The values on the MM tab report the control plane processing measurements for the MM layer in a HNB test case, MSC test case and CDMA Voice test case and CDMA MSC3 test case.
In the default view, the Reports tab displays the Summary view, which summarizes the measurements for the test session. If your test includes multiple test cases, you can view the report for a single test case by changing the report view...
Unless otherwise noted, cumulative values report the number of occurrences or rates calculated since the start of the test, and per-interval values report the number of occurrences or rates calculated during the interval. You can view either by changing the measurement values...
Elapsed Time is the first measurement on every tab. It reports the amount of time between the start of the test and the end of the report interval.
Test Iteration reports the current iteration in a repeating test session. It is only displayed when a Number of Iterations is defined for the test session.
The following measurements record the messages exchanged between the MN and the SGSN during attach and detach procedures.
LAU Requests — The number of Location Area Update Request messages sent to the SGSN, initiating a routing area update procedure.
LAU Accepts — The number of Location Area Update Accept messages received from the SGSN, indicating that the update was accepted and processed.
LAU Rejects — The number of Location Area Update Reject messages received from the SGSN, indicating that the update was rejected due to one of the errors listed below.
ID Requests — The number of Identity Request messages received from the SGSN.
ID Responses — The number of Identity Response messages sent to the SGSN.
Authentication Requests — The number of Authentication/Ciphering Request messages received from the SGSN.
Authentication Responses — The number of Authentication/Ciphering Response messages sent to the SGSN.
Authentication Rejects — The number of Authentication/Ciphering Reject messages sent to the SGSN.
TMSI Reallocation Command — The number of TMSI Reallocation Command messages received from the SGSN, containing a new TMSI, an RAI, and possibly a new TMSI Signature.
TMSI Reallocation Complete — The number of TMSI Reallocation Complete messages sent to the SGSN, acknowledging the receipt and processing of a TMSI Reallocation Command message.
Average Periodic RAU Time — The average time required to perform a periodic Routing Area Update, measured from the time the RAU Request is sent until the RAU Accept message is received.
CM Service Requests — The number of CM Service Request messages received from the SGSN.
CM Service Responses — The number of CM Service Response messages sent to the SGSN.
CM Service Rejects — The number of CM Service Reject messages sent to the SGSN.
IMSI Detach Indications — The number of IMSI detach indications.
IMSI Unknown In HLR (2) — The MN's IMSI is not registered in the HLR.
Illegal MS (3) — The MN's identity is not acceptable or the MN failed authentication.
Illegal ME (6) — The MN's ME is banned from the network.
PLMN Not Allowed (11) — The MN requested a location update from a PLMN in which it is not allowed to operate.
Location Area Not Allowed (12) — The MN requested a location update from a location area in which it is not allowed to operate.
Roaming Not Allowed in Location Area (13) — The MN requested a location update from a location area in a PLMN that offers roaming service only by subscription.
No Suitable Cells in Location Area (15) — The MN requests a location update from a location area in which it is not allowed to operate and should find another, allowed location area in the PLMN.
MSC Temporarily Not Reachable (16) — The MN requested a combined attach or routing area update in a PLMN where the MSC is temporarily not reachable from the GPRS part of the network.
Network Failures (17) — The MSC is unable to service the request due to a failure in the PLMN.
MAC Failures (20) — The MAC received in an Authentication Request was not correct.
Sync Failures (21) — The sequence number received in an Authentication Request was out of range.
Congestions (22) — The service request cannot be handled due to congestion.
GSM Authentication Unacceptable (23) — The Authentication Parameter IE was missing from an Authentication Request.
Not Authorized for this CSG — Not authorized for this CSG.
Service Option not Supported — The service option is not supported.
Requested Service Option not Supported — The requested service option is not supported.
Service Option Temporarily Out Of Order — The service option is temporarily out of order.
Call Cannot be Identified — The call cannot be identified.
Cell Entry Retries — The location area update could not be performed because the MN entered a new cell or an update cannot be performed until the MN enters a new cell.
Semantically Incorrect Messages (95) — The SGSN received a message with semantically incorrect contents.
Invalid Mandatory Information (96) — The SGSN received a message with a semantically correct but invalid mandatory information element.
NonExistent/UnImplemented Message Type (97) — The SGSN received a message with an unidentified message type or with a message type that the SGSN does not support.
Incompatible Message Type with Protocol State (98) — The SGSN received a message that was not compatible with the MM state.
NonExistent/UnImplemented Info Element (99) — The SGSN received a message with an unidentified information element or with an information element that the SGSN does not support, but the information element is not required in order to correctly process the message.
Conditional Errors (100) — The SGSN received a message with a missing or unexpected conditional information element.
Incompatible Message with Protocol State (101) — The SGSN received a message that was not compatible with the MM state or received a Status message with an incompatible call state.
Protocol Error Unspecified (111) — A protocol event error occurred that could was not covered under another cause value.
Location Update Requests — The number of Location update Requests (available in CDMA Voice Nodal and CDMA MSCe Node).
Location Update Accepts — The number of Location update Accepts (available in CDMA Voice Nodal and CDMA MSCe Node).
Location Update Rejects — The number of Location update Rejects (available in CDMA Voice Nodal and CDMA MSCe Node).
Feature Notifications — The number of Feature Notifications (available in CDMA Voice Nodal and CDMA MSCe Node).
Feature Notification Acks — The number of Feature Notification Acks (available in CDMA Voice Nodal and CDMA MSCe Node).
SSD Update Requests — The number of SSD update Requests (available in CDMA Voice Nodal and CDMA MSCe Node).
SSD Update Responses — The number of SSD update Responses (available in CDMA Voice Nodal and CDMA MSCe Node).
BS Challenge Requests — The number of BS challenge Requests (available in CDMA Voice Nodal and CDMA MSCe Node).
BS Challenge Responses — The number of BS challenge Responses (available in CDMA Voice Nodal and CDMA MSCe Node).
Authentication Requests — The number of Authentication Requests (available in CDMA Voice Nodal and CDMA MSCe Node).
Authentication Responses — The number of Authentication Responses (available in CDMA Voice Nodal and CDMA MSCe Node).
Privacy Mode Commands — The number of Privacy mode commands (available in CDMA Voice Nodal and CDMA MSCe Node).
Privacy Mode Completes — The number of Privacy mode completes (available in CDMA Voice Nodal and CDMA MSCe Node).
Parameter Update Requests — The number of Parameter update Requests (available in CDMA Voice Nodal and CDMA MSCe Node).
Parameter Update Responses — The number of Parameter update Responses (available in CDMA Voice Nodal and CDMA MSCe Node).