Le Client Node

In PSAP Node test case, the Le Interface is between PSAP and GMLC SUT Le. PSAP uses this interface for querying intermediate / final location of a mobile subscriber.

Learn more about emulators
Network Devices Tab Parameters

Tcl Parameter: LeClnNodeAddr

Host: Enter Host. Default : LeClient.Spirent.com
Tcl Parameter: LeClnNodeHost
Port: Enter Port. Default: 5060
Tcl Parameter: LeClnNodePort

Ethernet Configuration

With an Ethernet User Node, you can define:

The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.