The S102 interface tab is the reference point between the MME and the 1xCS IWS, which supports CS fallback in EPS function. The S102 reference point provides a tunnel between MME and 3GPP2 1xCS IWS to relay 3GPP2 1xCS signalling messages (1x CS signalling messages are those messages that are defined for A21 interface).
The S102 tab is available in MME Nodal Test Case when Test Activity is Inter-Technology Mobility and Handoff protocol is 1xRTT on the MME Nodal Test Configuration tab. In MME Node test case, the S102 tab is available when you select S102 Interface on the MME Node Emulator Configuration tab.
The S102 messages support interworking and CS fallback to 1x RTT procedures between MME and 1xCS IWS.
Node Settings
|
|
|
|
Measurements collected for S102 Session related processing are reported on the S102 Session measurement tab.
Indicates the proprietary mechanism available when you select Vendor Variant 2 on MME Nodal Test Configuration and MME Node Emulator Configuration tabs.
|
|||||
|
NOTE: This timer is started when the MME or 1xCS IWS sends an A21-1x Air interface signalling message or a A21 Event Notification message and is stopped when the corresponding A21-Ack message is received from the peer 1xCS IWS or MME. |