AUSF SBI Node


AMF SBI Node is available when relevant options in the Service Based Nodal Test Configuration and Service Based Node Emulator Configuration are enabled.

 

Use Alternate SBI Client Address

Use Alternate SBI Server Address

Use Alternate SBI Server's Client Address

Server / Client / Alternate Server / Alternate Client

 

Host

MCC

MNC

NF Instance ID

Alternate Server

Host

NF Instance ID

 

Number of IPs per NF Instance

Host Prefix per IP Instance

 

NF Set ID

Emulate NF Failure

Failure Type

Delay (s)

NF Instance

Failed to Handle

Select Use Alternate SBI Client Address and enter the Client side interface details.

 

Select Use Alternate SBI Server Address and enter the Alternate Server side Starting IP Address. Enter the Alternate Host, and NF Instance ID. Use for reroute/redirect when 503 is received - SBI Error Handling.

Select Use Alternate SBI Server's Client Address and enter the Alternate Client side Starting IP Address. Enter the Alternate Host, and NF Instance ID. Use for reroute/redirect when 503 is received - SBI Error Handling.

Enter Server IPv4 or IPv6 address configuration, # of Nodes from 1 to 1000. Enter Host address. Default: AUSF.SPirent.com

Enter MCC (Mobile Country Code) - 3 characters. Default : 000

Enter MNC (Mobile Network Code) - between 2 to 3 characters. Default : 00

If NF Instance ID is selected, enter the NF Instance ID. You may change the default value however you must ensure it does not conflict with any other SBI node.

Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet

Number of IPs per NF Instance is used to support multiple IP instances for each AUSF SBI Node (NF Instance). Available only if "NRF Interface" is enabled. Range : 1 to 4, default : 1

When Number of IPs per NF Instance is enabled, enter Host Prefix per IP Instance, which is used to set the host name per IP Instance: <Host prefix> + <IP Index> + "." + <AUSF Host>. Enter up to 32 characters. Default : Instance.

NF Set ID is used to configure NF Set ID for emulated AUSF NF instances. Available only if "NRF Interface" is enabled. Range : NF Set ID consists of 1-32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) that shall not end with a hyphen. 

Emulate NF Failure - is used to emulate NF failure. When enabled, Delay (s) and NF Instance become available for input.

Select the Failure Type to emulate.

Options : Connection ResetService Unavailable

Enter Delay in seconds for NF failure emulation. When Failure Type is Service Unavailable, Delay (s) is greyed out. Range : 10 to 65535  Default : 60

Enter NF Instance for failure emulation. Range : 1 to [# of Nodes]  Default : 1

Select Failed to Handle. Available when Failure Type is Service Unavailable. Options: ausfUEAuthReq (default), ausf5gAkaConfirm , ausfAuthResultRemovalReq, ausfRgAuthReq 

 

Server Ethernet Configuration

Define:

Tcl Parameter: AusfSbiClnAddrEn

Tcl Parameter: AusfSbiAltSrvAddrEn

Tcl Parameter: AusfSbiAltClnAddrEn

Tcl Parameter: AusfSbiNodeSrvAddr

Tcl Parameter: AusfSbiNodeClnAddr

Tcl Parameter: AusfSbiNodeAltSrvAddr

Tcl Parameter: AusfSbiNodeAltClnAddr

Tcl Parameter: AusfSbiNodeSrvHost

Tcl Parameter: AusfSbiNodeAltSrvHost

Tcl Parameter: AusfMcc

Tcl Parameter: AusfMnc

Tcl Parameter: AusfSbiNodeNfInstanceIdEn

Tcl Parameter: AusfSbiNodeNfInstanceId

Tcl Parameter: AusfSbiNodeAltSrvNfInstanceIdEn

Tcl Parameter: AusfSbiNodeAltSrvNfInstanceId

Tcl Parameter: AusfSbiNodeNumIpsPerNfInstEn

Tcl Parameter: AusfSbiNodeNumIpsPerNfInst

Tcl Parameter: AusfSbiNodeHostPrefixPerIpInst

Tcl Parameter: AusfSbiNodeNfSetIdEn

Tcl Parameter: AusfSbiNodeNfSetId

Tcl Parameter: AusfSbiNodeEmuNfFailEn

Tcl Parameter: AusfSbiNodeEmuNfFailType

Tcl Parameter: AusfSbiNodeEmuNfFailDelay

Tcl Parameter: AusfSbiNodeEmuNfFailInst

Tcl Parameter: AusfSbiNodeEmuNfFailMsg

  • The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.

  • The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.