Amf to Nssf NF Tab


The Amf to Nssf NF (Network Function) Consumer tab is available when Test NSSF (Nnssf), From AMF (N22) is selected on Service Based Nodal test case and when  N22 interface is enabled on AMF Node Emulator Configuration. About the 5G Application.

TS 23.501 defines Network Function, Slice, and Slice Instance as follows:

Network Function: A 3GPP adopted or 3GPP defined processing function in a network, which has defined functional behavior and 3GPP defined interfaces. (Note: A network function can be implemented either as a network element on a dedicated hardware, as a software instance running on a dedicated hardware, or as a virtualized function instantiated on an appropriate platform, e.g. on a cloud infrastructure.)

Network Slice: A logical network that provides specific network capabilities and network characteristics.

Network Slice Instance: A set of Network Function instances and the required resources (e.g. compute, storage and networking resources) which form a deployed Network Slice.

Per 3GPP TS 23.501, 23.502 and 29.5xx.

Related Measurements

Measurements collected for Service Based Nodal related processing are reported on the AMF-NSSF N22 Consumer report tab.

NF Consumer  

Service Based Nodal Parameters

Network Slice selection Request Info

Allowed NSSAI

 

 

AMF Node Parameters

 

Service Based Nodal Parameters

 

NSSAI Availability Info

Updates

 

 


NF Consumer

Available when Test NSSF (Nnssf), From AMF (N22) is selected on Service Based Nodal test case on Interface AMF-NSSF.

Nnssf Version (29.531)

Select the Nnssf Version on the Service Based Nodal test case.

 Options: 15.2.0/Dec2018 (default) , 15.4.0/Jun2019 (AMF Node)

 Tcl Parameter: N22NnssfSbiVersion

Use Access Token

Select “Use Access Token” option to support OAuth2 authorization for NF Consumer.

Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF  per spec TS 29.510 V16.3.0 section 5.4.2.2.1.

Select to enter Access Token. Enter up to 1023 characters

Tcl Parameter: N22NnssfUseAccTokEn

Tcl Parameter: N22NnssfAccTokEn

Tcl Parameter: N22NnssfAccTok

 

AMF Node Parameters (AMF-NSSF)

Network Slice Selection for Registration

Available on AMF node when N22 interface is enabled. Select to enable Network Slice Selection for Registration.

Tcl Parameter: N22NnssfNssRegEn

Network Slice Selection for PDU Session Establishment

Available on AMF node when N22 interface and NRF Interface are enabled. Select to enable Network Slice Selection for PDU Session Establishment.

Tcl Parameter: N22NnssfNssPduEn

 

Network Slice Selection Request Info

Enable Slice Info for Registration

Select Enable Slice Info for Registration to enter the Network Slice Selection Request Info. Identification of a Network Slice is done via the Single Network Slice Selection Assistance Information (S-NSSAI). The NSSAI (Network Slice Selection Assistance Information) is a collection of S-NSSAIs.  Currently 3GPP allows up to eight (8) S-NSSAIs in the NSSAI sent in signaling messages between the UE and the Network. This means a single UE may be served by at most eight Network Slices at a time. The S-NSSAI signaled by the UE to the network, assists the network in selecting a particular Network Slice instance.

When Nnssf Version (29.531) is > 15.2.0, Enable Slice Info Selection Update becomes available.

Tcl Parameter: N22NnssfNsiRegEn

Tcl Parameter: N22NnssfNsiUpEn

Number of S-NSSAIs   Subscribed NSSAI

Enter the Number of S-NSSAIs (Single - Network Slice Selection Assistance Information) for the Subscribed NSSAI. The S-NSSAI is used to uniquely identify a Network Slice.

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator). Indicate the default (y or n) S-NSSAIs.

Range : 1 to 8

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

default : N (default) or Y

Tcl Parameter: N22NnssfNumSubSnssais

Tcl Parameter: N22NnssfSubSnssai_1

S-NSSAI for Mapping

Select to Request Mapping of S-NSSAI. Enter the Number of S-NSSAIs (Single - Network Slice Selection Assistance Information) for Mapping. The S-NSSAI is used to uniquely identify a Network Slice.

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range : 1 to 8

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N22NnssfReqMapEn

Tcl Parameter: N22NnssfReqMapNumSnssais

Tcl Parameter: N22NnssfReqMapNssai_1

Requested NSSAI

Select to Enable Requested NSSAI. Enter the Number of Requested NSSAIs (Network Slice Selection Assistance Information).

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range : 1 to 8

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N22NnssfReqNssaiEn

Tcl Parameter: N22NnssfNumReqSnssais

Tcl Parameter: N22NnssfReqSnssai_1

Mapping of NSSAI

Select to Enable Mapping of NSSAI. Enter the Number of S-NSSAIs for Mapping (Network Slice Selection Assistance Information).

The S-NSSAI contains two components for the Serving S-NSSAIs and the Home S-NSSAIs : the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range : 1 to 8

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N22NnssfMapNssaiEn

Tcl Parameter: N22NnssfNumMapSnssais

Tcl Parameter: N22NnssfMapSSnssai_1

Tcl Parameter: N22NnssfMapHSnssai_1

 

Allowed NSSAI

 

Configure Allowed S-NSSAIs   Current Access

Select to Configure Allowed S-NSSAIs for current access.

Select the Access Type. Options: 3GPP_ACCESS, NON_3GPP_ACCESS

Enter the Number of Allowed S-NSSAIs (Single - Network Slice Selection Assistance Information) for the Subscribed NSSAI. The S-NSSAI is used to uniquely identify a Network Slice.

Enter the Allowed S-NSSAI. The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range : 1 to 8

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N22NnssfCurrentAllowedNssaiEn

Tcl Parameter: N22NnssfCurrentAllowedAcType

Tcl Parameter: N22NnssfCurrentAllowNumSnssais

Tcl Parameter: N22NnssfCurrentAllowSnssai_1

Number of NSI Informations   Current Access

Enter the Number of NSI Informations (Network Slice Information) for Current Access.

Enter the NRF (mandatory) and the NSI ID (optional).

Range : 0 to 4

NRF : string with uri format. (mandatory)

NSI ID : string,  (optional)

Tcl Parameter: N22NnssfCurrentAllowedNumNsiInfos_1

Tcl Parameter: N22NnssfCurrentAllowedNsiInfos_1

Configure Allowed S-NSSAIs   Other Access

Select to Configure Allowed S-NSSAIs for Other access.

Select the Access Type. Options: 3GPP_ACCESS, NON_3GPP_ACCESS

Enter the Number of Allowed S-NSSAIs (Single - Network Slice Selection Assistance Information) for the Subscribed NSSAI. The S-NSSAI is used to uniquely identify a Network Slice.

Enter the Allowed S-NSSAI. The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range : 1 to 8

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N22NnssfOtherAllowedNssaiEn

Tcl Parameter: N22NnssfOtherAllowedAcType

Tcl Parameter: N22NnssfOtherAllowNumSnssais

Tcl Parameter: N22NnssfOtherAllowSnssai_1

Number of NSI Informations   Other Access

Enter the Number of NSI Informations (Network Slice Information) for Other access.

Enter the NRF (mandatory) and the NSI ID (optional).

Range : 0 to 4

NRF : string with uri format. (mandatory)

NSI ID : string,  (optional)

Tcl Parameter: N22NnssfOtherAllowedNumNsiInfos_1

Tcl Parameter: N22NnssfOtherAllowedNsiInfo_1_1

Default Configured S-NSSAI Indication

Select Default Configured S-NSSAI Indication.

Tcl Parameter: N22NnssfDefConfSnssaiInd

Enable Slice Info for PDU Session

Select to Enable Slice Info for PDU Session.

Enter the S-NSSAI, the Home S-NSSAI and the Roaming Indication.

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Roaming Indication options: NON_ROAMING (default), LOCAL_BREAKOUT, HOME_ROUTED_ROAMING

Tcl Parameter: N22NnssfNsiPduEn

Tcl Parameter: N22NnssfPduSnssai

Tcl Parameter: N22NnssfPduHomeSnssai

Tcl Parameter: N22NnssfPduRoamInd

 

 

 

 

NSSAI Availability Info

S-NSSAI List

Enter the NSSAI Availability Info. Identification of a Network Slice is done via the Single Network Slice Selection Assistance Information (S-NSSAI). The NSSAI (Network Slice Selection Assistance Information) is a collection of S-NSSAIs.  

Number of S-NSSAIs  

Enter the Number of S-NSSAIs (Single - Network Slice Selection Assistance Information) for the NSSAI Availability Info. The S-NSSAI is used to uniquely identify a Network Slice.

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range : 1 to 16

SST : 0 up to 255

SD : hex-string, maximum length = 6 (optional)

Tcl Parameter: N22NnssfNumSnssais

Tcl Parameter: N22NnssfAvailSnssai_1

Supported Features

Select to enter the Supported Features.

Range: 1 to 8 Hex characters.

Tcl Parameter: N22NnssfSupFeatEn

Tcl Parameter: N22NnssfSupFeat

Emulate NSSF Event Subscription

Select to Emulate NSSF Event Subscription.

Enter Subscription Delay (ms).

Range : 1000 to 655350000

Select to Emulate NSSF Event Unsubscription. Becomes available when Emulate NSSF Event Subscription is enabled.

Enter Unsubscription Delay (ms).

Range : 1000 to 655350000

Tcl Parameter: N22NnssfEmuEventSubEn

Tcl Parameter: N22NnssfEmuEventSubDelay

Tcl Parameter: N22NnssfEmuEventUnsubEn

Tcl Parameter: N22NnssfEmuEventUnsubDelay

Tracking Area List

Select to enter the Tracking Area List. Enter the Number of Tracking Areas.

Enter the TAC and the Supported S-NSSAI List.

Range : 1 to 20

TAC : 1 to 16777215

Supported S-NSSAI List: Double click for The Edit Supported S-NSSAIs Window used to enter the supported S-NSSAIs.

 

Tcl Parameter: N22NnssfNumTas

Tcl Parameter: N22NnssfTac_1

Tcl Parameter: N22NnssfTaSupSnssasi_1

AMF Set List

Select to enter the AMF Set List. The number of entries in this table should be equal to the "# of Nodes" on the Target AMF SBI Node. Each Target AMF Node represents an AMF set. This table is used to configure the TA list supported by the AMF Set.

If the Target AMF SBI Nodes number > 20, the AMF Set List and Updates only show the first line or only the first line is editable, other lines can not be edited.

Enter the Tracking Area List and the Supported S-NSSAI List.

Range : 1 to 20

Tracking Area List : Double click for The Edit Tracking Area List window used to enter the Tracking Areas. The number of entries are the same as the Tracking Area List (see above).

 

Supported S-NSSAI List: Double click for The Edit Supported S-NSSAIs window used to enter the supported S-NSSAIs.

 

Tcl Parameter: N22NnssfAmfSetTaList_1

Tcl Parameter: N22NnssfAmfSetSnssaniList_1

 

Updates

Emulate NSSAI Availability Info Update

Select to Emulate NSSAI Availability Info Update.

 

Enter the Number of Updated AMF Sets. Range 1 to 20. This corresponds to the Number of entries in the AMF Set List.

If the Target AMF SBI Nodes number > 20, the AMF Set List and Updates only show the first line or only the first line is editable, other lines can not be edited.

Enter the AMF Set #, Delay (s), TA Index, Operation and Updated S-NSSAI List.

AMF Set #: Range : 1 to 20, must be unique.

Delay (s) : 1 to 65535

TA Index : 1 to <Number of TAs configured for corresponding AMF Set List - Tracking Area List>

Operation : add, replace, remove

Updated S-NSSAI List : This corresponds to the Number of entries in the S-NSSAI List. Double click for The Edit Updated S-NSSAIs window used to enter the Updated S-NSSAIs. This field is not available when the operation = removed. If the Operation = add, the S-NSSAI selected should be different from those configured for the corresponding TA in Tracking Area List.

Tcl Parameter: N22NnssfEmuNssaiAvailUpdEn

Tcl Parameter: N22NnssfNumUpdAmfSets

Tcl Parameter: N22NnssUpdAmfSetIdx_1

Tcl Parameter: N22NnssfUpdDelay_1

Tcl Parameter: N22NnssfUpdTaIdx_1

Tcl Parameter: N22NnssfUpdOper_1

Tcl Parameter: N22NnssfUpdSnssais_1

 

 

 

 

^ Back to Top