4DomIdValue Tcl Parameter: N7NpcfDnnIndivNewIpv4DomIdValue |
|
| Served UE IPv6 Prefixes |
Enter up to 8 Served UE IPv6 Prefixes. Enter a valid Pv6 Address Mask. Default : 2001:db8:abcd:12::0/64 Tcl Parameter: N7NpcfDnnSumNewSavedUeIpv6Prefix Tcl Parameter: N7NpcfDnnIndivNewSavedUeIpv6Prefix_1 Tcl Parameter: N7NpcfDnnSumNewSavedUeIpv6PrefixNum_1 Tcl Parameter: N7NpcfDnnIndivNewSavedUeIpv6PrefixNum_1_1 |
| Served UE Released IPv6 Prefixes |
Enter up to 8 Served UE Released IPv6 Prefixes. Enter a valid Pv6 Address Mask. Default : 2001:db8:abcd:12::0/64 Tcl Parameter: N7NpcfDnnSumNewSavedUeReleasedIpv6Prefix Tcl Parameter: N7NpcfDnnIndivNewSavedUeReleasedIpv6Prefix_1 Tcl Parameter: N7NpcfDnnSumNewSavedUeReleasedIpv6PrefixNum_1 Tcl Parameter: N7NpcfDnnIndivNewSavedUeReleasedIpv6PrefixNum_1_1 |
| # of DDD Traffic Descriptors |
Enter up to 8 DDD Traffic Descriptors. Enter IPv4 Addr, Enter IPv6 Addr, MAC Addr, Port Tcl Parameter: N7NpcfDnnSumNewTrfDspCnt Tcl Parameter: N7NpcfDnnIndivNewTrfDspCnt_1 Tcl Parameter: N7NpcfDnnSumNewTrfDspIpv4Addr_1 Tcl Parameter: N7NpcfDnnIndivNewTrfDspIpv4Addr_1_1 Tcl Parameter: N7NpcfDnnSumNewTrfDspIpv6Addr_1 Tcl Parameter: N7NpcfDnnIndivNewTrfDspIpv6Addr_1_1 Tcl Parameter: N7NpcfDnnSumNewTrfDspMacAddr_1 Tcl Parameter: N7NpcfDnnIndivNewTrfDspMac4Addr_1_1 Tcl Parameter: N7NpcfDnnSumNewTrfDspPort_1 Tcl Parameter: N7NpcfDnnIndivNewTrfDspPort_1_1 |
Presence Information
|
Select the number of Presence Information. Not available if Number of Presence Information is enabled in interface AMF-PCF. Select for PCF test with SMF emulation to support "Core Network predefined Presence Reporting Area" and send PraInfos with TAI list in pcfSMPolicyControlUpdateReq without having to get TAI list in SmPolicyControlCreateRsponse first. Range: 1 to 4 Tcl Parameter: N7NpcfPreseNumber
|