Af to Nef NF Tab

The Af to Nef NF Tab contains the parameters that define the N33 interface which provides a reference point between Network Exposure function (NEF) and an Application Function (AF).

Available in Service Based Nodal when Test NEF (Nnef), From AF (N33) is enabled.

Reference 3GPP 29.122 v15.3.0, 23.501, 23.502

General Parameters

NnefNb Version (29.122)
API Prefix
SCS/AS ID
Use Access Token
- Access Token

Supported Feature

# of PDU Session (1 to 11)

Address
Sponsor ID
DNN

# of PDU Session (1 to 11)

ASP ID
SST
SD

Original / Update

Include Usage Threshold
Duration (s)
Total Volume (byte)
Downlink Volume (byte)
Uplink Volume (byte)

# of Flow Info (1 to 6)
UL Flow Description
DL Flow Description

Original / Update

Reference ID
Sponsoring Enabled

# of ETH Flow Info (1 to 6)
Destination MAC Address
ETH Type
Flow Description
Flow Direction
Source MAC Address
Customer-VLAN Tag
Service-VLAN Tag

PFD Management Transactions
- Supported Features
- Number of PFD Management Datas
  - Number of PFD Data External Application
    - External Application ID
    - Allowed Delay (ms)
    - PFD Data External Application (Original / Update)
      - # of PFD Content
      - Content
      - PFD ID
      - URLs
        
        URL
      - Flow Descriptions
        
        Flow Descriptions
      - Domain Names
        
        Domain Name
      - Domain Name Protocol

Single UE
Number of UEs
Use External ID
Supported Features
Subscription Rate (Subscription/s)
Group UE

Subscribe Events Settings Panel / Update Events Settings Panel (Single UE)

Subscribe Events Settings Panel / Update Events Settings Panel (Single UE)

Subscribe Events Settings Panel / Update Events Settings Panel (Group UE)

Subscribe Events Settings Panel / Update Events Settings Panel (Group UE)

NIDD Configuration

Enable NIDD Configuration
- Number of NIDD Configurations

NIDD Configuration

Original Settings / Update Settings
- Duration (s)
- PDN Establishment Option

Device Triggering

Number of Device Triggers
- Device Trigger

Communication Pattern Parameters Provisioning

Communication Pattern Parameters Provisioning
- Number of Communication Pattern Info

Network Configuration Parameters Provisioning

Network Configuration Parameters Provisioning
- Number of Network Configuration
  - Network Configuration

5G LAN Parameters Provisioning

5G LAN Parameters Provisioning

ACS Parameters Provisioning

ACS Parameters Provisioning
- Number of ACS Parameters Provisioning
  - ACS Parameters Provisioning

LPI Parameters Provisioning

LPI Parameters Provisioning
- Number of LPI Parameters Provisioning
  - LPI Parameters Provisioning

NnefNb Version (29.122)

Available when Test NEF (Nnef), From AF (N33) on Service Based Nodal test case on Interface AF-NEF.

Options: 15.4.0/Jun2019 (default), 16.6.0/Jun2020, 16.7.0/Sept2020

Tcl Parameter: N33NnefSbiVersion

API Prefix

Select to enter the API Prefix for nnef.

Select the Auto-Increment Format Wizard to Auto increment the API Prefix.

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: N33NnefApiPrefixEn

Tcl Parameter: N33NnefApiPrefix

SCS/AS ID

Select to configure the SCS/AS ID in the URI.

Default : “spirent-af-#(N1)”

Select the Auto-Increment Format Wizard to Auto increment the API Prefix.

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: N33NnefScsAsIdEn

Tcl Parameter: N33NnefScsAsID

Use Access Token

Select “Use Access Token” option to support OAuth2 authorization for NF Consumer.

Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF per spec TS 29.510 V16.3.0 section 5.4.2.2.1.

Select to enter Access Token. Enter up to 1023 characters.

Tcl Parameter: N33NnefUseAccTokEn

Tcl Parameter: N33NnefAccTokEn

Tcl Parameter: N33NnefAccTok

Supported Feature

Select to enter the supported features.

Tcl Parameter: N33NnefSupportFeatureEn

Tcl Parameter: N33NnefSupportFeature

# of PDU Sessions

Select # of PDU sessions to configure.

Range : 1 to 11

Default : 1

Tcl Parameter: N33NnefPduSessionNum

Address

Select the address type for the PDU Session.

Options : IPv4, IPv6, MAC

Enter the address. Follow the format based on your address type selection. For IPv6 Address, it must follow the format "IP/Prefix length"

Tcl Parameter: N33NnefAddrType_1

Tcl Parameter: N33NnefAddrVal_1

Sponsor ID

Enter the Sponsor ID.

Range : 1 to 255 characters

Tcl Parameter: N33NnefSponsorId_1

DNN

Enter the DNN (Data Network Name).

Range : up to 63 characters

Defaut : ims

Tcl Parameter: N33NnefDnn_1

ASP ID

Enter the ASP ID.

Range : 1 to 255 characters

Tcl Parameter: N33NnefAspId_1

SST

Enter the SST (Slice / Service Type) and select to enter the SD (Slice Differentiator).

SST : 0 up to 255

SD : hex-string, 6 digit hex without 0x

Tcl Parameter: N33NnefSst_1

Tcl Parameter: N33NnefSdEn_1

Tcl Parameter: N33NnefSd_1

Include Usage Threshold

Original / Update

Select to include Usage Threshold.

Select Original (0) / Update panes (1).

Select at least one usage threshold.

Tcl Parameter: N33NnefIncUsageThreshold_1_0

Tcl Parameter: N33NnefIncUsageThreshold_1_1

Duration (s)	Select to enter the Duration for Usage Threshold in seconds. Range : 0 to 9223372036854775807 Default : 60 Tcl Parameter: N33NnefDurationEn_1_0 Tcl Parameter: N33NnefDurationEn_1_1 Tcl Parameter: N33NnefDuration_1_0 Tcl Parameter: N33NnefDuration_1_1
Total Volume (byte)	Select to enter the total volume for Usage Threshold in bytes. Range : 0 to 9223372036854775807 Default : 0 Tcl Parameter: N33NnefTotalVolumeEn_1_0 Tcl Parameter: N33NnefTotalVolumeEn_1_1 Tcl Parameter: N33NnefTotalVolume_1_0 Tcl Parameter: N33NnefTotalVolume_1_1
Downlink Volume (byte)	Select to enter the downlink volume for Usage Threshold in bytes. Range : 0 to 9223372036854775807 Default : 0 Tcl Parameter: N33NnefDlVolumeEn_1_0 Tcl Parameter: N33NnefDlVolumeEn_1_1 Tcl Parameter: N33NnefDlVolume_1_0 Tcl Parameter: N33NnefDlolume_1_1
Uplink Volume (byte)	Select to enter the uplink volume for Usage Threshold in bytes. Range : 0 to 9223372036854775807 Default : 0 Tcl Parameter: N33NnefUlVolumeEn_1_0 Tcl Parameter: N33NnefUlVolumeEn_1_1 Tcl Parameter: N33NnefUlVolume_1_0 Tcl Parameter: N33NnefUlolume_1_1

Select to enter the Reference ID.

Select the Auto-Increment Format Wizard to Auto increment the Reference ID.

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: N33NnefReferenceIdEn_1_0

Tcl Parameter: N33NnefReferenceIdEn_1_1

Tcl Parameter: N33NnefReferenceId_1_0

Tcl Parameter: N33NnefReferenceId_1_1

Select to enable Sponsoring Enabled.

Options : true, false

Tcl Parameter: N33NnefSponsoringEnabledEn_1_0

Tcl Parameter: N33NnefSponsoringEnabledEn_1_1

Tcl Parameter: N33NnefSponsoringEnabled_1_0

Tcl Parameter: N33NnefSponsoringEnabled_1_1

# of Flow Info

Enter up to 6 Flow Infos for UL and DL Flow descriptions.

Available when Address = IPv4 or IPv6.

Tcl Parameter: N33NnefFlowInfoNum_1_0

Tcl Parameter: N33NnefFlowInfoNum_1_1

UL Flow Description

Select to enter UL (Uplink) Flow Description.

Range : 1 to 1023 characters

Tcl Parameter: N33NnefUlFlowDescriptionEn_1_0

Tcl Parameter: N33NnefUlFlowDescriptionEn_1_1

Tcl Parameter: N33NnefUlFlowDescription_1_0

Tcl Parameter: N33NnefUlFlowDescription_1_1

DL Flow Description

Select to enter DL (Downlink)Flow Description.

Range : 1 to 1023 characters

Tcl Parameter: N33NnefDlFlowDescriptionEn_1_0

Tcl Parameter: N33NnefDlFlowDescriptionEn_1_1

Tcl Parameter: N33NnefDlFlowDescription_1_0

Tcl Parameter: N33NnefDlFlowDescription_1_1

# of ETH Flow Info

Enter up to 6 ETH Flow Infos descriptions.

Available when Address = MAC.

Tcl Parameter: N33NnefEthFlowInfoNum_1_0

Tcl Parameter: N33NnefEthFlowInfoNum_1_1

Destination MAC Address	Select to enter the destination MAC address. Enter a valid MAC address. Tcl Parameter: N33NnefDestMacAddrEn_1_1_0 Tcl Parameter: N33NnefDestMacAddrEn_1_1_1 Tcl Parameter: N33NnefDestMacAddr_1_1_0 Tcl Parameter: N33NnefDestMacAddr_1_1_1
Source MAC Address	Select to enter the source MAC address. Enter a valid MAC address. Tcl Parameter: N33NnefSrcMacAddrEn_1_1_0 Tcl Parameter: N33NnefSrcMacAddrEn_1_1_1 Tcl Parameter: N33NnefSrcMacAddr_1_1_0 Tcl Parameter: N33NnefSrcMacAddr_1_1_1
ETH Type	Enter the ETH Type. Enter two octets. Default : 806 Tcl Parameter: N33NnefEthType_1_1_0 Tcl Parameter: N33NnefEthType_1_1_1
Flow Description	Enter the flow description. Range : 0 to 255 characters Tcl Parameter: N33NnefEthFlowDescription_1_1_0 Tcl Parameter: N33NnefEthFlowDescription_1_1_1
Flow Direction	Select the flow direction. Options : UPLINK, DOWNLINK Tcl Parameter: N33NnefEthFlowDirectionEn_1_1_0 Tcl Parameter: N33NnefEthFlowDirectionEn_1_1_1 Tcl Parameter: N33NnefEthFlowDirection_1_1_0 Tcl Parameter: N33NnefEthFlowDirection_1_1_1
Customer-VLAN Tag	Select to enter the customer-VLAN Tag. Enter two octets. Tcl Parameter: N33NnefEthCustomerVlanTagEn_1_1_0 Tcl Parameter: N33NnefEthCustomerVlanTagEn_1_1_1 Tcl Parameter: N33NnefEthCustomerVlanTag_1_1_0 Tcl Parameter: N33NnefEthCustomerVlanTag_1_1_1
Service-VLAN Tag	Select to enter the service-VLAN Tag. Enter two octets. Tcl Parameter: N33NnefEthServiceVlanTagEn_1_1_0 Tcl Parameter: N33NnefEthServiceVlanTagEn_1_1_1 Tcl Parameter: N33NnefEthServiceVlanTag_1_1_0 Tcl Parameter: N33NnefEthServiceVlanTag_1_1_1

PFD Management Transactions

Spec Reference : 29.122 Version 16.6.0/Jun2020.

Supported Features

Select to enter supported Features for PFD Management datas. Used to negotiate the applicability of the optional features in table 5.11.4-1 in Spec Reference : 29.122 Version 16.6.0/Jun2020.

Range : 1 to 8 HEX chars

Default : 1f

Tcl Parameter: N33NnefSupFeatEn

Tcl Parameter: N33NnefSupFeat

PFD Management Transactions

The PfdManagement API defines a set of data models, resources and the related procedures for the creation and management of the PFD management request.

Select to enable up to 3 Packet Flow Description (PFD) Management datas.

Available when Version > = 16.6.0/Jun2020.

Tcl Parameter: N33NnefPfdMgnDatasNum

Number of PFD Data External Application

Select the number of PFD (Packet Flow Description) Data External Application for Configuration for Original and Update.

Each element uniquely identifies the PFDs for an
external application identifier. Each element is
identified in the map via an external application
identifier as key.

Range : 1 to 3

Tcl Parameter: N33NnefPfdExtAppNum_1_0

Tcl Parameter: N33NnefPfdExtAppNum_1_1

External Application ID

Enter the External Application ID for PFD Data External Application Configuration for Original and Update.

Each element uniquely external application identifier. Note: An externalAppId can only belong to one "individual PFD Management Transaction" resource.

Spec Reference : 29.122 Version 16.6.0/Jun2020.

See 3GPP TS 29.571 [7] for formatting of ApplicationID.

Range : up to 128 characters

Default : app id 1

Tcl Parameter: N33NnefPfdExtAppId_1_0_1

Tcl Parameter: N33NnefPfdExtAppId_1_1_1

Allowed Delay (ms)

Select to enter the PFD Allowed Delay Time in milliseconds for Original and Update.

Indicates that the list of PFDs in this request should be deployed within the time interval indicated by the Allowed Delay.

Range : 0 to 4294967295

Default : 0

Tcl Parameter: N33NnefPfdAlwDlyEn_1_0_1

Tcl Parameter: N33NnefPfdAlwDly_1_0_1

Tcl Parameter: N33NnefPfdAlwDlyEn_1_1_1

Tcl Parameter: N33NnefPfdAlwDly_1_1_1

PFD Content

PFD ID

Select to enter the number of PFD Content for Original and Update.

Options : 1, 2

Enter PFD ID. Up to 128 characters.

Tcl Parameter: N33NnefPfdConNum_1_0_1_0

Tcl Parameter: N33NnefPfdDataPfdConPfdId_1_0_1_0_1

Tcl Parameter: N33NnefPfdConNum_1_0_1_1

Tcl Parameter: N33NnefPfdDataPfdConPfdId_1_0_1_1_1

URLs

Select to enter the number of PFD URLs for Original and Update.

Options : 1, 2

Enter up to 128 characters.

Default : http://www.3gpp.org/ftp/Specs

Enter URL.

Tcl Parameter: N33NnefPfdDataPfdConUrlEn_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConUrlNum_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConUrl_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConUrlEn_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConUrlNum_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConUrl_1_0_1_1_1

Flow Descriptions

Select to enter the number of PFD Flow Descriptions for Original and Update.

Options : 1, 2

Enter FLow Description.

Tcl Parameter: N33NnefPfdDataPfdConFlowDescEn_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConFlowDescNum_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConFlowDesc_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConFlowDescEn_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConFlowDescNum_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConFlowDesc_1_0_1_1_1

Domain Names

Select to enter the number of Domain Names for Original and Update.

Options : 1, 2

Enter Domain Name.

Tcl Parameter: N33NnefPfdDataPfdConDomainNameEn_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConDomainNameNum_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConDomainName_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConDomainNameEn_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConDomainNameNum_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConDomainName_1_0_1_1_1

Domain Name Protocol

Select the Domain Name Protocol for Original and Update.

Options :

DNS_QNAME

TLS_SNI

TLS_SAN

TLS_SCN

Tcl Parameter: N33NnefPfdDataPfdConProtocolEn_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConProtocol_1_0_1_0_1

Tcl Parameter: N33NnefPfdDataPfdConProtocolEn_1_0_1_1_1

Tcl Parameter: N33NnefPfdDataPfdConProtocol_1_0_1_1_1

Single UE

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_EventExposure service as per 23.502 section 5.2.6.2.

Single UE	Select Single UE to enable Number of UEs, Subscription Rate (Subscription/s) and the Subscribe Panel. Enter the Event Mode, Subscription Update and Unsubscription Update details. Tcl Parameter: N33NnefSingleUEEn
Number of UEs	Enter the Number of UEs. Range : 1 to "Number of Subscribers" in "Test Configuration" tab. Default = 1 Tcl Parameter: N33NnefSingleUeNum
Subscription Rate (subscription/s)	Enter the Subscription Rate per seconds. Range : 1 to 3000, default = 1 Tcl Parameter: N33NnefSingleUeSubsRate
Use External ID	Select to include external ID. Identifies a user as defined in Clause 4.6.2 of 3GPP TS 23.682 [2]. Tcl Parameter: N33NnefSingleUeExternalIdEn
Supported Features	Select to included Supported Features. Used to negotiate the supported optional features of the API. Range : 1 to 8 characters Tcl Parameter: N33NnefSingleUeSuppFeatEn Tcl Parameter: N33NnefSingleUeSuppFeat
Subscribe Events Settings	Click Subscribe Events Settings for Pop-up of Subscribe Events Settings Panel to capture Subscribe Events Settings.
Event Mode	Select to enable Event Mode details for Single UE. Select to include the Event Mode. Select to enter the Max Reports. Range : 0 to 999999, default = 1 Select to enter the Report Period. Range : 1 to 999999, default = 0 Select to include the Expiry Time. Format per RFC 3339. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time. The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red. Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select to enter the Relative Expiry Time in seconds. Relative time starts when the subscription is created or when an update is sent / received. Range: 10 to 999999 Default : 10 Tcl Parameter: N33NnefSingleUeEventModeEn Tcl Parameter: N33NnefSingleUeMaxReportsEn Tcl Parameter: N33NnefSingleUeMaxReports Tcl Parameter: N33NnefSingleUeRepPeriodEn Tcl Parameter: N33NnefSingleUeRepPeriod Tcl Parameter: N33NnefSingleUeExpiryEn Tcl Parameter: N33NnefSingleUeExpiry Tcl Parameter: N33NnefSingleUeExpiryTime Tcl Parameter: N33NnefSingleUeRelativeExpiryTime
Subscription Update	Enter the Update Delay Time in milliseconds for Single UE. Range : 1 to 2147483647, default = 1 Select to enter the Updated Expiry Time. Format per RFC 3339. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time. The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red. Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select to enter the Relative Expiry Time in seconds. Range: 10 to 999999 Default : 10 Click Updated Events Settings for Pop-up of Subscribe Events Settings Panel to capture Updated Events Settings. Tcl Parameter: N33NnefSingleUeUpdateDelayTime Tcl Parameter: N33NnefSingleUeUpdatedExpiryTimeEn Tcl Parameter: N33NnefSingleUeUpdatedExpiry Tcl Parameter: N33NnefSingleUeUpdatedExpiryTime Tcl Parameter: N33NnefSingleUeUpdatedRelativeExpiryTime
Unsubscription Update	Enter the Unsubscription Expiry Time in milliseconds for Single UE. Range : 1 to 2147483647, default = 1 Tcl Parameter: N33NnefSingleUeUnsubscribeDelayTime

Group UE

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_EventExposure service as per 23.502 section 5.2.6.2.

Group UE	Select Group UE to enable the Subscribe Panel. Enter the Group Id, Event Mode, Subscription Update and Unsubscription Update details. Tcl Parameter: N33NnefGroupUEEn
Subscribe Events Settings	Click Subscribe Events Settings for Pop-up of Subscribe Events Settings Panel to capture Subscribe Events Settings.
Group ID	Enter the Group ID. Group identity should use the following format : [^@]+@[^@]+ Up to 64 characters. Default : extgroupid-1111@1111 Tcl Parameter: N33NnefGroupGroupId
Supported Features	Select to included Supported Features. Range : 1 to 8 characters Tcl Parameter: N33NnefGroupUeSuppFeatEn Tcl Parameter: N33NnefGroupUeSuppFeat
Event Mode	Select to enable Event Mode details for Group UE. Select to include the Event Mode. select to enter the Maximum Reports. Range : 1 to 999999, default = 1 Select to enter the Report Period. Range : 1 to 999999, default = 0 Select to include the Expiry Time. Format per RFC 3339. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time. The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red. Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select to enter the Relative Expiry Time in seconds. Range: 10 to 999999 Default : 10 Tcl Parameter: N33NnefGroupUeEventModeEn Tcl Parameter: N33NnefGroupUeMaxReportsEn Tcl Parameter: N33NnefGroupUeMaxReports Tcl Parameter: N33NamfGroupUeRepPeriodEn Tcl Parameter: N33NamfGroupUeRepPeriod Tcl Parameter: N33NnefGroupUeExpiryEn Tcl Parameter: N33NnefGroupUeExpiry Tcl Parameter: N33NnefGroupUeExpiryTime Tcl Parameter: N33NnefGroupUeRelativeExpiryTime
Subscription Update	Enter the Update Delay Time in milliseconds for Group UE. Range : 1 to 2147483647, default = 1 Enter the Updated Expiry Time. Format per RFC 3339. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time. The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red. Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select to enter the Relative Expiry Time in seconds. Range: 10 to 999999 Default : 10 Click Updated Events Settings for Pop-up of Subscribe Events Settings Panel to capture Updated Events Settings. Tcl Parameter: N33NnefGroupUeUpdateDelayTime Tcl Parameter: N33NnefGroupUeUpdatedExpiryTime Tcl Parameter: N33NnefGroupUeUpdatedExpiry Tcl Parameter: N33NnefGroupUeUpdatedRelativeExpiryTime
Unsubscription Update	Enter the Unsubscription Expiry Time in milliseconds for Group UE. Range : 1 to 2147483647, default = 1 Tcl Parameter: N33NnefGroupUeUnsubscribeDelayTime

Subscriber / Updated Events Settings - Single UE

NF Consumer AF-NEF (Additional data fields for NEF (Nnef) - To AF (N33)) - Subscribe Events / Updated Events Settings (Pop-up Panel) - Single UE

Subscribe Events Settings (AF-NEF)

Single UE

Available on the AF-NEF Tab when Subscribe Events Settings or Updated Events Settings are selected for Single UE. Available when Nnef Version >= 16.7.0/Sept2020.

Describes the events to be subscribed for this subscription.

Loss of Connectivity, Communication Failure, Roaming Status, PDN Connectivity Status, UE Reachability, Chnge of IMSI IMEI Association

For Availability After DNN Failure, select Idle Status Indication, # of DDD Traffic Descriptors (IPV4 Addr, IPV6 Addr, MAC Addr, PORT)

For Location Reporting, select : IPv4 Address, IPv4 Address, Location Type

For API Support, select API Names, Name

For Downlink Data Delivery Status 5G, select # of DDD Traffic Descriptors (IPV4 Addr, IPV6 Addr, MAC Addr, PORT)

Select Downlink Data Delivery Status - Buffered, Discarded, Transmitted

Loss Of Connectivity	Select to indicate "monitoringType" is "LOSS_OF_CONNECTIVITY". Select to enter the Maximum Detection Time (s). This parameter may be included to identify the maximum period of time after which the UE is considered to be unreachable. Range : 1 to 2147483647 Default : 1 Tcl Parameter: N33NnefSingleSubLossOfConnEn Tcl Parameter: N33NnefSingleSubLossOfConnMaxDectTimeEn Tcl Parameter: N33NnefSingleSubLossOfConnMaxDectTime Tcl Parameter: N33NnefSingleSubUpdatedLossOfConnEn Tcl Parameter: N33NnefSingleSubUpdatedLossOfConnMaxDectTimeEn Tcl Parameter: N33NnefSingleSubUpdatedLossOfConnMaxDectTime
Communication Failure	Select to indicate "monitoringType" is "COMMUNICATION_FAILURE". Select to identify a IPv4 Address / IPv6 Address. Enter a valid IPv4 Address and/or IPv6 Address. Tcl Parameter: N33NnefSingleSubCommunicationFailureEn Tcl Parameter: N33NnefSingleSubCommFailureIpv4AddrEn Tcl Parameter: N33NnefSingleSubCommFailureIpv4Addr Tcl Parameter: N33NnefSingleSubCommFailureIpv6AddrEn Tcl Parameter: N33NnefSingleSubCommFailureIpv6Addr Tcl Parameter: N33NnefSingleSubUpdatedCommunicationFailureEn Tcl Parameter: N33NnefSingleSubUpdatedCommFailureIpv4AddrEn Tcl Parameter: N33NnefSingleSubUpdatedCommFailureIpv4Addr Tcl Parameter: N33NnefSingleSubUpdatedCommFailureIpv6AddrEn Tcl Parameter: N33NnefSingleSubUpdatedCommFailureIpv6Addr
Roaming Status	Select to indicate "monitoringType" is "ROAMING_STATUS". Select PLMN Indication. Option : false or true. This parameter may be included to indicate the notification of UE's Serving PLMN ID. Tcl Parameter: N33NnefSingleSubRoamingStatusEn Tcl Parameter: N33NnefSingleSubRoamingStatusPlmnIndicationEn Tcl Parameter: N33NnefSingleSubUpdatedRoamingStatusEn Tcl Parameter: N33NnefSingleSubUpdatedRoamingStatusPlmnIndicationEn
PDN Connectivity Status	Select to indicate "monitoringType" is "PDN_CONNECTIVITY_STATUS". This parameter is included to indicate the PDN connection details. Tcl Parameter: N33NnefSingleSubPDNConnStatusEn Tcl Parameter: N33NnefSingleSubUpdatedPDNConnStatusEn
UE Reachability	Select to indicate "monitoringType" is "UE_REACHABILITY". Select to indicate the Reachability Type. This parameter is included to identify the reachability of the UE. Options : SMS (default), Data. Select to indicate the Max Response Time (s). This parameter is included to identify the length of time for which the UE stays reachable to allow the SCS/AS to reliably deliver the required downlink data. Range : 1 to 2147483647 , Default : 500 (seconds) Select to indicate the Maximum Latency (s). This parameter is included to identify the maximum delay acceptable for downlink data transfers. Range : 1 to 2147483647 , Default : 500 (seconds) Select to indicate the Idle Status Indication. Option : false or true. This parameter is included to indicate the notification of when a UE, for which PSM is enabled, transitions into idle mode. Select to indicate enabling of notification, do not select to indicate no need to notify. Tcl Parameter: N33NnefSingleSubUeReachEn Tcl Parameter: N33NnefSingleSubUeReachTypeEn Tcl Parameter: N33NnefSingleSubUeReachType Tcl Parameter: N33NnefSingleSubUeReachMaxRspTimeEn Tcl Parameter: N33NnefSingleSubUeReachMaxRspTime Tcl Parameter: N33NnefSingleSubUeReachMaxLatencyEn Tcl Parameter: N33NnefSingleSubUeReachMaxLatency Tcl Parameter: N33NnefSingleSubUeReachIdleStatusIndicationEn Tcl Parameter: N33NnefSingleSubUpdatedUeReachEn Tcl Parameter: N33NnefSingleSubUpdatedUeReachTypeEn Tcl Parameter: N33NnefSingleSubUpdatedUeReachType Tcl Parameter: N33NnefSingleSubUpdatedUeReachMaxRspTimeEn Tcl Parameter: N33NnefSingleSubUpdatedUeReachMaxRspTime Tcl Parameter: N33NnefSingleSubUpdatedUeReachMaxLatencyEn Tcl Parameter: N33NnefSingleSubUpdatedUeReachMaxLatency Tcl Parameter: N33NnefSingleSubUpdatedUeReachIdleStatusIndicationEn
Change of IMSI IMEI Association	Select to indicate "monitoringType" is "CHANGE_OF_IMSI_IMEI_ASSOC IATION". Select to indicate the Association Type. This parameter is included to indicate whether the change of IMSI-IMEI or IMSI-IMEISV association shall be detected. Options : IMEI, (default), IMEISV Tcl Parameter: N33NnefSingleSubChgIMSIIMEIAssoEn Tcl Parameter: N33NnefSingleSubChgIMSIIMEIAssoTypeEn Tcl Parameter: N33NnefSingleSubChgIMSIIMEIAssoType Tcl Parameter: N33NnefSingleSubUpdatedChgIMSIIMEIAssoEn Tcl Parameter: N33NnefSingleSubUpdatedChgIMSIIMEIAssoTypeEn Tcl Parameter: N33NnefSingleSubUpdatedChgIMSIIMEIAssoType
Availability After DDN Failure	Select to indicate "monitoringType" is "AVAILABILITY_AFTER_DDN_FAILURE" Select to indicate the Idle Status Indication. Option : false or true. This parameter is included to indicate the notification of when a UE, for which PSM is enabled, transitions into idle mode. Select to indicate enabling of notification, do not select to indicate no need to notify. # of DDD Traffic Descriptors (Select 0, 1, 2): IPV4 Addr, IPV6 Addr, MAC Addr, PORT Tcl Parameter: N33NnefSingleSubAvailAfterDdnFailureEn Tcl Parameter: N33NnefSingleSubAvailAftDdnFailureIdleStatEn Tcl Parameter: N33NnefSingleSubAvailAftDdnFailureTrfDspDddTrfDspNum Tcl Parameter: N33NnefSingleSubAvailAftDdnFailureTrfDspDddTrfDspIpv4Addr Tcl Parameter: N33NnefSingleSubAvailAftDdnFailureTrfDspDddTrfDspIpv6Addr Tcl Parameter: N33NnefSingleSubAvailAftDdnFailureTrfDspDddTrfDspMacAddr Tcl Parameter: N33NnefSingleSubAvailAftDdnFailureTrfDspDddTrfDspPort Tcl Parameter: N33NnefSingleSubUpdatedAvailAfterDdnFailureEn Tcl Parameter: N33NnefSingleSubUpdatedAvailAftDdnFailureIdleStatEn Tcl Parameter: N33NnefSingleSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspNum Tcl Parameter: N33NnefSingleSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspIpv4Addr Tcl Parameter: N33NnefSingleSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspIpv6Addr Tcl Parameter: N33NnefSingleSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspMacAddr Tcl Parameter: N33NnefSingleSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspPort
API Support	Select to indicate "monitoringType" is "API_SUPPORT_CAPABILITY". This parameter shall be included to indicate the availability of all APIs supported by the serving network. Select to identify up to two available API Names in the ApiCapabilityInfo. Tcl Parameter: N33NnefSingleSubAPISupportCapEn Tcl Parameter: N33NnefSingleSubAPISupportCapAPINameNum Tcl Parameter: N33NnefSingleSubAPISupportCapAPIName_1 Tcl Parameter: N33NnefSingleSubUpdatedAPISupportCapEn Tcl Parameter: N33NnefSingleSubUpdatedAPISupportCapAPINameNum Tcl Parameter: N33NnefSingleSubUpdatedAPISupportCapAPIName_1
Location Reporting	Select to indicate "monitoringType" is "LOCATION_REPORTING". Select to identify a IPv4 Address / IPv6 Address. Enter a valid IPv4 Address and/or IPv6 Address. Select Location Type. Options : CURRENT_LOCATION, LAST_KNOWN_LOCATION, CURRENT_OR_LAST_KNOWN_LOCATION, INITIAL_LOCATION Default : CURRENT_LOCATION Tcl Parameter: N33NnefSingleSubLocationRptEn Tcl Parameter: N33NnefSingleSubLocationRptIpv4AddrEn Tcl Parameter: N33NnefSingleSubLocationRptIpv4Addr Tcl Parameter: N33NnefSingleSubLocationRptIpv6AddrEn Tcl Parameter: N33NnefSingleSubLocationRptIpv6Addr Tcl Parameter: N33NnefSingleSubLocationRptLocationTypeEn Tcl Parameter: N33NnefSingleSubLocationRptLocationType Tcl Parameter: N33NnefSingleSubUpdatedLocationRptEn Tcl Parameter: N33NnefSingleSubUpdatedLocationRptIpv4AddrEn Tcl Parameter: N33NnefSingleSubUpdatedLocationRptIpv4Addr Tcl Parameter: N33NnefSingleSubUpdatedLocationRptIpv6AddrEn Tcl Parameter: N33NnefSingleSubUpdatedLocationRptIpv6Addr Tcl Parameter: N33NnefSingleSubUpdatedLocationRptLocationTypeEn Tcl Parameter: N33NnefSingleSubUpdatedLocationRptLocationType
Downlink Data Delivery Status 5G	Select to indicate "monitoringType" is "DOWNLINK_DATA_DELIVERY_STATUS". # of DDD Traffic Descriptors (Select 0, 1, 2): IPV4 Addr, IPV6 Addr, MAC Addr, PORT. Tcl Parameter: N33NnefSingleSubDddeliveryStatusEn Tcl Parameter: N33NnefSingleSubDddeliveryStatusTrfDspDddTrfDspNum Tcl Parameter: N33NnefSingleSubDddeliveryStatusTrfDspDddTrfDspIpv4Addr Tcl Parameter: N33NnefSingleSubDddeliveryStatusTrfDspDddTrfDspIpv6Addr Tcl Parameter: N33NnefSingleSubDddeliveryStatusTrfDspDddTrfDspMacAddr Tcl Parameter: N33NnefSingleSubDddeliveryStatusTrfDspDddTrfDspPort Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusEn Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusTrfDspDddTrfDspNum Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusTrfDspDddTrfDspIpv4Addr Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusTrfDspDddTrfDspIpv6Addr Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusTrfDspDddTrfDspMacAddr Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusTrfDspDddTrfDspPort
Downlink Data Delivery Status	Select to includedfor event "DOWNLINK_DATA_DELIVERY_STATUS". The subscribed stati (delivered, transmitted, buffered) for the event. If omitted all stati are subscribed. Select : Buffered, Discarded, Transmitted Tcl Parameter: N33NnefSingleSubDddeliveryStatusBufferedEn Tcl Parameter: N33NnefSingleSubDddeliveryStatusDiscardedEn Tcl Parameter: N33NnefSingleSubDddeliveryStatusTransmittedEn Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusBufferedEn Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusDiscardedEn Tcl Parameter: N33NnefSingleSubUpdatedDddeliveryStatusTransmittedEn

Subscriber / Updated Events Settings - Group UE

NF Consumer AF-NEF (Additional data fields for NEF (Nnef) - To AF (N33)) - Subscribe Events / Updated Events Settings (Pop-up Panel) - Groupe UE

Subscribe Events Settings (AF-NEF)

Group UE

Available on the AF-NEF Tab when Subscribe Events Settings or Updated Events Settings are selected for Group UE. Available when Nnef Version >= 16.7.0/Sept2020.

Describes the events to be subscribed for this subscription.

Loss of Connectivity, Communication Failure, Roaming Status, PDN Connectivity Status, UE Reachability, Chnge of IMSI IMEI Association

For Availability After DNN Failure, select Idle Status Indication, # of DDD Traffic Descriptors (IPV4 Addr, IPV6 Addr, MAC Addr, PORT)

For Location Reporting, select : IPv4 Address, IPv4 Address, Location Type

For API Support, select API Names, Name

For Downlink Data Delivery Status 5G, select # of DDD Traffic Descriptors (IPV4 Addr, IPV6 Addr, MAC Addr, PORT)

Select Downlink Data Delivery Status - Buffered, Discarded, Transmitted

Number of UEs in an Area - External Group IDs , Group ID

Location Type

Locations Data Type and Location Data Type 5G - (Details below)

Civic Addresses - (Details below)

Network Area (Tracking Ara List, NCGI List, ECGI List, Global RAN Node List) - (Details below)

Routing Area Index , Tracking Area, Cell IDs, Enodeb IDs

Loss Of Connectivity

Select to indicate "monitoringType" is "LOSS_OF_CONNECTIVITY".

Select to enter the Maximum Detection Time (s). This parameter may be included to identify the maximum period of time after which the UE is considered to be unreachable.

Range : 1 to 2147483647

Default : 1

Tcl Parameter: N33NnefGroupSubLossOfConnEn

Tcl Parameter: N33NnefGroupSubLossOfConnMaxDectTimeEn

Tcl Parameter: N33NnefGroupSubLossOfConnMaxDectTime

Tcl Parameter: N33NnefGroupSubUpdatedLossOfConnEn

Tcl Parameter: N33NnefGroupSubUpdatedLossOfConnMaxDectTimeEn

Tcl Parameter: N33NnefGroupSubUpdatedLossOfConnMaxDectTime

Communication Failure

Select to indicate "monitoringType" is "COMMUNICATION_FAILURE".

Select to identify a IPv4 Address / IPv6 Address.

Enter a valid IPv4 Address and/or IPv6 Address.

Tcl Parameter: N33NnefGroupSubCommunicationFailureEn

Tcl Parameter: N33NnefGroupSubCommFailureIpv4AddrEn

Tcl Parameter: N33NnefGroupSubCommFailureIpv4Addr

Tcl Parameter: N33NnefGroupSubCommFailureIpv6AddrEn

Tcl Parameter: N33NnefGroupSubCommFailureIpv6Addr

Tcl Parameter: N33NnefGroupSubUpdatedCommunicationFailureEn

Tcl Parameter: N33NnefGroupSubUpdatedCommFailureIpv4AddrEn

Tcl Parameter: N33NnefGroupSubUpdatedCommFailureIpv4Addr

Tcl Parameter: N33NnefGroupSubUpdatedCommFailureIpv6AddrEn

Tcl Parameter: N33NnefGroupSubUpdatedCommFailureIpv6Addr

Roaming Status

Select to indicate "monitoringType" is "ROAMING_STATUS".

Select PLMN Indication. Option : false or true. This parameter may be included to indicate the notification of UE's Serving PLMN ID.

Tcl Parameter: N33NnefGroupSubRoamingStatusEn

Tcl Parameter: N33NnefGroupSubRoamingStatusPlmnIndicationEn

Tcl Parameter: N33NnefGroupSubUpdatedRoamingStatusEn

Tcl Parameter: N33NnefGroupSubUpdatedRoamingStatusPlmnIndicationEn

PDN Connectivity Status

Select to indicate "monitoringType" is "PDN_CONNECTIVITY_STATUS". This paramater is included to indicate the PDN connection details.

Tcl Parameter: N33NnefGroupSubPDNConnStatusEn

Tcl Parameter: N33NnefGroupSubUpdatedPDNConnStatusEn

UE Reachability

Select to indicate "monitoringType" is "UE_REACHABILITY".

Select to indicate the Reachability Type. This parameter is included to identify the reachability of the UE.

Options : SMS (default), Data.

Select to indicate the Max Response Time (s). This parameter is included to identify the length of time for which the UE stays reachable to allow the SCS/AS to reliably deliver the required downlink data.

Range : 1 to 2147483647 , Default : 500 (seconds)

Select to indicate the Maximum Latency (s). This parameter is included to identify the maximum delay acceptable for downlink data transfers.

Range : 1 to 2147483647 , Default : 500 (seconds)

Select to indicate the Idle Status Indication. Option : false or true. This parameter is included to indicate the notification of when a UE, for which PSM is enabled, transitions into idle mode. Select to indicate enabling of notification, do not select to indicate no need to notify.

Tcl Parameter: N33NnefGroupSubUeReachEn

Tcl Parameter: N33NnefGroupSubUeReachTypeEn

Tcl Parameter: N33NnefGroupSubUeReachType

Tcl Parameter: N33NnefGroupSubUeReachMaxRspTimeEn

Tcl Parameter: N33NnefGroupSubUeReachMaxRspTime

Tcl Parameter: N33NnefGroupSubUeReachMaxLatencyEn

Tcl Parameter: N33NnefGroupSubUeReachMaxLatency

Tcl Parameter: N33NnefGroupSubUeReachIdleStatusIndicationEn

Tcl Parameter: N33NnefGroupSubUpdatedUeReachEn

Tcl Parameter: N33NnefGroupSubUpdatedUeReachTypeEn

Tcl Parameter: N33NnefGroupSubUpdatedUeReachType

Tcl Parameter: N33NnefGroupSubUpdatedUeReachMaxRspTimeEn

Tcl Parameter: N33NnefGroupSubUpdatedUeReachMaxRspTime

Tcl Parameter: N33NnefGroupSubUpdatedUeReachMaxLatencyEn

Tcl Parameter: N33NnefGroupSubUpdatedUeReachMaxLatency

Tcl Parameter: N33NnefGroupSubUpdatedUeReachIdleStatusIndicationEn

Change of IMSI IMEI Association

Select to indicate "monitoringType" is "CHANGE_OF_IMSI_IMEI_ASSOC
IATION".

Select to indicate the Association Type. This parameter is included to indicate whether the change of IMSI-IMEI or IMSI-IMEISV association shall be detected.

Options : IMEI, (default), IMEISV

Tcl Parameter: N33NnefGroupSubChgIMSIIMEIAssoEn

Tcl Parameter: N33NnefGroupSubChgIMSIIMEIAssoTypeEn

Tcl Parameter: N33NnefGroupSubChgIMSIIMEIAssoType

Tcl Parameter: N33NnefGroupSubUpdatedChgIMSIIMEIAssoEn

Tcl Parameter: N33NnefGroupSubUpdatedChgIMSIIMEIAssoTypeEn

Tcl Parameter: N33NnefGroupSubUpdatedChgIMSIIMEIAssoType

Availability After DDN Failure

Select to indicate "monitoringType" is "AVAILABILITY_AFTER_DDN_FAILURE"

# of DDD Traffic Descriptors (Select 0, 1, 2): IPV4 Addr, IPV6 Addr, MAC Addr, PORT

Tcl Parameter: N33NnefGroupSubAvailAfterDdnFailureEn

Tcl Parameter: N33NnefGroupSubAvailAftDdnFailureIdleStatEn

Tcl Parameter: N33NnefGroupSubAvailAftDdnFailureTrfDspDddTrfDspNum

Tcl Parameter: N33NnefGroupSubAvailAftDdnFailureTrfDspDddTrfDspIpv4Addr

Tcl Parameter: N33NnefGroupSubAvailAftDdnFailureTrfDspDddTrfDspIpv6Addr

Tcl Parameter: N33NnefGroupSubAvailAftDdnFailureTrfDspDddTrfDspMacAddr

Tcl Parameter: N33NnefGroupSubAvailAftDdnFailureTrfDspDddTrfDspPort

Tcl Parameter: N33NnefGroupSubUpdatedAvailAfterDdnFailureEn

Tcl Parameter: N33NnefGroupSubUpdatedAvailAftDdnFailureIdleStatEn

Tcl Parameter: N33NnefGroupSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspNum

Tcl Parameter: N33NnefGroupSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspIpv4Addr

Tcl Parameter: N33NnefGroupSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspIpv6Addr

Tcl Parameter: N33NnefGroupSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspMacAddr

Tcl Parameter: N33NnefGroupSubUpdatedAvailAftDdnFailureTrfDspDddTrfDspPort

API Support

Select to indicate "monitoringType" is "API_SUPPORT_CAPABILITY".
This parameter shall be included to indicate the availability of all APIs
supported by the serving network.

Select to identify up to two available API Names in the ApiCapabilityInfo.

Tcl Parameter: N33NnefGroupSubAPISupportCapEn

Tcl Parameter: N33NnefGroupSubAPISupportCapAPINameNum

Tcl Parameter: N33NnefGroupSubAPISupportCapAPIName_1

Tcl Parameter: N33NnefGroupSubUpdatedAPISupportCapEn

Tcl Parameter: N33NnefGroupSubUpdatedAPISupportCapAPINameNum

Tcl Parameter: N33NnefGroupSubUpdatedAPISupportCapAPIName_1

Location Reporting

Select to indicate "monitoringType" is "LOCATION_REPORTING".

Select to identify a IPv4 Address / IPv6 Address.

Enter a valid IPv4 Address and/or IPv6 Address.

Select Location Type.

Options : CURRENT_LOCATION, LAST_KNOWN_LOCATION, CURRENT_OR_LAST_KNOWN_LOCATION, INITIAL_LOCATION

Default : CURRENT_LOCATION

Tcl Parameter: N33NnefGroupSubLocationRptEn

Tcl Parameter: N33NnefGroupSubLocationRptIpv4AddrEn

Tcl Parameter: N33NnefGroupSubLocationRptIpv4Addr

Tcl Parameter: N33NnefGroupSubLocationRptIpv6AddrEn

Tcl Parameter: N33NnefGroupSubLocationRptIpv6Addr

Tcl Parameter: N33NnefGroupSubLocationRptLocationTypeEn

Tcl Parameter: N33NnefGroupSubLocationRptLocationType

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptEn

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptIpv4AddrEn

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptIpv4Addr

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptIpv6AddrEn

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptIpv6Addr

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptLocationTypeEn

Tcl Parameter: N33NnefGroupSubUpdatedLocationRptLocationType

Downlink Data Delivery Status 5G

Select to indicate "monitoringType" is "DOWNLINK_DATA_DELIVERY_STATUS".

# of DDD Traffic Descriptors (Select 0, 1, 2): IPV4 Addr, IPV6 Addr, MAC Addr, PORT.

Tcl Parameter: N33NnefGroupSubDddeliveryStatusEn

Tcl Parameter: N33NnefGroupSubDddeliveryStatusTrfDspDddTrfDspNum

Tcl Parameter: N33NnefGroupSubDddeliveryStatusTrfDspDddTrfDspIpv4Addr

Tcl Parameter: N33NnefGroupSubDddeliveryStatusTrfDspDddTrfDspIpv6Addr

Tcl Parameter: N33NnefGroupSubDddeliveryStatusTrfDspDddTrfDspMacAddr

Tcl Parameter: N33NnefGroupSubDddeliveryStatusTrfDspDddTrfDspPort

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusEn

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusTrfDspDddTrfDspNum

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusTrfDspDddTrfDspIpv4Addr

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusTrfDspDddTrfDspIpv6Addr

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusTrfDspDddTrfDspMacAddr

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusTrfDspDddTrfDspPort

Downlink Data Delivery Status

Select to include for event "DOWNLINK_DATA_DELIVERY_STATUS". The subscribed stati (delivered, transmitted, buffered) for the event. If omitted all stati are subscribed.

Select : Buffered, Discarded, Transmitted

Tcl Parameter: N33NnefGroupSubDddeliveryStatusBufferedEn

Tcl Parameter: N33NnefGroupSubDddeliveryStatusDiscardedEn

Tcl Parameter: N33NnefGroupSubDddeliveryStatusTransmittedEn

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusBufferedEn

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusDiscardedEn

Tcl Parameter: N33NnefGroupSubUpdatedDddeliveryStatusTransmittedEn

Number of UEs in an Area

Select to indicate "monitoringType" is "NUMBER_OF_UES_IN_AN_AREA".

Select up to 3 External Group IDs and enter the Group ID in the table provided. Identifies a user group as defined in Clause 4.6.2 of 3GPP TS 23.682.

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaExtGroupIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaExtGroupId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaExtGroupIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaExtGroupId_1

Location Type

Enable to select the Location Type. Available when Number of UEs in an Area is enabled.

Select Location Type.

Options : CURRENT_LOCATION, LAST_KNOWN_LOCATION, CURRENT_OR_LAST_KNOWN_LOCATION, INITIAL_LOCATION

Default : CURRENT_LOCATION

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocationTypeEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocationType

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocationTypeEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocationType

Location Data Type

Location Data Type 5G

Select Geographic Areas and enter the Number of Geographic Areas: Available when Number of UEs in an Area is enabled.

Number of Geographic Areas.

Range : 1 to 4

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaNum

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaNum

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaNum

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaNum

Geographic Area Type

Use the drop-down list to select the Geographical Area type reporting. The applicable parameters are enabled based on your selection.

Options:

Point
Point With Uncertainty Circle
Point With Uncertainty Ellipse
Polygon
Point Altitude
Point Altitude Uncertainty
Ellipsoid Arc

Default: Point

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaGeoAreaType_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaGeoAreaType_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaGeoAreaType_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaGeoAreaType_1

Latitude (°)

Available for all Geographic Area Types except Polygon.

Enter Latitude point coordinate in (°) degrees.

Range : -90.0 to 90.0

Default: 39.9910665

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaLatitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaLatitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaLatitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaLatitude_1

Longitude (°)

Available for all Geographic Area Types except Polygon.

Enter Longitude point coordinate in (°) degrees.

Range : -180.0 to 180.0

Default: 116.3586652

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaLongitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaLongitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaLongitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaLongitude_1

Uncertainty (m)

Available when Geographic Area Type = Point Uncertainty Circle.

Enter the uncertainty for Point Uncertainty Circle in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaUncertainty_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaUncertainty_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaUncertainty_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaUncertainty_1

Uncertainty Semi Major (m)

Uncertainty Semi Minor (m)

Uncertainty Orientation (m)

Available when Geographic Area Type = Point Uncertainty Ellipse or Point Altitude Uncertainty.

Enter the Uncertainty Semi Major and Semi Minor in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaUncertaintySemiMajor_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaUncertaintySemiMajor_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaUncertaintySemiMajor_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaUncertaintySemiMajor_1

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaUncertaintySemiMinor_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaUncertaintySemiMinor_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaUncertaintySemiMinor_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaUncertaintySemiMinor_1

Enter the Uncertainty Orientation.

Range : 0 to 180

Default: 0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaUncertaintyOrientation_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaUncertaintyOrientation_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaUncertaintyOrientation_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaUncertaintyOrientation_1

Confidence (%)

Available when Geographic Area Type = Point Uncertainty Ellipse or Point Altitude Uncertainty or Ellipsoid Arc.

Enter the Confidence in percentage value.

Range : 0 to 100

Default: 0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaConfidence_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaConfidence_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaConfidence_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaConfidence_1

Altitude (m)

Available when Geographic Area Type = Point Altitude or Point Altitude Uncertainty.

Enter the Altitude in meters.

Range : -32767.0 to 32767.0

Default: 0.0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaAltitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaAltitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaAltitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaAltitude_1

Uncertainty Altitude (m)

Available when Geographic Area Type = Point Altitude Uncertainty.

Enter the Uncertainty Altitude in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaUncertaintyAltitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaUncertaintyAltitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaUncertaintyAltitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaUncertaintyAltitude_1

Arc Settings

Inner Radius (m)

Uncertain Radius (m)

Offset Angle (°)

Included Angle (°)

Available when Geographic Area Type = Ellipsoid Arc.

Enter the Inner Radius in meters.

Range : 0 to 327675

Default: 0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaInnerRadius_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaInnerRadius_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaInnerRadius_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaInnerRadius_1

Enter the Uncertain Radius in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaUncertaintyRadius_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaUncertaintyRadius_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaUncertaintyRadius_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaUndertaintyRadius_1

Enter the Offset Angle and Included Angle in degrees.

Range : 0 to 360

Default: 0

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaOffsetAngle_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaOffsetAngle_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaOffsetAngle_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaOffsetAngle_1

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaIncludedAngle_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaIncludedAngle_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaIncludedAngle_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaIncludedAngle_1

Polygon

Available when Geographic Area Type = Polygon.

Enter the Number of Points.

Range : 3 to 15

Default: 3

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaPointNum_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaPointNum_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaPointNum_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaPointNum_1

Enter the Latitude (Range : -90.0 to 90.0) and Longitude (Range : -180.0 to 180.0) for each Point.

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaPointLatitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaPointLatitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaPointLatitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaPointLatitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataGaPointLongitude_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataGaPointLongitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataGaPointLongitude_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataGaPointLongitude_1

Civic Addresses.

Select to capture the Civic Addresses for Expected UE Movements.

Available when Number of UEs in an Area is enabled.

Select to enter the Number of Civic Addresses (up to 4)

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaNum

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaNum

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaNum

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaNum

Country	Enter the Country Code. The two-letter ISO 3166 country code in capital ASCII letters, e.g., DE or US. IETF RFC 4776 Default : US Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaCo_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaCo_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaCo_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaCo_1
A1	Select to enter National subdivisions (state, canton, region, province, prefecture). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA1En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA1En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA1En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA1En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA1_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA1_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA1_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA1_1
A2	Select to enter County, parish, gun (JP), district (IN). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA2En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA2En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA2En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA2En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA2_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA2_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA2_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA2_1
A3	Select to enter City, township, shi (JP). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA3En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA3En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA3En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA3En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA3_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA3_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA3_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA3_1
A4	Select to enter City division, borough, city district, ward, chou (JP). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA4En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA4En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA4En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA4En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA4_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA4_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA4_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA4_1
A5	Select to enter neighborhood, block. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA5En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA5En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA5En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA5En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA5_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA5_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA5_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA5_1
A6	Select to enter Group of streets below the neighborhood level. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA6En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA6En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA6En_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA6En_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaA6_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaA6_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaA6_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaA6_1
PRD	Select to enter Leading street direction. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPrdEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPrdEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPrdEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPrdEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPrd_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPrd_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPrd_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPrd_1
POD	Select to enter Trailing street suffix. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPodEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPodEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPodEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPodEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPod_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPod_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPod_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPod_1
STS	Select to enter Street suffix or type. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaStsEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaStsEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaStsEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaStsEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaSts_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaSts_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaSts_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaSts_1
HNO	Select to enter House number. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaHnoEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaHnoEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaHnoEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaHnoEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaHno_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaHno_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaHno_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaHno_1
HNS	Select to enter House number suffix. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaHnsEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaHnsEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaHnsEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaHnsEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaHns_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaHns_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaHns_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaHns_1
LMK	Select to enter Landmark or vanity address. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaLmkEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaLmkEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaLmkEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaLmkEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaLmk_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaLmk_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaLmk_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaLmk_1
LOC	Select to enter Additional location information. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaLocEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaLocEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaLocEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaLocEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaLoc_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaLoc_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaLoc_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaLoc_1
NAM	Select to enter Name (residence and office occupant). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaNamEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaNamEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaNamEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaNamEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaNam_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaNam_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaNam_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaNam_1
PC	Select to enter Postal/zip code. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPcEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPcEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPcEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPcEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPc_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPc_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPc_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPc_1
BLD	Select to enter Building (structure). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaBldEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaBldEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaBldEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaBldEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaBld_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaBld_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaBld_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaBld_1
UNIT	Select to enter Unit (apartment, suite). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaUnitEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaUnitEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaUnitEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaUnitEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaUnit_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaUnit_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaUnit_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaUnit_1
FLR	Select to enter Floor. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaFlrEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaFlrEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaFlrEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaFlrEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaFlr_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaFlr_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaFlr_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaFlr_1
ROOM	Select to enter Room. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRoomEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRoomEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRoomEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRoomEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRoom_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRoom_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRoom_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRoom_1
PLC	Select to enter Place-type. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPlcEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPlcEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPlcEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPlcEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPlc_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPlc_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPlc_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPlc_1
PCN	Select to enter Postal community name. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPcnEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPcnEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPcnEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPcnEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPcn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPcn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPcn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPcn_1
POBOX	Select to enter Post office box (P.O. box). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPoboxEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPoboxEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPoboxEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPoboxEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPobox_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPobox_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPobox_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPobox_1
ADDCODE	Select to enter Additional code. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaAddcodeEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaAddcodeEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaAddcodeEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaAddcodeEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaAddcode_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaAddcode_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaAddcode_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaAddcode_1
SEAT	Select to enter Seat (desk, cubicle, workstation). Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaSeatEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaSeatEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaSeatEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaSeatEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaSeat_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaSeat_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaSeat_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaSeat_1
RD	Select to enter Primary road or street. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRd_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRd_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRd_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRd_1
RDSEC	Select to enter Road clause. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdsecEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdsecEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdsecEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdsecEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdsec_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdsec_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdsec_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdsec_1
RDBR	Select to enter Road branch. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdbrEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdbrEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdbrEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdbrEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdbr_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdbr_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdbr_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdbr_1
RDSUBBR	Select to enter Road sub-branch. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdsubbrEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdsubbrEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdsubbrEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdsubbrEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaRdsubbr_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaRdsubbr_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaRdsubbr_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaRdsubbr_1
PRM	Select to enter Road pre-modifier. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPrmEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPrmEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPrmEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPrmEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPrm_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPrm_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPrm_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPrm_1
POM	Select to enter Road post-modifier. Range : up to 128 characters. Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPomEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPomEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPomEn_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPomEn_1 Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCaPom_1 Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCaPom_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCaPom_1 Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCaPom_1

Select to enter Routing Area Index details.

Select to enter the Routing IDs (up to 3).

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataRoutingAreaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataRoutingAreaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataRoutingAreaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataRoutingAreaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataRoutingAreaIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataRoutingAreaIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataRoutingAreaIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataRoutingAreaIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataRoutingAreaId_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataRoutingAreaId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataRoutingAreaId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataRoutingAreaId_1

Select to enter Tracking Area details.

Select to enter the Tracking Area IDs (up to 3).

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataTrackingAreaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataTrackingAreaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataTrackingAreaEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataTrackingAreaEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataTrackingAreaIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataTrackingAreaIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataTrackingAreaIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataTrackingAreaIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataTrackingAreaId_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataTrackingAreaId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataTrackingAreaId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataTrackingAreaId_1

Select to enter Cell Ids details.

Select to enter the Cell ID Index (up to 3).

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCellIdEn

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCellIdEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCellIdEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCellIdEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCellIdIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCellIdIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCellIdIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCellIdIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataCellId_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataCellId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataCellId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataCellId_1

Select to enter EnodeB Ids details.

Select to enter the EnodeB ID Index (up to 3).

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataEnodebIdEn

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataEnodebIdEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataEnodebIdEn

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataEnodebIdEn

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataEnodebIdIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataEnodebIdIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataEnodebIdIndex

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataEnodebIdIndex

Tcl Parameter: N33NnefGroupSubNumOfUEInAreaLocDataEnodebId_1

Tcl Parameter: N33NnefGroupSubNumOfUEInArea5GLocDataEnodebId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInAreaLocDataEnodebId_1

Tcl Parameter: N33NnefGroupSubUpdatedNumOfUEInArea5GLocDataEnodebId_1

NIDD Configuration

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the NIDD API on the N33 interface as per 23.502 4.25 Procedures for NEF based Non-IP Data Delivery per 29.522 Version 16.7.0.

Enable NIDD Configuration

Enable NIDD (Non-IP Data Delivery) Configuration and enter the Number of NIDD Configurations. The Number of NIDD Configurations must be <= Number of PDU Sessions and <= Network Devices/AF SBI Node - server # of Nodes.

Range : 1 to 5, Default : 1

Tcl Parameter: N33NnefNiddCfgEn

Tcl Parameter: N33NnefNiddCfgNum

External ID MSISDN

External Group ID

Click to select External ID , MSISDN, External Group ID.

Mutually exclusive. Default = MSISDN.

When External Group ID is selected, enter it in the space provided.

Default = [email protected]

Tcl Parameter: N33NnefNiddExtIdEn_1

Tcl Parameter: N33NnefNiddMsisdnEn_1

Tcl Parameter: N33NnefNiddExtGrpIdEn_1

Tcl Parameter: N33NnefNiddExtGrpId_1

MTC Provider ID

Select to enter the MTC Provider ID.

Default : mtc provider id 1

Tcl Parameter: N33NnefNiddMtcIdEn_1

Tcl Parameter: N33NnefNiddMtcId_1

Manage Port

Select to enter up to 3 Manage Ports. Select the Number of Manage Port.

Range : 1 to 3 , default : 1

For each Manage Port, enter:

Enter the Application ID. Default : app id 1

Enable Skip UE Inquiry.

Enter the Port ID - UE and EF.

Range : 0 to 15, default : 0

Tcl Parameter: N33NnefNiddManagePortEn_1

Tcl Parameter: N33NnefNiddManagePortNum_1

Tcl Parameter: N33NnefNiddManagePortAppId_1_1

Tcl Parameter: N33NnefNiddManagePortSkipUeInquiry_1_1

Tcl Parameter: N33NnefNiddManagePortUeId_1_1

Tcl Parameter: N33NnefNiddManagePortEfId_1_1

Original Settings/ Update Settings

Original Settings / Update Settings for NIDD Configuration.

Original Settings / Update Settings.

Duration	Select to enter the Duration in seconds for original / update settings. Range : 0 to 4294967295, Default : 0 Tcl Parameter: N33NnefNiddOrgDurationEn_1 Tcl Parameter: N33NnefNiddOrgDuration_1 Tcl Parameter: N33NnefNiddUpdDurationEn_1 Tcl Parameter: N33NnefNiddUpdDuration_1
PDN Establishment Option	Select to enter the PDN Establishment Option for original / update settings. Options : WAIT_FOR_UE (default),INDICATE_ERROR, SEND_TRIGGER Tcl Parameter: N33NnefNiddOrgPdnEstOptionEn_1 Tcl Parameter: N33NnefNiddOrgPdnEstOption_1 Tcl Parameter: N33NnefNiddUpdPdnEstOptionEn_1 Tcl Parameter: N33NnefNiddUpdPdnEstOption_1
# of RDS Ports	Select to enter the # of RDS Ports for original / update settings. Range : 0 to 5, Default : 0 Enter the UE and NEF. Range : 0 to 65535, Default : 0 Tcl Parameter: N33NnefNiddOrgRdsPortsNum_1 Tcl Parameter: N33NnefNiddOrgRdsPort_1_1 Tcl Parameter: N33NnefNiddUpdRdsPortsNum_1 Tcl Parameter: N33NnefNiddUpdRdsPort_1_1
NIDD Downlink Data Transfer	Select to enter the Number of NIDD Downlink Data Transfer for original / update settings. Range : 1 to 3, Default : 1 Enter the Delivered Data. Range : 1 to 2048, Default : 00 Select to enter the Maximum Lantency. Range : 0 to 4294967295, Default : 10 Select to enter the Priority. Range : 0 to 4294967295, Default : 0 Select to enter the RDS Port and the UE and NEF for the RDS Port. Range : 0 to 65535, Default : 0 Tcl Parameter: N33NnefNiddOrgDLDataTransEn_1 Tcl Parameter: N33NnefNiddOrgDLDataTransNum_1 Tcl Parameter: N33NnefNiddOrgDLDataTransData_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransMaxLatEn_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransMaxLat_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransPriorityEn_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransPriority_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransRdsPortEn_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransRdsPortUe_1_1 Tcl Parameter: N33NnefNiddOrgDLDataTransRdsPortNef_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransEn_1 Tcl Parameter: N33NnefNiddUpdDLDataTransNum_1 Tcl Parameter: N33NnefNiddUpdDLDataTransData_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransMaxLatEn_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransMaxLat_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransPriorityEn_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransPriority_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransRdsPortEn_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransRdsPortUe_1_1 Tcl Parameter: N33NnefNiddUpdDLDataTransRdsPortNef_1_1

Device Triggering

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the DeviceTriggering API on the N33 interface as per 23.502 4.13.2.2. Procedures for Device Triggering procedure via Nnef.

Device Triggering

Enter the Number of Device Triggers.

Range : 1 to 16, Default : 1

Tcl Parameter: N33NnefDevTrigNum

Supported Features	Enter the Supported Features for Device Triggering. Range : 1 to 128 Hex , Default : 1f Tcl Parameter: N33NnefDevTrigSuppFeat_1
Trigger Payload	Enter the Trigger Payload for Device Triggering. Range : 1 to 256 (base64 encoded payload data) Default : U3BpcmVudA== Tcl Parameter: N33NnefDevTrigPayload_1
Priority	Select the Priority for Device Triggering. Options : NO_PRIORITY, PRIORITY Default : NO_PRIORITY Tcl Parameter: N33NnefDevTrigPriority_1
Validity Period (s)	Enter the Validity Period in seconds for Device Triggering. Range : 0 to 65535 Default : 3600 Tcl Parameter: N33NnefDevTrigValPer_1
Application Port ID	Enter the Application Port Id for Device Triggering. Range : 0 to 65535 Default : 6000 Tcl Parameter: N33NnefDevTrigAppPortId_1
App Source Port ID	Enable to enter the App Source Port Id for Device Triggering. Range : 0 to 65535 Default : 5000 Tcl Parameter: N33NnefDevTrigAppSrcPortIdEn_1 Tcl Parameter: N33NnefDevTrigAppSrcPortId_1
Request Test Notification	Enable to select Request Test Notification for Device Triggering. Options : True or False Default : True Tcl Parameter: N33NnefDevTrigReqTestNtfEn_1 Tcl Parameter: N33NnefDevTrigReqTestNtf_1
Websock Notification Configuration	Enable to select Websock Notification Configuration for Device Triggering. Options : True or False Default : True Tcl Parameter: N33NnefDevTrigWsNtfCfgEn_1 Tcl Parameter: N33NnefDevTrigWsNtfCfg_1

Communication Pattern Parameters Provisioning

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_ParameterProvision service on the N33 interface as per 23.502 section 5.2.6.2

Procedures for Communication Pattern Parameter Provision procedure via Nnef.

Communication Pattern Parameters Provisioning

Select Communication Pattern Parameters Provisioning to enable the capture of the following parameters.

Enter the Number of Communication Pattern Info.

Range : 1 to 6, Default : 1

Tcl Parameter: N33NnefCpPpEn

Tcl Parameter: N33NnefCpPpInfoNum

External ID

MSISDN

External Group ID

Select External ID, MSISDN or External Group ID for CP Info.

One must be selected.

When External Group ID is enabled, enter the external group id.

Default : [email protected]

Tcl Parameter: N33NnefCpPpInfoExtIdEn_1

Tcl Parameter: N33NnefCpPpInfoMsisdnEn_1

Tcl Parameter: N33NnefCpPpInfoExtGrpIdEn_1

Tcl Parameter: N33NnefCpPpInfoExtGrpId_1

MTC Provider ID

Select to enter the MTC Provider ID.

Default : mtc provider id 1

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoMtcIdEn_1_0

Tcl Parameter: N33NnefCpPpInfoMtcId_1_0

Tcl Parameter: N33NnefCpPpInfoMtcIdEn_1_1

Tcl Parameter: N33NnefCpPpInfoMtcId_1_1

Number of Communication Pattern Set

Enter up to 3 communication pattern sets. For each communication pattern set, enter the parameters under the "Communication Pattern Set" pane.

Range : 1 to 3

Default : 1

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetNum_1_0

Tcl Parameter: N33NnefCpPpInfoSetNum_1_1

Period Time

Select to enter the period time.

Range : 0 to 2147483647

Default : 5000

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetPeriodTimeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetPeriodTime_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetPeriodTimeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetPeriodTime_1_1_1_1

Communication Duration Time

Select to enter the communication duration time.

Range : 0 to 2147483647

Default : 500

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetCommDurationTimeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetCommDurationTime_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetCommDurationTimeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetCommDurationTime_1_1_1_1

Include Validity Time

Validity Time

Relative Validity Time

Select to include the validity time. When enables, enter either the validity time or the relative validity time.

Select to enter the Validity time in UTC format.

Select to enter the Relative Validity time in seconds.

Range : 0 to 2147483647

Default : 100

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetValTimeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetVal_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetValTime_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetRelaValTime_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetValTimeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetVal_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetValTime_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetRelaValTime_1_1_1_1

Scheduled Communication Time

Number of Days of Week

Start Time

End Time

Select to include the scheduled communication time. When enabled, select the Number of Days of Week and enter the Days of Week in the table provided. Range : 0 to 7

Enable Start Time to enter a starting time in 24 hour time format. Range : 00:00:00 to 24:00:00, default : 00:00:00

Enable End Time to enter an ending time in 24 hour time format. Range : 00:00:00 to 24:00:00, default : 00:00:00

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeDayOfWeekNum_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeDayOfWeek_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeStartTimeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeStartTime_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeEndTimeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeEndTime_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeDayOfWeekNum_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeDayOfWeek_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeStartTimeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeStartTime_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeEndTimeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchCommTimeEndTime_1_1_1_1

Scheduled Communication Type

Select to enter the scheduled communication type.

Options : DOWNLINK, UPLINK, BIDIRECTIONAL

Default : BIDIRECTIONAL

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetSchCommTypeEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetCommType_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetCommTypeEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetCommType_1_1_1_1

Battery Indication

Enable to select the Battery Indication. Any or all can be selected.

Select : BATTERY_RECHARGE, BATTERY_REPLACE, BATTERY_NO_RECHARGE, BATTERY_NO_REPLACE, NO_BATTERY

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetSchBatteryIndcEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchBatteryIndic_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetSchBatteryIndicEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetSchBatteryIndic_1_1_1_1

Traffic Profile

Enable to select the traffic profile.

Select : SINGLE_TRANS_UL, SINGLE_TRANS_DL, DUAL_TRANS_UL_FIRST, DUAL_TRANS_DL_FIRST, MULTI_TRANS

Default : MULTI_TRANS

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetTraProEn_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetTraPro_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetTraProEn_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetTraPro_1_1_1_1

Number of Expected UMT

Select the Number of Expected UMTs. When selected, enter Day Time and Duration Second in the table provided.

Range : 0 to 7

Enter the Day Time. Range : 1 to 7

Enter the Duration Second. Range : 1 to 2147483647

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetExpUmtNum_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDay_1_1_1_0_1

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDuration_1_1_1_0_1

Tcl Parameter: N33NnefCpPpInfoSetExpUmtNum_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDay_1_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDuration_1_1_1_1_1

Number of Expected UMT Days

Select the Number of Expected UMT Days. When selected, enter Expected UMT Day in the table provided.

Enter the Expected UMT Day. Range : 1 to 7

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDaysNum_1_1_1_0

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDaysDay_1_1_1_0_1

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDaysNum_1_1_1_1

Tcl Parameter: N33NnefCpPpInfoSetExpUmtDaysDay_1_1_1_1_1

Network Configuration Parameters Provisioning

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_ParameterProvision service on the N33 interface as per 23.502 section 5.2.6.2

Procedures for Network Configuration Parameter Provision procedure via Nnef.

Network Configuration Parameters Provisioning

Select Network Configuration Parameters Provisioning to enable the capture of the following parameters.

Enter the Number of Network Configuration.

Range : 1 to 6, Default : 1

Tcl Parameter: N33NnefNpPpEn

Tcl Parameter: N33NnefNpPpConfNum

External ID

MSISDN

External Group ID

Select External ID, MSISDN or External Group ID for NP Info.

One must be selected.

When External Group ID is enabled, enter the external group id.

Default : [email protected]

Tcl Parameter: N33NnefNpPpConfExtIdEn_1

Tcl Parameter: N33NnefNpPpConfMsisdnEn_1

Tcl Parameter: N33NnefNpPpConfExtGrpIdEn_1

Tcl Parameter: N33NnefNpPpConfExtGrpId_1

MTC Provider ID

Select to enter the MTC Provider ID.

Default : mtc provider id 1

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefNpPpConfMtcIdEn_1_0

Tcl Parameter: N33NnefNpPpConfMtcId_1_0

Tcl Parameter: N33NnefNpPpConfMtcIdEn_1_1

Tcl Parameter: N33NnefNpPpConfMtcId_1_1

Maximum Response Time

Select to enter the maximum response time.

Range : 1 to 2147483647

Default : 1

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefNpPpConfMaxRespTimeEn_1_0

Tcl Parameter: N33NnefNpPpConfMaxRespTime_1_0

Tcl Parameter: N33NnefNpPpConfMaxRespTimeEn_1_1

Tcl Parameter: N33NnefNpPpConfMaxRespTime_1_1

Maximum Latency

Select to enter the maximum latency.

Range : 1 to 2147483647

Default : 1

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefNpPpConfMaxLatencyEn_1_0

Tcl Parameter: N33NnefNpPpConfMaxLatency_1_0

Tcl Parameter: N33NnefNpPpConfMaxLatencyEn_1_1

Tcl Parameter: N33NnefNpPpConfMaxLatency_1_1

Suggested Number of Downlink Packets

Select to enter the suggested number of downlink packets.

Range : 1 to 2147483647

Default : 1

For Original table, tcl variable ends with 0. For Update table, it ends with is 1.

Tcl Parameter: N33NnefNpPpConfSugNumOfDownlinkPacketEn_1_0

Tcl Parameter: N33NnefNpPpConfSugNumOfDownlinkPacket_1_0

Tcl Parameter: N33NnefNpPpConfSugNumOfDownlinkPacketEn_1_1

Tcl Parameter: N33NnefNpPpConfSugNumOfDownlinkPacket_1_1

5G LAN Parameters Provisioning

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_ParameterProvision service on the N33 interface as per 23.502 section 5.2.6.2

Procedures for 5G LAN Parameter Provision procedure via Nnef.

5G LAN Parameters Provisioning

Select 5G LAN Parameters Provisioning to enable the capture of the following parameters.

Enter the GPSI Start (General Public Subscription Identifier). Enter 1 to 16 digits for GPSI (General Public Subscription Identifier).

Enter the Number of GPSIs.

Range : 1 to 128

Default : 1

Enter the 5G LAN Parameters Provisioning.

Range : 1 to 5, Default : 1

Tcl Parameter: N33Nnef5gLanPpEn

Tcl Parameter: N33Nnef5gLanGpsisStart

Tcl Parameter: N33Nnef5gLanGpsisNum

Tcl Parameter: N33Nnef5gLanPpNum

External Group ID

Enter the external group id.

Default : [email protected]

Tcl Parameter: N33Nnef5gLanPpExtGrpId_1

MTC Provider ID

Select to enter the MTC Provider ID.

Default : mtc provider id 1

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33Nnef5gLanPpMtcIdEn_1_0

Tcl Parameter: N33Nnef5gLanPpMtcId_1_0

Tcl Parameter: N33Nnef5gLanPpMtcIdEn_1_1

Tcl Parameter: N33Nnef5gLanPpMtcId_1_1

SST

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

SST : 0 up to 255

Select to enter the SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N33Nnef5gLanPpSstEn_1_0

Tcl Parameter: N33Nnef5gLanPpSdEn_1_0

Tcl Parameter: N33Nnef5gLanPpSd_1_0

Tcl Parameter: N33Nnef5gLanPpSstEn_1_1

Tcl Parameter: N33Nnef5gLanPpSdEn_1_1

Tcl Parameter: N33Nnef5gLanPpSd_1_1

DNN

Enter the DNN (Data Network Name).

Default : ims

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33Nnef5gLanPpDnn_1_0

Tcl Parameter: N33Nnef5gLanPpDnn_1_1

GPSI Start Index

Enter the GPSI (General Public Subscription Identifier) Start Index.

Range : 0 to 128

Default : 0

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33Nnef5gLanPpGpsiStart_1_0

Tcl Parameter: N33Nnef5gLanPpGpsiStart_1_1

GPSI End Index

Enter the GPSI (General Public Subscription Identifier) End Index.

Range : 0 to 128

Default : 0

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33Nnef5gLanPpGpsiEnd_1_0

Tcl Parameter: N33Nnef5gLanPpGpsiEnd_1_1

PDU Session Type

Select the PDU Session Type.

Options : IPV4, IPV6, IPV4V6, UNSTRUCTURED, ETHERNET

Default : IPV4

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33Nnef5gLanPpPduSessType_1_0

Tcl Parameter: N33Nnef5gLanPpPduSessType_1_1

Number of App Descriptors

App Descriptor

Operating System ID

Number of Application IDs

Application ID

Select the Number of App Descriptors.

Range : 1 to 5

Default : 1

Enter the Operating System Id.

Default : osid 1

Select the Number of Application IDs.

Range : 1 to 5

Default : 1

Enter the Application ID in the table provided. Default : app id 1

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33Nnef5gLanPpAppDespNum_1_0

Tcl Parameter: N33Nnef5gLanPpOsId_1_0_1

Tcl Parameter: N33Nnef5gLanPpAppIdNum_1_0_1

Tcl Parameter: N33Nnef5gLanPpAppId_1_0_1_1

Tcl Parameter: N33Nnef5gLanPpAppDespNum_1_1

Tcl Parameter: N33Nnef5gLanPpOsId_1_1_1

Tcl Parameter: N33Nnef5gLanPpAppIdNum_1_1_1

Tcl Parameter: N33Nnef5gLanPpAppId_1_1_1_1

ACS Parameters Provisioning

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_ParameterProvision service on the N33 interface as per 23.502 section 5.2.6.2

Procedures for ACS Parameter Provision procedure via Nnef.

ACS Parameters Provisioning

Select ACS (Auto-Configuration Server) Parameters Provisioning to enable the capture of the following parameters.

Enter the Number of ACS Parameters Provisioning.

Range : 1 to 5, Default : 1

Tcl Parameter: N33NnefAcsPpEn

Tcl Parameter: N33NnefAcsPpNum

GPSI

External Group ID

Select GPSI (General Public Subscription Identifier) or External group id and enter it in the input box.

Default : [email protected]

Tcl Parameter: N33NnefAcsPpGpsiEn_1

Tcl Parameter: N33NnefAcsPpExtGrpIdEn_1

Tcl Parameter: N33NnefAcsPpExtGrpId_1

MTC Provider ID

Select to enter the MTC Provider ID.

Default : mtc provider id 1

Tcl Parameter: N33NnefAcsPpMtcIdEn_1

Tcl Parameter: N33NnefAcsPpMtcId_1

ACS URL

Select to enter a valid URL for ACS Parameters Provisioning.

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33NnefAcsPpAcsUrlEn_1_0

Tcl Parameter: N33NnefAcsPpAcsUrl_1_0

Tcl Parameter: N33NnefAcsPpAcsUrlEn_1_1

Tcl Parameter: N33NnefAcsPpAcsUrl_1_1

ACS IPv4 Address

Select to enter a valid IPv4 Address for ACS Parameters Provisioning.

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33NnefAcsPpAcsIpv4AddrEn_1_0

Tcl Parameter: N33NnefAcsPpAcsIpv4Addr_1_0

Tcl Parameter: N33NnefAcsPpAcsIpv4AddrEn_1_1

Tcl Parameter: N33NnefAcsPpAcsIpv4Addr_1_1

ACS IPv6 Address

Select to enter a valid IPv6 Address for ACS Parameters Provisioning.

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33NnefAcsPpAcsIpv6AddrEn_1_0

Tcl Parameter: N33NnefAcsPpAcsIpv6Addr_1_0

Tcl Parameter: N33NnefAcsPpAcsIpv6AddrEn_1_1

Tcl Parameter: N33NnefAcsPpAcsIpv6Addr_1_1

LPI Parameters Provisioning

Available when Nnef Version > = 16.7.0/Sept2020. Adds support for the Nnef_ParameterProvision service on the N33 interface as per 23.502 section 5.2.6.2

Procedures for LPI Parameter Provision procedure via Nnef.

LPI Parameters Provisioning

Select LPI Parameters Provisioning to enable the capture of the following parameters.

Enter the Number of LPI Parameters Provisioning.

Range : 1 to 5, Default : 1

Tcl Parameter: N33NnefLpiPpEn

Tcl Parameter: N33NnefLpiPpNum

GPSI

External Group ID

Select GPSI (General Public Subscription Identifier) or External group id and enter it in the input box.

Default : [email protected]

Tcl Parameter: N33NnefLpiPpGpsiEn_1

Tcl Parameter: N33NnefLpiPpExtGrpIdEn_1

Tcl Parameter: N33NnefLpiPpExtGrpId_1

MTC Provider ID

Select to enter the MTC Provider ID.

Default : mtc provider id 1

Tcl Parameter: N33NnefLpiPpMtcIdEn_1

Tcl Parameter: N33NnefLpiPpMtcId_1

Location Privacy Indication

Select the location privacy indication.

Options : LOCATION_DISALLOWED, LOCATION_ALLOWED

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33NnefLpiPpLpi_1_0

Tcl Parameter: N33NnefLpiPpLpi_1_1

Valid Start Time

Select valid start time and enter either the Start time in UTC format or the relative start time in seconds.

Select Start Time in RF 3339 in UTC format.

Select Relative Start Time and enter the time in seconds.

Range : 1 to 999999

Default : 1

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33NnefLpiPpValidStartTimeEn_1_0

Tcl Parameter: N33NnefLpiPpValidStart_1_0

Tcl Parameter: N33NnefLpiPpValidStartTime_1_0

Tcl Parameter: N33NnefLpiPpValidStartTimeRel_1_0

Tcl Parameter: N33NnefLpiPpValidStartTimeEn_1_1

Tcl Parameter: N33NnefLpiPpValidStart_1_1

Tcl Parameter: N33NnefLpiPpValidStartTime_1_1

Tcl Parameter: N33NnefLpiPpValidStartTimeRel_1_1

Valid End Time

Select valid end time and enter either the End time in UTC format or the relative End time in seconds.

Select End Time in RF 3339 in UTC format.

Select Relative End Time and enter the time in seconds.

Range : 1 to 999999

Default : 1

For Data 1 table, tcl variable ends with 0. For Data 2 table, it ends with is 1.

Tcl Parameter: N33NnefLpiPpValidEndTimeEn_1_0

Tcl Parameter: N33NnefLpiPpValidEnd_1_0

Tcl Parameter: N33NnefLpiPpValidEndTime_1_0

Tcl Parameter: N33NnefLpiPpValidEndTimeRel_1_0

Tcl Parameter: N33NnefLpiPpValidEndTimeEn_1_1

Tcl Parameter: N33NnefLpiPpValidEnd_1_1

Tcl Parameter: N33NnefLpiPpValidEndTime_1_1

Tcl Parameter: N33NnefLpiPpValidEndTimeRel_1_1