In IMS Nodal test case, the Mx interface allows testing of the IBCF Mx. Mx Interface is the reference Point between a CSCF/BGCF and IBCF.
Tcl Parameter: BgcfMxNodeAddr
Host: Depending on whether the node emulates originating or destination point, Host identifies the endpoint that originated the Diameter message or the Diameter Identity of the destination host.
Tcl Parameter: BgcfMxNodeHost
Port: Enter Port.
Tcl Parameter: BgcfMxNodePort
UTRAN Cell ID: Enter UTRAN Cell ID.
Tcl Parameter: BgcfMxNodeUtranCellId
Visited Network ID: Enter Network ID.
Tcl Parameter: BgcfMxNodeVisitedNtwId
With an Ethernet User Node, you can define:
The IP address and routing options... The IP Address will increment for each node.
The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.
Custom port selection... and error injection with the Advanced... button.
Select default routing that were configured for the test server.
Select the Next Hop IP Address instead of using the test server's default route.
The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.