In eMBMS Nodal test case, the eNodeB M1 Node simulates one or more eNodeBs that connects via M1 interface. You can specify number of eNodeBs per MME to indicate support of multiple eNodeBs per MME.
Enter Num of eNodeBs Per MME to determine the total number of eNodeB User Nodes.
Range: 1 - 1000
Default: 1
Tcl Parameter: NumEnbPerMMe
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.
1 Maximum rates, number of sessions, and number of emulated nodes vary depending on the test configuration and the test system's licensed capacity.