Nsmf NF Tab
The Nsmf NF (Session and Mobility Network Function) Producer tab is available when SMF is selected on Service Based Node Emulator Configuration . About the 5G Application.
Per 3GPP TS 23.501, 23.502 release 16.6.0 (2020-12).
Related Measurements
Measurements collected for Service Based Node related processing are reported on the Nsmf Producer report tab.
|
|
|
|
PduSessionCreatedData |
PduSessionCreateError
|
|
HsmfUpdatedData
|
HsmfUpdateError |
|
ReleasedData |
ReleaseData |
|
VsmfUpdateData |
VsmfUpdateData |
|
StatusNotification |
StatusNotification |
|
TransferMtDataReqData |
NF Producer
The Nsmf NF (Session and Mobility Network Function) Producer tab is available when SMF is selected on Service Based Node Emulator Configuration .
|
Select the Nsmf Version. Options: 16.6.0/Dec2020 Tcl Parameter: NsmfSbiVersion |
|
|
Enter up to 11 Protocol Data Unit (PDU) Sessions. Tcl Parameter: NsmfPduSessionNum |
PduSessionCreatedData
| PDU Session Type |
Select the Protocol Data Unit (PDU) Type ID for the PduSessionCreatedData message. Options : IPv4 , IPv6 , IPv4v6 , Unstructured , Ethernet Default : IPv4 Tcl Parameter: NsmfPduCreatedSessType |
|
SSC Mode |
Enter the SSC Mode for the PduSessionCreatedData message. Range : 1 to 3 Default : 1 Tcl Parameter: NsmfPduCreatedSscMode |
|
Session AMBR |
Select to enter the Session AMBR for Uplink and Downlink for the PduSessionCreatedData message. Enter the Uplink and select bps. Enter the Downlink and select bps. Range : 0 to 65535 , Default : 1 Options: bps, Kbps, Mbps, Gbps, Tbps Default : Mbps Tcl Parameter: NsmfPduCreatedSessAmbrEn Tcl Parameter: NsmfPduCreatedSessAmbrUlRate Tcl Parameter: NsmfPduCreatedSessAmbrUlUnit Tcl Parameter: NsmfPduCreatedSessAmbrDlRate Tcl Parameter: NsmfPduCreatedSessAmbrDlUnit |
| UE IPv4 Address |
Select to include the UE IPv4 Address in the PduSessionCreatedData message. Enter valid IPv4 address. Default : 1.1.1.1 Tcl Parameter: NsmfPduCreatedUeIpv4AddrEn Tcl Parameter: NsmfPduCreatedUeIpv4Addr |
| UE IPv6 Prefix |
Select to include the UE IPv6 Prefix in the PduSessionCreatedData message. Enter valid IPv6 prefix. Default : 1::1/64 Tcl Parameter: NsmfPduCreatedUeIpv6PrefixEn Tcl Parameter: NsmfPduCreatedUeIpv6Prefix |
|
S-NSSAI SST SD |
Select S-NSSAI to enter the SST (Slice / Service Type and Sd (Slice Differentiator) for the PduSessionCreatedData message. SST : Range: 0 to 255 Default: 1 SD : Range: Hex-string , 1 to 6 Hex characters Default: 0 Tcl Parameter: NsmfPduCreatedSnssaiEn Tcl Parameter: NsmfPduCreatedSnssai |
|
HCN Tunnel Info
V4 Address V6 Address GTP TEID Access Type |
Select to enter the HCN (Home Cloud Network) Tunnel Info for the PduSessionCreatedData message.
Select to enter a valid V4 IP Address. Select to enter a valid V6 IP Address.
Enter the GTP TEID (Tunnel Endpoint ID). Range : 0 to 4294967295 Default : 0
Select the Access Type for the HCN (Home Cloud Network) Tunnel Info PduSessionCreatedData message. Options: 3GPP_ACCESS (default), NON_3GPP_ACCESS Tcl Parameter: NsmfPduCreatedHcnEn Tcl Parameter: NsmfPduCreatedHcnV4AddrEn Tcl Parameter: NsmfPduCreatedHcnV4Addr Tcl Parameter: NsmfPduCreatedHcnV6AddrEn Tcl Parameter: NsmfPduCreatedHcnV6Addr Tcl Parameter: NsmfPduCreatedHcnGtpTeid Tcl Parameter: NsmfPduCreatedHcnAnTypeEn Tcl Parameter: NsmfPduCreatedHcnAnType |
|
N1 SM Information from UE |
Select to enter N1 SM Information from UE for the PduSessionCreatedData message. Range : 1 to 2048 Default : 00
Tcl Parameter: NsmfPduCreatedN1SmInfoEn Tcl Parameter: NsmfPduCreatedN1SmInfo |
PduSessionCreateError
| N1 SM Cause |
Select to enter the N1 SM Cause for PduSessionCreateError message. Rnage : 2 hex chars Default : 00 Tcl Parameter: NsmfPduCreateErrN1smCauseEn Tcl Parameter: NsmfPduCreateErrN1smCause |
|
N1 SM Information To UE |
Select to enter N1 SM Information To UE for the PduSessionCreateError message. Range : 1 to 2048 Default : 00
Tcl Parameter: NsmfPduCreateErrN1SmInfoToUeEn Tcl Parameter: NsmfPduCreateErrN1SmInfoToUe |
HsmfUpdatedData
|
N1 SM Information To UE |
Select to enter N1 SM Information To UE for the HsmfUpdatedData message. Range : 1 to 2048 Default : 00
Tcl Parameter: NsmfHsmfUpdN1SmInfoToUeEn Tcl Parameter: NsmfHsmfUpdN1SmInfoToUe |
| DNAI List |
Select to enter DNAI (Data Network Access Identifier) List for the HsmfUpdatedData message. Enter # of DNAI Lists. Range : 1 to 4 Default : 1
Enter DNAI ((Data Network Access Identifier) Range : max 256 characters Tcl Parameter: NsmfHsmfUpdDnaiListEn Tcl Parameter: NsmfHsmfUpdDnaiNum Tcl Parameter: NsmfHsmfUpdDnai_1 |
HsmfUpdateError
| N1 SM Cause |
Select to enter the N1 SM Cause for HsmfUpdateError message. Rnage : 2 hex chars Default : 00 Tcl Parameter: NsmfHsmfUpdErrN1smCauseEn Tcl Parameter: NsmfHsmfUpdErrN1smCause |
|
N1 SM Information To UE |
Select to enter N1 SM Information To UE for the HsmfUpdateError message. Range : 1 to 2048 Default : 00
Tcl Parameter: NsmfHsmfUpdErrN1SmInfoToUeEn Tcl Parameter: NsmfHsmfUpdErrN1SmInfoToUe |
ReleasedData
|
Small Data Rate Status
Uplink / Downlink Packets Remaining
Uplink / Downlink Exception Reports Remaining
Validity Time Timestamp Relative Time (s) |
Select to include the Small Data Rate Status in the ReleasedData message. Select to include the Uplink and Downlink Packets Remaining in the Small Data Rate Status of the ReleasedData message. Range : 0 to 4294967295 Default : 0 Select to include the Uplink and Downlink Exception Reports Remaining in the Small Data Rate Status of the ReleasedData message. Range : 0 to 4294967295 Default : 0 Select to include the Validity Time and Timestamp or Relative Time (s) in the Small Data Rate Status of the ReleasedData message. Select Timestamp per RFC 3339 Format. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.
Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select Relative Time and enter a value in seconds. Range : 10 to 999999 Default : 10 Tcl Parameter: NsmfRelSmallDataRsEn Tcl Parameter: NsmfRelSmallDataRsRePktsUl Tcl Parameter: NsmfRelSmallDataRsRePktsDl Tcl Parameter: NsmfRelSmallDataRsReExRptsUl Tcl Parameter: NsmfRelSmallDataRsReExRptsDl Tcl Parameter: NsmfRelSmallDataRsValidTimeEn Tcl Parameter: NsmfRelSmallDataRsValidTime Tcl Parameter: NsmfRelSmallDataRsRelValidTime |
|
APN Rate Status
Uplink / Downlink Packets Remaining
Uplink / Downlink Exception Reports Remaining
Validity Time Timestamp Relative Time (s) |
Select to include the APN Rate Status in the ReleasedData message. Access Point Name (APN). Select to include the Uplink and Downlink Packets Remaining in the APN Rate Status of the ReleasedData message. Range : 0 to 4294967295 Default : 0 Select to include the Uplink and Downlink Exception Reports Remaining in the APN Rate Status of the ReleasedData message. Range : 0 to 4294967295 Default : 0 Select to include the Validity Time and Timestamp or Relative Time (s) in the APN Rate Status of the ReleasedData message. Select Timestamp per RFC 3339 Format. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.
Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select Relative Time and enter a value in seconds. Range : 10 to 999999 Default : 10 Tcl Parameter: NsmfRelApnRsEn Tcl Parameter: NsmfRelApnRsRePktsUl Tcl Parameter: NsmfRelApnRsRePktsDl Tcl Parameter: NsmfRelApnRsReExRptsUl Tcl Parameter: NsmfRelApnRsReExRptsDl Tcl Parameter: NsmfRelApnRsValidTimeEn Tcl Parameter: NsmfRelApnRsValidTime Tcl Parameter: NsmfRelApnRsRelValidTime |
VsmfUpdatedData
| Request Indication |
Select the Request indication for VsmfUpdateData Message. Options : UE_REQ_PDU_SES_MOD, UE_REQ_PDU_SES_REL, PDU_SES_MOB, NW_REQ_PDU_SES_AUTH, NW_REQ_PDU_SES_MOD, NW_REQ_PDU_SES_REL, EBI_ASSIGNMENT_REQ, REL_DUE_TO_5G_AN_REQUEST Default : UE_REQ_PDU_SES_MOD Tcl Parameter: NsmfVsmfUpdReqInd |
| Cause |
Select to include the Cause code in the VsmfUpdateData message. Options : REL_DUE_TO_HO, EPS_FALLBACK, REL_DUE_TO_UP_SEC, DNN_CONGESTION, S_NSSAI_CONGESTION, REL_DUE_TO_REACTIVATION, 5G_AN_NOT_RESPONDING, REL_DUE_TO_SLICE_NOT_AVAILABLE, REL_DUE_TO_DUPLICATE_SESSION_ID, PDU_SESSION_STATUS_MISMATCH, HO_FAILURE, INSUFFICIENT_UP_RESOURCES, PDU_SESSION_HANDED_OVER, PDU_SESSION_RESUMED, CN_ASSISTED_RAN_PARAMETER_TUNING, ISMF_ CONTEXT_TRANSFER, SMF_ CONTEXT_TRANSFER, REL_DUE_TO_PS_TO_CS_HO, REL_DUE_TO_SUBSCRIPTION_CHANGE, HO_CANCEL, REL_DUE_TO_SLICE_NOT_AUTHORIZED, PDU_SESSION_HAND_OVER_FAILURE, DDN_FAILURE_STATUS, REL_DUE_TO_CP_ONLY_NOT_APPLICABLE, NOT_SUPPORTED_WITH_ISMF Default : REL_DUE_TO_HO Tcl Parameter: NsmfVsmfUpdCauseEn Tcl Parameter: NsmfVsmfUpdCause |
|
Session AMBR |
Select to enter the Session AMBR for Uplink and Downlink for the VsmfUpdateData message. Enter the Uplink and select bps. Enter the Downlink and select bps. Range : 0 to 65535 , Default : 1 Options: bps, Kbps, Mbps, Gbps, Tbps Default : Mbps Tcl Parameter: NsmfVsmfUpdSessAmbrEn Tcl Parameter: NsmfVsmfUpdSessAmbrUlRate Tcl Parameter: NsmfVsmfUpdSessAmbrUlUnit Tcl Parameter: NsmfVsmfUpdSessAmbrDlRate Tcl Parameter: NsmfVsmfUpdSessAmbrDlUnit |
| DNAI List |
Select to enter DNAI (Data Network Access Identifier) List for the VsmfUpdateData message. Enter # of DNAI Lists. Range : 1 to 4 Default : 1
Enter DNAI ((Data Network Access Identifier) Range : max 256 characters Tcl Parameter: NsmfVsmfUpdDnaiListEn Tcl Parameter: NsmfVsmfUpdDnaiNum Tcl Parameter: NsmfVsmfUpdDnai_1 |
| N1 SM Cause |
Select to enter the N1 SM Cause for VsmfUpdateData message. Rnage : 2 hex chars Default : 00 Tcl Parameter: NsmfVsmfUpdN1smCauseEn Tcl Parameter: NsmfVsmfUpdN1smCause |
|
N1 SM Information To UE |
Select to enter N1 SM Information To UE for the VsmfUpdateData message. Range : 1 to 2048 Default : 00 Tcl Parameter: NsmfVsmfUpdN1SmInfoToUeEn Tcl Parameter: NsmfVsmfUpdN1SmInfoToUe |
|
QosFlowsAddModRequestList
Number of Items QFI QoS Rules QoS Flow Description |
Select to include the QoSFlowsAddModRequestList in the VsmfUpdateData message. Select the Number of Items. Range : 1 to 4 Default : 1 Include the QFI code in the QoSFlowsAddModRequestList. Range : 0 to 63 Default : 0 Select to include the QoS Profile Index in the QoSFlowsAddModRequestList. Range : hex beginning with 0x Default : 0x00 Select to include the QoS Flow Description in the QoSFlowsAddModRequestList. Range : hex beginning with 0x Default : 0x00 Tcl Parameter: NsmfVsmfUpdQfAddModReqEn Tcl Parameter: NsmfVsmfUpdQfAddModReqNum Tcl Parameter: NsmfVsmfUpdQfAddModReqQfi_1 Tcl Parameter: NsmfVsmfUpdQfAddModReqRulesEn_1 Tcl Parameter: NsmfVsmfUpdQfAddModReqRules_1 Tcl Parameter: NsmfVsmfUpdQfAddModReqDescEn_1 Tcl Parameter: NsmfVsmfUpdQfAddModReqDesc_1 |
|
QosFlowsRelRequestList
Number of Items QFI QoS Rules QoS Flow Description |
Select to include the QoSFlowsRelRequestList in the VsmfUpdateData message. Select the Number of Items. Range : 1 to 4 Default : 1 Include the QFI code in the QoSFlowsRelRequestList. Range : 0 to 63 Default : 0
Select to include the QoS Profile Index in the QoSFlowsRelRequestList. Range : hex beginning with 0x Default : 0x00 Select to include the QoS Flow Description in the QoSFlowsRelRequestList. Range : hex beginning with 0x Default : 0x00 Tcl Parameter: NsmfVsmfUpdQfRelReqEn Tcl Parameter: NsmfVsmfUpdQfRelReqNum Tcl Parameter: NsmfVsmfUpdQfRelReqQfi_1 Tcl Parameter: NsmfVsmfUpdQfRelReqRulesEn_1 Tcl Parameter: NsmfVsmfUpdQfRelReqRules_1 Tcl Parameter: NsmfVsmfUpdQfRelReqDescEn_1 Tcl Parameter: NsmfVsmfUpdQfRelReqDesc_1 |
StatusNotification
|
Status Info Resource Status Cause Access Type |
Select to include the Resource Status in the StatusNotification message. Options : RELEASED, UNCHANGED, TRANSFERRED, UPDATED Default : RELEASED Select to include the Cause code in the StatusNotification message. Options : REL_DUE_TO_HO, EPS_FALLBACK, REL_DUE_TO_UP_SEC, DNN_CONGESTION, S_NSSAI_CONGESTION, REL_DUE_TO_REACTIVATION, 5G_AN_NOT_RESPONDING, REL_DUE_TO_SLICE_NOT_AVAILABLE, REL_DUE_TO_DUPLICATE_SESSION_ID, PDU_SESSION_STATUS_MISMATCH, HO_FAILURE, INSUFFICIENT_UP_RESOURCES, PDU_SESSION_HANDED_OVER, PDU_SESSION_RESUMED, CN_ASSISTED_RAN_PARAMETER_TUNING, ISMF_ CONTEXT_TRANSFER, SMF_ CONTEXT_TRANSFER, REL_DUE_TO_PS_TO_CS_HO, REL_DUE_TO_SUBSCRIPTION_CHANGE, HO_CANCEL, REL_DUE_TO_SLICE_NOT_AUTHORIZED, PDU_SESSION_HAND_OVER_FAILURE, DDN_FAILURE_STATUS, REL_DUE_TO_CP_ONLY_NOT_APPLICABLE, NOT_SUPPORTED_WITH_ISMF Default : REL_DUE_TO_HO Select to include the Access Type code in the StatusNotification message. Options : 3GPP_ACCESS, NON_3GPP_ACCESS Default : 3GPP_ACCESS Tcl Parameter: NsmfStatusNtfResStatus Tcl Parameter: NsmfStatusNtfCauseEn Tcl Parameter: NsmfStatusNtfCause Tcl Parameter: NsmfStatusNtfAnTypeEn Tcl Parameter: NsmfStatusNtfAnType |
|
Small Data Rate Status
Uplink / Downlink Packets Remaining
Uplink / Downlink Exception Reports Remaining
Validity Time Timestamp Relative Time (s) |
Select to include the Small Data Rate Status in the StatusNotification message. Select to include the Uplink and Downlink Packets Remaining in the Small Data Rate Status of the StatusNotification message. Range : 0 to 4294967295 Default : 0 Select to include the Uplink and Downlink Exception Reports Remaining in the Small Data Rate Status of the StatusNotification message. Range : 0 to 4294967295 Default : 0 Select to include the Validity Time and Timestamp or Relative Time (s) in the Small Data Rate Status of the StatusNotification message. Select Timestamp per RFC 3339 Format. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.
Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select Relative Time and enter a value in seconds. Range : 10 to 999999 Default : 10 Tcl Parameter: NsmfStatusNtfSmallDataRsEn Tcl Parameter: NsmfStatusNtfSmallDataRsRePktsUl Tcl Parameter: NsmfStatusNtfSmallDataRsRePktsDl Tcl Parameter: NsmfStatusNtfSmallDataRsReExRptsUl Tcl Parameter: NsmfStatusNtfSmallDataRsReExRptsDl Tcl Parameter: NsmfStatusNtfSmallDataRsValidTimeEn Tcl Parameter: NsmfStatusNtfSmallDataRsValidTime Tcl Parameter: NsmfStatusNtfSmallDataRsRelValidTime |
|
APN Rate Status
Uplink / Downlink Packets Remaining
Uplink / Downlink Exception Reports Remaining
Validity Time Timestamp Relative Time (s) |
Select to include the APN Rate Status in the StatusNotification message. Access Point Name (APN). Select to include the Uplink and Downlink Packets Remaining in the APN Rate Status of the StatusNotification message. Range : 0 to 4294967295 Default : 0 Select to include the Uplink and Downlink Exception Reports Remaining in the APN Rate Status of the StatusNotification message. Range : 0 to 4294967295 Default : 0 Select to include the Validity Time and Timestamp or Relative Time (s) in the APN Rate Status of the StatusNotification message. Select Timestamp per RFC 3339 Format. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.
Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select Relative Time and enter a value in seconds. Range : 10 to 999999 Default : 10 Tcl Parameter: NsmfStatusNtfApnRsEn Tcl Parameter: NsmfStatusNtfApnRsRePktsUl Tcl Parameter: NsmfStatusNtfApnRsRePktsDl Tcl Parameter: NsmfStatusNtfApnRsReExRptsUl Tcl Parameter: NsmfStatusNtfApnRsReExRptsDl Tcl Parameter: NsmfStatusNtfApnRsValidTimeEn Tcl Parameter: NsmfStatusNtfApnRsValidTime Tcl Parameter: NsmfStatusNtfApnRsRelValidTime |
TransferMtDataReqData
| MT Data |
Enter the MT Datas in the TransferMtDataReqData message. Range : 1 to 2048 characters Default : 00 Tcl Parameter: NsmfTransMtData |
RetrievedData
|
Small Data Rate Status
Uplink / Downlink Packets Remaining
Uplink / Downlink Exception Reports Remaining
Validity Time Timestamp Relative Time (s) |
Select to include the Small Data Rate Status in the RetrievedData message. Select to include the Uplink and Downlink Packets Remaining in the Small Data Rate Status of the RetrievedData message. Range : 0 to 4294967295 Default : 0 Select to include the Uplink and Downlink Exception Reports Remaining in the Small Data Rate Status of the RetrievedData message. Range : 0 to 4294967295 Default : 0 Select to include the Validity Time and Timestamp or Relative Time (s) in the Small Data Rate Status of the RetrievedData message. Select Timestamp per RFC 3339 Format. The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.
Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options] Max of 64 characters. Select Relative Time and enter a value in seconds. Range : 10 to 999999 Default : 10 Tcl Parameter: NsmfRetrivSmallDataRsEn Tcl Parameter: NsmfRetrivSmallDataRsRePktsUl Tcl Parameter: NsmfRetrivSmallDataRsRePktsDl Tcl Parameter: NsmfRetrivSmallDataRsReExRptsUl Tcl Parameter: NsmfRetrivSmallDataRsReExRptsDl Tcl Parameter: NsmfRetrivSmallDataRsValidTimeEn Tcl Parameter: NsmfRetrivSmallDataRsValidTime Tcl Parameter: NsmfRetrivSmallDataRsRelValidTime |