The NF Services tab is used in the Service Based Node test case when Emulate UDM (Nudm) or AUSF (Nausf) and is enabled and on SMF Node Emulator Configuration.
Per 3GPP TS 23.003, 23.501, 23.502 and 29.510x.
NF Services (Nudm) |
NF Services (Nausf) nausf-auth, nausf-sorprotection, nausf-upupprotection
|
NF Services (Nsmf) |
Specify Services |
Select Specify services to enable capture of data for the panes listed below. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on UDM SBI Node or Available when "Number of IPs per NF Instance" or "NF Set ID" is enabled on AUSF SBI Node. Example : nausf-auth, nudm-sdm, nudm-ee, etc Tcl Parameter: NausfSpecSvcEn Tcl Parameter: NudmSpecSvcEn |
nudm-sdm |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nudm-sdm. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Reference : 29.503 Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on UDM SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in UDM SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NudmSdmSpecSvcPortEn Tcl Parameter: NudmSdmSpecSvcSetIdEn Tcl Parameter: NudmSdmNumSvclns Tcl Parameter: NudmSdmSvcIpIdx_1 Tcl Parameter: NudmSdmSvcPort_1 Tcl Parameter: NudmSdmSvcSetId_1 Tcl Parameter: NudmSdmBindLevelEn Tcl Parameter: NudmSdmBindLevel |
nudm-uecm |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nudm-uecm. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Reference : 29.503 Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on UDM SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in UDM SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NudmUecmSpecSvcPortEn Tcl Parameter: NudmUecmSpecSvcSetIdEn Tcl Parameter: NudmUecmNumSvclns Tcl Parameter: NudmUecmSvcIpIdx_1 Tcl Parameter: NudmUecmSvcPort_1 Tcl Parameter: NudmUecmSvcSetId_1 Tcl Parameter: NudmUecmBindLevelEn Tcl Parameter: NudmUecmBindLevel |
nudm-ueau |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nudm-ueau. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on UDM SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in UDM SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NudmUeauSpecSvcPortEn Tcl Parameter: NudmUeauSpecSvcSetIdEn Tcl Parameter: NudmUeauNumSvclns Tcl Parameter: NudmUeauSvcIpIdx_1 Tcl Parameter: NudmUeauSvcPort_1 Tcl Parameter: NudmUeauSvcSetId_1 Tcl Parameter: NudmUeauBindLevelEn Tcl Parameter: NudmUeauBindLevel |
nudm-ee |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nudm-ee. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on UDM SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in UDM SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NudmEeSpecSvcPortEn Tcl Parameter: NudmEeSpecSvcSetIdEn Tcl Parameter: NudmEeNumSvclns Tcl Parameter: NudmEeSvcIpIdx_1 Tcl Parameter: NudmEeSvcPort_1 Tcl Parameter: NudmEeSvcSetId_1 Tcl Parameter: NudmEeBindLevelEn Tcl Parameter: NudmEeBindLevel |
nudm-pp |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nudm-pp. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on UDM SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in UDM SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NudmPpSpecSvcPortEn Tcl Parameter: NudmPpSpecSvcSetIdEn Tcl Parameter: NudmPpNumSvclns Tcl Parameter: NudmPpSvcIpIdx_1 Tcl Parameter: NudmPpSvcPort_1 Tcl Parameter: NudmPpSvcSetId_1 Tcl Parameter: NudmPpBindLevelEn Tcl Parameter: NudmPpBindLevel |
nausf-auth |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nausf-auth. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on AUSF SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in AUSF SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page.
Tcl Parameter: NausfAuthSpecSvcPortEn Tcl Parameter: NausfAuthSpecSvcSetIdEn Tcl Parameter: NausfAuthNumSvclns Tcl Parameter: NausfAuthSvcIpIdx_1 Tcl Parameter: NausfAuthSvcPort_1 Tcl Parameter: NausfAuthSvcSetId_1 Tcl Parameter: NausfAuthBindLevelEn Tcl Parameter: NausfAuthBindLevel |
nausf-sorprotection |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nausf-sorprotection. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on AUSF SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in AUSF SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NausfSorpSpecSvcPortEn Tcl Parameter: NausfSorpSpecSvcSetIdEn Tcl Parameter: NausfSorpNumSvclns Tcl Parameter: NausfSorpSvcIpIdx_1 Tcl Parameter: NausfSorpSvcPort_1 Tcl Parameter: NausfSorpSvcSetId_1 Tcl Parameter: NausfSorpBindLevelEn Tcl Parameter: NausfSorpBindLevel |
nausf-upupprotection |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nausf-upupprotection. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nudm-sdm. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on AUSF SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Enable Binding Level to select the type : NF Set, NF Instance (default), NF Service Set ,NF Service Instance. NF Set can be selected only when "NF Set ID" is configured in AUSF SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NausfUpupSpecSvcPortEn Tcl Parameter: NausfUpupSpecSvcSetIdEn Tcl Parameter: NausfUpupNumSvclns Tcl Parameter: NausfUpupSvcIpIdx_1 Tcl Parameter: NausfUpupSvcPort_1 Tcl Parameter: NausfUpupSvcSetId_1 Tcl Parameter: NausfUpupBindLevelEn Tcl Parameter: NausfUpupBindLevel |
nsmf-pdusession |
Select Specify Service Port to enable the capture of a Service port and enter the Number of Service Instances for nsmf-pdusession. Select Specify Service Set ID to enable the capture of a Service Set ID and enter the Number of Service Instances for nsmf-pdusession. Service Set ID consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen. Currently up to 4 instances are supported. Reference : 29.503 Available when "Number of IPs per NF Instance" and/or "NF Set ID" is enabled on SMF SBI Node. Enter IP Index - Currently up to 4 instances are supported. Enter Service Port - Range : 1 to 65535 , default : 80 Enter Service Set ID which consists of up to 32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) and does not end with a hyphen.
NF Set can be selected only when "NF Set ID" is configured in SMF SBI Node under Network Devices. NF Service Set can be selected only when Specify Service Set ID is enabled in this same page. Tcl Parameter: NsmfPduSessSpecSvcPortEn Tcl Parameter: NsmfPduSessSpecSvcSetIdEn Tcl Parameter: NsmfPduSessNumSvclns Tcl Parameter: NsmfPduSessSvcIpIdx_1 Tcl Parameter: NsmfPduSessSvcPort_1 Tcl Parameter: NsmfPduSessSvcSetId_1 |
NF Service Failure |
Select NF Service Failure to Emulate NF Service Failure. Available for UDM (Nudm Tab) and AUSF (Nausf Tab) Select the Failure Type to emulate. Options : Connection Reset (default), Service Unavailable Enter the Delay for NF service instance failure emulation in seconds. When Failure Type is Service Unavailable, Delay (s) is greyed out Range : 10 to 65535, Default : 60 Enter the IP Index (Currently up to 4 instances are supported) of the service endpoint and the Service port of service endpoint. Range : 1 to 65535 , default : 1 Select Failed to Handle. Available when Failure Type is Service Unavailable. Options for AUSF : ausfUEAuthReq (default), ausf5gAkaConfirm , ausfAuthResultRemovalReq, ausfRgAuthReq Options for UDM : sdmSubscribeReq, uecmAmf3gppAccessRegisterReq , uecmAmfNon3gppAccessRegisterReq , uecmAmf3gppAccessDeregisterReq, uecmAmfNon3gppAccessDeregisterReq, uecmAmf3gppAccessUpdateReq, uecmAmfNon3gppAccessUpdateReq, sdmSubscribeModifyReq Options for NSMF : nsmf-pdusession Tcl Parameter: NausfEmuSvcFailEn Tcl Parameter: NausfEmuSvcFailType Tcl Parameter: NausfEmuSvcDailDelay Tcl Parameter: NausfEmuSvcFailIpIdx Tcl Parameter: NausfEmuSvcFailPort Tcl Parameter: NausfEmuSvcFailMsg Tcl Parameter: NudmEmuSvcFailEn Tcl Parameter: NudmEmuSvcFailType Tcl Parameter: NudmEmuSvcDailDelay Tcl Parameter: NudmEmuSvcFailIpIdx Tcl Parameter: NudmEmuSvcFailPort Tcl Parameter: NudmEmuSvcFailMsg Tcl Parameter: NsmfEmuSvcFailEn Tcl Parameter: NsmfEmuSvcFailType Tcl Parameter: NsmfEmuSvcDailDelay Tcl Parameter: NsmfEmuSvcFailIpIdx Tcl Parameter: NsmfEmuSvcFailPort Tcl Parameter: NsmfEmuSvcFailMsg |