For internal testing purposes.
The HAAP (Hybrid Access Aggregation Point) chassis selects a line-card with the lowest utilization to process the HA tunnel setup request. If there is more than one line-card that has lowest utilization, the HAAP selects a line-card between these line-cards randomly.
After the line-card is selected, the HAAP responds to the tunnel setup request with the corresponding T3 IP address as the source IP address of the GRE (each line-card has a corresponding T3 IP address).
| NOTE: GRE tunnel control messages and data traffic are using T3 IP address as the source/destination IP address of the GRE. |
No. of Line Cards: Indicates the number of HAAP Line Cards in the HAAP Chassis.
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address (IPv4 or IPv6) will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.