Use the Routing tab... in the Test Server Configuration window to define the routing options that are supported by the test server. You may define static routes. See the field descriptions for guidelines and rules for the field values.
Display a saved configuration... or modify the current configuration.
Use Add and Delete to add to the list or delete from the list. When you click Add, a new row is added to the list. Double-click the Neighbor cell to enter the neighbor's IP address or double-click the Remote AS cell to enter the neighbor's AS Number. Both fields must be defined for each neighbor. Remove a neighbor from the list by selecting the neighbor's row and then clicking Delete.
You can define a list of static routes to be used by the test server using the Add and Delete buttons in the Static Routes pane. When you click Add, a new row is added to the list. Double-click each of the fields to enter the Destination address, the Mask, and the Gateway address for the static route. Remove a route from the list by selecting the route's row and then clicking Delete.
TIP: To prevent communications between emulators from entering the network, define static routes for the address pools to their assigned Ethernet ports. |
Apply your configuration changes...
NOTE: If you click Refresh, Open, or Close before applying a modified configuration, you will be warned that your changes have not been applied. Click Yes to continue and discard your changes, or No to retain your modified configuration. |