In HSS Nodal test case, the HSS interface allows testing of the HSS (HSS SUT) and the emulated S-CSCF Node.
In IMS Nodal Test Case, the ISC Interface allows testing of the AS (Application Server) SUT and the emulated S-CSCF Node.
In DRA Nodal Test Case, the Cx Interface allows testing of the CSCF (Call Session Control Function) SUT and the emulated S-CSCF Node.
In IMS Node , the Cx interface allows testing of Cx SUT (HSS).
Multi-Homed: Select to indicate that SCTP endpoint is multi-homed, where more than one destination transport address is used to reach the endpoint.
Tcl Parameter: HssCxScscfClnSctpMultiHomedEn
Host: Depending on whether the node emulates originating or destination point, Host identifies the endpoint that originated the Diameter message or the Diameter Identity of the destination host.
Port: Enter Port.
Tcl Parameter: ScscfNodeHost
UTRAN Cell ID: Enter UTRAN Cell ID.
Tcl Parameter: ScscfNodeUtranCellId
Visited Network ID: Enter Network ID.
Tcl Parameter: ScscfNodeVisitedNtwId
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.