The values on the S6c tab report the processing measurements for the S6c interface in the SMS Network test case.
In the default view, the Reports tab displays the Summary view, which summarizes the measurements for the test session. If your test includes multiple test cases, you can view the report for a single test case by changing the report view...
Unless otherwise noted, cumulative values report the number of occurrences or rates calculated since the start of the test, and per-interval values report the number of occurrences or rates calculated during the interval. You can view either by changing the measurement values...
Elapsed Time is the first measurement on every tab. It reports the amount of time between the start of the test and the end of the report interval.
Test Iteration reports the current iteration in a repeating test session. It is only displayed when a Number of Iterations is defined for the test session.
The following are measurements:
Send Routing Info for SM Request Sent — Indicates the number of Send Routing Info For SM request messages sent by the SMS-MSC.
Send Routing Info for SM Answer Rcvd — Indicates the number of Send Routing Info For SM answer messages received by the SMS-MSC.
Send Routing Info for SM Success — Indicates the number of Send Routing Info For SM requests that were successful in the SMS-MSC. The SMS_MSC recognized the MME returned in the answer message and has begun the process to deliver the SMS message to the subscriber via the specified MME.
Send Routing Info for SM Failures - Indicates the number of Send Routing Info For SM requests that failed in the SMS-MSC. One of the counters below will also be pegged as a result of the failure.
Unknown MME in SRI Answer - Indicates the number of Send Routing Info For SM answers that were received but the MME specified by the HSS was unknown in the SMS-MSC. This might possibly be a configuration issue ( MME SUTs) in the SMS Network test case.
Subscriber Unknown in HSS - Indicates the number of Send Routing Info For SM answers in which the HSS indicated it did not recognize the subscriber (IMSI).
SRI Answer Poorly Formed - Indicates the number of Send Routing Info For SM answers that were received by the SMS-MSC but were poorly formed (one of the AVPs was coded incorrectly).
SRI Answer Missing Mandatory AVP - Indicates the number of Send Routing Info For SM answers that were received by the SMS-MSC but had a missing AVP.
Error sending SRI Request - Indicates the number of Send Routing Info For SM answers that failed to be sent by the SMS Network due to a lower layer issue.
Send Routing Info Answer Timeout - Indicates the number of times an answer was not received for a Send Routing Info For SM request. When the timeout occurs, the request is attempted again.
Unknown Subscriber in SRI Request - Indicates the number of Send Routing Info For SM answers in which the HSS indicated it did not recognize the subscriber (IMSI) sent in the request message.
No SMS MME Registered in HSS - Indicates the number of Send Routing Info For SM answers in which the HSS indicated the MME serving the subscriber was not registered for SMS service.
HSS Rejected Request - Indicates the number of times the HSS rejected for a reason other than those listed above. A pcap should be captured and examined to determine the error code returned from the HSS.
Internal Parsing Error - Indicates the number of Send Routing Info For SM answer messages received in which parsing of the message yielded unexpected results.