Landslide emulates MSC node and provides a configuration to test the SGs Interface in SMS Network test case.
|
Enter Phys location Tcl Parameter: SgsNodeAddr |
|
|
Multi-Homed |
Select to indicate that SCTP endpoint is multi-homed, where more than one destination transport address is used to reach the endpoint. When Multi-Homed is selected, an additional IP address will be used for the multi-home secondary IP. The IP address is defined as the Starting IP address incremented by one. Tcl Parameter: SgsSctpMultiHomedMultiSrcEn |
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.
1 Maximum rates, number of sessions, and number of emulated nodes vary depending on the test configuration and the test system's licensed capacity.