In IMS Nodal test case, the Generic interface allows you to configure testing of a Generic IMS Interface. GEN Interface allows you to create the reference Points.
Tcl Parameter: SipGenAddr
Host: Depending on whether the node emulates originating or destination point, Host identifies the endpoint that originated the Diameter message or the Diameter Identity of the destination host. Default : GEN.Spirent.com
Tcl Parameter: GenNodeHost
Port: Enter Port. Default: 5060
Tcl Parameter: GenNodePort
UTRAN Cell ID: Enter UTRAN Cell ID. Default: 234151D0FCE11
Tcl Parameter: GenNodeUtranCellId
Visited Network ID: Enter Network ID. Default: Visited Network Number 1
Tcl Parameter: GenNodeVisitedNtwId
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.