SUA Tab


The SUA tab is used by A1p interface between the BSC and MSCe.

Parameters:

SUA

 

 

Related Measurements

Measurements collected for A1p interface in CDMA Voice Nodal and CDMA MSC3 Node are reported on the SUA, MM, and CC report tabs.


Subsystem Number

Defines the application value for the SUA messages.

Range: 0 to 255

Default: 252 (SUA)

SuaSsn

Point Code Format

The point code is an identifier for a node that can be represented in different formats. Use the radio buttons to select the point code format required by the SUT. Existing values in the Originating Point Code and Destination Point Code fields are converted when you change the format.

When you change/select different formats, the current value is converted to decimal value and then converted to the new format.

Options:


Originating Point Code

The point code for an RNC, displayed in the Point Code Format that you chose. If you are using multiple RNCs, this value is incremented for each RNC.

Range: 016383 (decimal)

Default: 0

Tcl Parameter:

SuaPcView

SuaOPc

 


 

Destination Point Code

The point code for the SGSN SUT, displayed in the Point Code Format that you chose.

Range: 016383 (decimal)

Default: 0

Tcl Parameter:

SuaDPc

 


 

Network Indicator

Use the drop-down list to select the network value for the Sub-Service field.

Options: National (2), International (0), or National Backup (1)

Default: International

Tcl Parameter:

SuaNetworkInd


Heartbeat Interval

Enter a heartbeat interval value in seconds.

Range: 0 to 65535

Default: 30

Tcl Parameter:

SuaHeartbeatInterval

Number of Retries (SUA)

The number of times a message will be re-transmitted when the Retry Time expires.

Range: 1 — 10

Default: 5

Tcl Parameter:

SuaNumRetries

 


 

Retry Time (SUA)

The number of milliseconds that the test will wait for a response before re-transmitting a message.

Range: 100 — 30000

Default: 2000

Tcl Parameter:

SuaRetryTime

 


 

Starting Routing Context (SUA)

The index value associated with an association's Routing Key. The value that you enter will be incremented for each SCTP association.

Range: 1 — 4294967295

Default: 1

Tcl Parameter:

SuaStartRouteContext

 


 

Fixed Peer Routing Context (SUA)

Indicates a fixed index value attributed to an association's routing key.

A zero value indicates no Fixed Peer Routing Context.

A > 0 indicates that the RNC will only accept ASP-Active messages from the peer with the same Routing Context as provisioned.

Note that .

Range: 1 — 4294967295

Default: 0

Tcl Parameter:

SuaStartPeerRouteContext

 

^ Back to Top