BSC A1p Node

Landslide emulates BSC (Ap1) node and provides a configuration to test the MSCe SUT. In CDMA Voice Nodal test case, the A1p interface allows testing of the MSCe SUT and the emulated BSC Node.

Act Rate (s)

Enter the activation rate for BSC A1p Node. Range: 0.01 to 3000.0 Default: 1.0 Tcl Parameter: BscAttachRate

Deact Rate (s)

Enter the Deactivation rate for BSC A1p Node.

Range: 0.01 to 3000.0

Default: 1.0 Tcl Parameter: BscDetachRate

BSC A1p Node

Enter the IP Address for BSC A1p Node.

Tcl Parameter: BscA1pNodeAddr

With an Ethernet User Node, you can define:

The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.

1 Maximum rates, number of sessions, and number of emulated nodes vary depending on the test configuration and the test system's licensed capacity.