Landslide emulates P-CSCF Node and provides a configuration to test the IMS Nodal/Node. The IMS Node test case supports SIP Endpoints and Proxy modes to test VoLTE functionality.
The emulated P-CSCF is available only when you select P-CSCF Mode as SIP Endpoint or Proxy on the IMS Node Emulator Configuration tab.
The emulated P-CSCF is available when you select PS Domain (Mw interface) on the IMS Nodal Test Configuration tab.
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Next Hop IP Address: Instead of using the test server's default route, you can force the traffic through a specific test port or set the emulator's next hop to a physical device in the test network. When you select this option, enter the IP address for the next hop in the adjacent field.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.