In PSAP Node test case, the Mm Interface is between PSAP and IBCF SUT. PSAP receives emergency calls on this interface and is responsible for processing these calls. PSAP RTP Traffic Node allows you to specify a different IP for RTP Traffic.
Use Separate IP Addresses for RTP Traffic: Select to use a different IP address for RTP Traffic. The Physical Interface becomes available for input.
Tcl Parameter: RtpIpAddressEn
Tcl Parameter: PsapRtpNodeAddr
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.