In MSC Node test case, the SGd interface allows testing of the MME SUT and the emulated SGd MSC Node.
MSISDN: Enter the address of the MSC. Default: 17962490141
Tcl Parameter: SgdMscNodeMsIsdn
Tcl Parameter: SgdMscNodeAddr
Host: Depending on whether the node emulates originating or destination point, Host identifies the endpoint that originated the Diameter message or the Diameter Identity of the destination host. Default: MSC.Spirent.com
Tcl Parameter: SgdMscNodeHost
Realm: Depending on whether the node emulates originating or destination point, Realm identifies the realm of the originator of any Diameter message or the realm the message is to be routed to. Default: Spirent.com
Tcl Parameter: SgdMscNodeRealm
SC MSISDN: Enter the address of the SC MSC. Default: 17962490141
Tcl Parameter: SgdMscNodeScMsIsdn
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.
1 Maximum rates, number of sessions, and number of emulated nodes vary depending on the test configuration and the test system's licensed capacity.