In the ASN Nodal Test Case, you can define multiple Base Station nodes that will attempt to establish connections with the WAC SUT. When you select a Mobile Node Mobility or Session Loading With Mobility test activity, you can define a second set of nodes that will be utilized as the handoff targets.
Define the following:
| BS ID |
The hexadecimal, 48-bit unique identifier that is incremented for every BS. Range: up to 12 hexadecimal characters (excluding "0x") Default: 0x The step value used to formulate new identifiers with BS ID Increment Value. Range: 1 — 65535 Default: 256 |
| Paging Group ID |
With an Ethernet User Node, you can define:
Enter the # of Nodes that will attempt to establish connections with the WAC SUT.
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.
1 Maximum rates, number of sessions, and number of emulated nodes vary depending on the test application and the test system's licensed capacity.