UDM SBI Node is available when relevant options in the Service Based Nodal Test Configuration and Service Based Node Emulator Configuration are enabled.
|
Use Alternate SBI Client Address
Use Alternate SBI Server Address Use Alternate SBI Server's Client Address Server / Client / Alternate Server / Alternate Client
Host MCC MNC NF Instance ID Alternate Server Host NF Instance ID
Number of IPs per NF Instance Host Prefix per IP Instance
NF Set ID Emulate NF Failure Failure Type Delay (s) NF Instance Failure to Handle |
Select Use Alternate SBI Client Address and enter the Client side interface details.
Enter Server IPv4 or IPv6 address configuration, # of Nodes from 1 to 1000. Enter Host address. Default: UDM.SPirent.com Select Use Alternate SBI Server Address and enter the Alternate Server side Starting IP Address. Enter the Alternate Host, and NF Instance ID. Use for reroute/redirect when 503 is received - SBI Error Handling. Select Use Alternate SBI Server's Client Address and enter the Alternate Client side Starting IP Address. Enter the Alternate Host, and NF Instance ID. Use for reroute/redirect when 503 is received - SBI Error Handling. Enter MCC (Mobile Country Code) - 3 characters. Default : 000 Enter MNC (Mobile Network Code) - between 2 to 3 characters. Default : 00 If NF Instance ID is selected, enter the NF Instance ID. You may change the default value however you must ensure it does not conflict with any other SBI node. Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet
Number of IPs per NF Instance is used to support multiple IP instances for each UDM SBI Node (NF Instance). Available only if "NRF Interface" is enabled. Range : 1 to 4, default : 1 When Number of IPs per NF Instance is enabled, enter Host Prefix per IP Instance, which is used to set the host name per IP Instance: <Host prefix> + <IP Index> + "." + <UDM Host>. Enter up to 32 characters. Default : Instance.
NF Set ID is used to configure NF Set ID for emulated UDM NF instances. Available only if "NRF Interface" is enabled. Range : NF Set ID consists of 1-32 alphabetic characters (A-Z and a-z), digits (0-9) and/or the hyphen (-) that shall not end with a hyphen. Emulate NF Failure - is used to emulate NF failure. When enabled, Delay (s) and NF Instance become available for input. Select the Failure Type to emulate. Options : Connection Reset, Service Unavailable Enter Delay in seconds for NF failure emulation. When Failure Type is Service Unavailable, Delay (s) is greyed out. Range : 10 to 65535 Default : 60 Enter NF Instance for failure emulation. Range : 1 to [# of Nodes] Default : 1 Select Failed to Handle. Available when Failure Type is Service Unavailable. Options: sdmSubscribeReq, uecmAmf3gppAccessRegisterReq , uecmAmfNon3gppAccessRegisterReq , uecmAmf3gppAccessDeregisterReq, uecmAmfNon3gppAccessDeregisterReq, uecmAmf3gppAccessUpdateReq, uecmAmfNon3gppAccessUpdateReq, sdmSubscribeModifyReq Server Ethernet ConfigurationDefine:
Tcl Parameter: UdmSbiClnAddrEn Tcl Parameter: UdmSbiAltSrvAddrEn Tcl Parameter: UdmSbiAltClnAddrEn Tcl Parameter: UdmSbiNodeSrvAddr Tcl Parameter: UdmSbiNodeAltSrvAddr Tcl Parameter: UdmSbiNodeClnAddr Tcl Parameter: UdmSbiNodeAltClnAddr Tcl Parameter: UdmSbiNodeSrvHost Tcl Parameter: UdmSbiNodeAltSrvHost Tcl Parameter: UdmMcc Tcl Parameter: UdmMnc Tcl Parameter: UdmSbiNodeNfInstanceIdEn Tcl Parameter: UdmSbiNodeNfInstanceId Tcl Parameter: UdmSbiNodeAltSrvNfInstanceIdEn Tcl Parameter: UdmSbiNodeAltSrvNfInstanceId Tcl Parameter: UdmSbiNodeNumIpsPerNfInstEn Tcl Parameter: UdmSbiNodeNumIpsPerNfInst Tcl Parameter: UdmSbiNodeHostPrefixPerIpInst Tcl Parameter: UdmSbiNodeNfSetIdEn Tcl Parameter: UdmSbiNodeNfSetId Tcl Parameter: UdmSbiNodeEmuNfFailEn Tcl Parameter: UdmSbiNodeEmuNfFailType Tcl Parameter: UdmSbiNodeEmuNfFailDelay Tcl Parameter: UdmSbiNodeEmuNfFailInst Tcl Parameter: UdmSbiNodeEmuNfFailMsg
|