The Amf to Lmf NF (Network Function) Consumer tab is available when Test LMF (Nlmf), From AMF (NLs) is selected on Service Based Nodal test case and when NLs Interface is selected on AMF Node test case. About the 5G Application.
Per 3GPP TS 23.501, 23.502 and 29.5xx.
Measurements collected for Service Based Node related processing are reported on the AMF-LMF Consumer report tab.
NF Consumer
|
NF Consumer |
Supported GAD Shapes |
PEI
User Location
|
Available when Test LMF (Nlmf), From AMF (NLs) is selected on Service Based Nodal test case on Interface AMF-LMF.
Available when LMF (Nlmf) is selected on Service Based Node test case on Interface Nlmf and when Test LMF (Nlmf) is selected on Service Based Nodal test case on interface AMF-LMF. Available when NLs Interface is selected on AMF Node test case on Interface AMF-LMF. Options: 15.2.0/Dec2018 (default for Service Based test case) , 15.4.0/Jun2019 (default for AMF Node test case) Tcl Parameter: NlsNlmfSbiVersion Tcl Parameter: NlmfSbiVersion |
|||||||||||||||
Select “Use Access Token” option to support OAuth2 authorization for NF Consumer. Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF per spec TS 29.510 V16.3.0 section 5.4.2.2.1. Select to enter Access Token. Enter up to 1023 characters Tcl Parameter: NlsNlmfUseAccTokEn Tcl Parameter: NlsNlmfAccTokEn Tcl Parameter: NlsNlmfAccTok |
|||||||||||||||
Available when NLs Interface is selected on AMF Node test case on Interface AMF-LMF. Enter the N1 Notify Callback URI. Up to 256 characters. Default: /ntf-service/v1/namf-notify/lpp-message/comm-n1msgnotify Tcl Parameter: NlsNlmfN1NtfCbUri |
|||||||||||||||
Available when NLs Interface is selected on AMF Node test case on Interface AMF-LMF. Enter the N1 Notify Callback URI. Up to 256 characters. Default: /ntf-service/v1/namf-notify/nrppa-message/comm-n2msgnotify Tcl Parameter: NlsNlmfN2NtfCbUri |
|||||||||||||||
Available when NLs Interface is selected on AMF Node test case on Interface AMF-LMF. Enter the N1 Notify Callback URI. Up to 256 characters. Default: /ntf-service/v1/namf-notify/nrppa-message/comm-non-ue-n2-messages Tcl Parameter: NlsNlmfNonUeN2NtfCbUri |
|||||||||||||||
Available when NLs Interface is selected on AMF Node test case on Interface AMF-LMF and when Test LMF (Nlmf), From AMF (NLs) is selected on Service Based Nodal test case on Interface AMF-LMF. Select to to customize CID in LmfDeterminLocReq. For any give UE it should have the same correlation ID for all messages. For example if we have 5 messages in the flow and for 2 UE test we need, UE1 will have Co-ID as 1111111-11111111-1111-1111-1111-111111111111 for all messages in the message flow and UE2 will have Co-id as 1111111-11111111-1111-1111-1111-111111111112 for all messages in the message flow. This is accomplished with the standard Incremented Integer Auto-Increment type along with a field that supports String base string, where a new value is generated for each UE: Examples: Given 2 UEs in the test: 1111111-11111111-1111-1111-1111-111111111111 Given 5 UEs in the test: 1111111-11111111-1111-1111-1111-111111111111 Padding #(N1:5) => 00001, 00002, 01000 always uses 5 digits No Padding #(N1) => 1,2……01000,01001, …. 10000 once you reach 10 it’s two digits, 100 is 3 digits Use non-zero multi digit value #(N10000) => 10001, 10002 Spec is 29.572 6.1.6.2.2. Because Correlation ID replaces SUPI in AMF-LMF message, Correlation ID maps to UE. The only supported Wizard will be "Incremented Integers" with just Increment and Padding, no Repeats nor Hexidecimal format. Default : 1111111-11111111-1111-1111-1111-111111111#(N111)
Tcl Parameter: NlsNlmfCidEn Tcl Parameter: NlsNlmfCid |
|||||||||||||||
Select the external client type. Options: EMERGENCY_SERVICES, VALUE_ADDED_SERVICES, PLMN_OPERATOR_SERVICES, LAWFUL_INTERCEPT_SERVICES, PLMN_OPERATOR_BROADCAST_SERVICES, PLMN_OPERATOR_OM, PLMN_OPERATOR_ANONYMOUS_STATISTICS, PLMN_OPERATOR_TARGET_MS_SERVICE_SUPPORT Tcl Parameter: NlsNlmfEternalClientType |
|||||||||||||||
Support Request Position Info from On-Demand Command |
Available on AMF-LMF Interface on AMF node test case when Command Mode is enabled. The ODC on AMF Node's AMF-LMF tab is named "ControlLcs" - Command Mode AMF Node . It will be available in the running state when in Command Mode and "Support Request Position Info from On-Demand Command" is checked. Tcl Parameter: LcsOdcReqPosInfoEn |
||||||||||||||
Select the LCS Client Type. Available on AMF Node Test case when Support Request Position Info from On-Demand Command is enabled. Options : EMERGENCY SERVICES, VALUE ADDED SERVICES, PLMN OPERATOR SERVICES, LAWFUL INTERCEPT SERVICES, PLMN OPERATOR BROADCAST SERVICES, PLMN OPERATOR OM, PLMN OPERATOR ANONYMOUS STATISTICS, PLMN OPERATOR TARGET MS SERVICE SUPPORT Tcl Parameter: LcsOdcLcsCliType |
|||||||||||||||
Select the LCS Location. Available on AMF Node Test case when Support Request Position Info from On-Demand Command is enabled. Options : CURRENT LOCATION, CURREBT OR_LAST KNOWN LOCATION, INITIAL LOCATION Tcl Parameter: LcsOdcLcsLoc |
|||||||||||||||
Select the Priority. Available on AMF Node Test case when Support Request Position Info from On-Demand Command is enabled. Options : HIGHEST_PRIORITY, NORMAL_PRIORITY Tcl Parameter: LcsOdcPriorityEn Tcl Parameter: LcsOdcPriority |
|||||||||||||||
Select to enter the Velocity Requested. Available on AMF Node Test case when Support Request Position Info from On-Demand Command is enabled. Options : VELOCITY_IS_NOT_REQUESTED (Default), VELOCITY_IS_REQUESTED, Tcl Parameter: LcsOdcVelReqEn Tcl Parameter: LcsOdcVelReq |
|||||||||||||||
Select the LCS Supported GAD Shapes for input pane to allow selection of the following supported shapes. Available on AMF Node Test case when Support Request Position Info from On-Demand Command is enabled. Options : POINT, POINT UNCERTAINTY CIRCLE, POINT UNCERTAINTY ELLIPSE, POLYGON, POINT ALTITUDE, POINT ALTITUDE UNCERTAINTY, ELLIPSOID ARC Tcl Parameter: LcsOdcLcsSupGadDShapesEn Tcl Parameter: LcsOdcLcsSupGadShapes |
|||||||||||||||
Select Location QoS and the Location details. Also available on AMF Node Test case when Support Request Position Info from On-Demand Command is enabled.
|
|||||||||||||||
Select the Priority. Options : HIGHEST_PRIORITY, NORMAL_PRIORITY Tcl Parameter: NlsNlmfPriorityEn Tcl Parameter: NlsNlmfPriority |
|||||||||||||||
Select to enter the Velocity Requested. Options : VELOCITY_IS_NOT_REQUESTED (Default), VELOCITY_IS_REQUESTED, Tcl Parameter: NlsNlmfVelocityRequestedEn Tcl Parameter: NlsNlmfVelocityRequested |
|||||||||||||||
Select the Ue Lcs Cap. Tcl Parameter: NlsNlmfUeLcsCapEn |
|||||||||||||||
Select to include the SUPI (Subscription Permanent Identifier). Tcl Parameter: NlsNlmfIncludeSupiEn |
|||||||||||||||
Select to include the GPSI (Generic Public Subscription Identifier). Tcl Parameter: NlsNlmfIncludeGpsiEn |
|||||||||||||||
Select Supported GAD Shapes for input pane to allow selection of the following supported shapes: Tcl Parameter: NlsNlmfSupGADShapesEn
|
Select PEI to Enter the Starting IMEI and Software Version.
|
|||||||||
Select the RAT (Radio Access Technology) Type and enter the User Location.
|