In the Femtocell test case you can define multiple Femtocell nodes that will attempt to establish connections with the Femtocell Gateway (FGW).
Activate Rate (Femtocell/sec) — Enter the rate at which the test attempts to activate Femtocells and connect to the FNG via the RP interface.
Deactivate (Femtocell/sec) — Enter the rate at which the test attempts to deactivate Femtocells and detach from the FNG.
Range: .0010 — 200.0
Default: 1.0
With an Ethernet User Node, you can define:
Enter the # of Nodes that will attempt to establish connections with the PCF SUT.
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.
1 Maximum rates, number of sessions, and number of emulated nodes vary depending on the test application and the test system's licensed capacity.