In PSAP Node test case, the E2 Interface is between PSAP and GMLC SUT E2. PSAP uses this interface for querying intermediate / final location of a mobile subscriber.
Tcl Parameter: PsapE2NodeAddr
ESME ID: Enter the Emergency Service Message Entity Identifier which identifies an ESME originating a query. Enter up to 15 alpha/numeric string (max = 15 octets) characters.
Default : psap-e2
Tcl Parameter: PsapE2NodeEsmeId
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.