Pc3Pc8 APP Configuration


Pc3Pc8 APP Client tab is used in MME nodal when PC3/PC8/Ub Interface is enabled.

 

Traffic Pattern

 

 

 

 

User Identities

 

 

 

 

 

 

Related Measurements

Measurements collected on MME Nodal PC3 PC8 Client|1xx, PC3 PC8 |2xx, PC3 PC8 |3xx, PC3 PC8 |4xx, PC3 PC8 |5xx report tabs. Measurements collected on MME Nodal Ub Client Main|1xx, Ub|2xx, Ub|3xx, Ub|4xx, Ub|5xx report tabs.


PC3 Pc8 APP Settings

Local Port

Local Server port for PC3 PC8 XCAP Client.

Range 0 to 65535

Default = 2000

Tcl Parameter: Pc3Pc8ClnPort

APN

Enter APN.

Default: APN 0

Tcl Parameter: Pc3Pc8ClnApn

Traffic Pattern

Select the Traffic Pattern.
Traffic Start

Select "When All Sessions Established" (default) or "When Session Established".

Tcl Parameter: Pc3Pc8ClnStart

Start Delay (s)

Enter Start delay in seconds.

Range: 0 to 65535

Default: 5

Tcl Parameter: Pc3Pc8ClnStartDelay

 

Public User Name

User Identities configuration is only enabled when VoLTE is NOT enabled. Otherwise, the User Identities from the Phonebook Tab are used.

Public User Name for XCAP Client server. Only one User Name is required and it is not configured to any service bearers.

Range : Up to 128 Char.

Default = public#(N0)

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: Pc3Pc8ClnPublicUserName

Private User Name

User Identities configuration is only enabled when VoLTE is NOT enabled. Otherwise, the User Identities from the Phonebook Tab are used.

Private User Name for XCAP Client server. Only one User Name is required and it is not configured to any service bearers.

NOTE: The default value displayed depends on whether you select Decimal or Hexadecimal in the Parameter Auto-increment Wizard window.

Default: private#(N0)

Tcl Parameter: Pc3Pc8ClnPrivateUserName

Password

User Identities configuration is only enabled when VoLTE is NOT enabled. Otherwise, the User Identities from the Phonebook Tab are used.

Password for XCAP Client server. Only one Password is required and it is not configured to any service bearers.

Range : Up to 128 Char.

Default = password#(N0)

Click to use the Auto-Increment Format Wizard.

Tcl Parameter: Pc3Pc8ClnPassword