Access Point Measurements


The values on the Access Point tab report the processing measurements for the Access point in a Wifi Offload Gateway Nodal test.

Measurement Values

In the default view, the Reports tab displays the Summary view, which summarizes the measurements for the test session. If your test includes multiple test cases, you can view the report for a single test case by changing the report view...

Unless otherwise noted, cumulative values report the number of occurrences or rates calculated since the start of the test, and per-interval values report the number of occurrences or rates calculated during the interval. You can view either by changing the measurement values...

Elapsed Time is the first measurement on every tab. It reports the amount of time between the start of the test and the end of the report interval.

Test Iteration reports the current iteration in a repeating test session. It is only displayed when a Number of Iterations is defined for the test session.

Message Counters

The following measurements record the number and types of messages exchanged between the AP and WOGW.

NOTE: The CAPWAP Data Channel Keep-Alive packet is used to bind the CAPWAP control channel with the data channel, and to maintain freshness of the data channel, ensuring that the channel is still functioning. The CAPWAP Data Channel Keep-Alive packet is transmitted by the WTP when the DataChannelKeepAlive timer expires. When the CAPWAP Data Channel Keep-Alive packet is transmitted, the WTP sets the DataChannelDeadInterval timer.