The values on the A1/A2 tab report the processing measurements for the A1/A2 interface in a UbiCell Test Case.
In the default view, the Reports tab displays the Summary view, which summarizes the measurements for the test session. If your test includes multiple test cases, you can view the report for a single test case by changing the report view...
Unless otherwise noted, cumulative values report the number of occurrences or rates calculated since the start of the test, and per-interval values report the number of occurrences or rates calculated during the interval. You can view either by changing the measurement values...
Elapsed Time is the first measurement on every tab. It reports the amount of time between the start of the test and the end of the report interval.
Test Iteration reports the current iteration in a repeating test session. It is only displayed when a Number of Iterations is defined for the test session.
The following measurements record the A1/A2 messages and actions related to BS connections.
Location Update Attempts — The number times the SGW attempted to update the location of the BS. Although this value is the sum of Successes and Failures, the equation may not hold true at any given time during session processing since some sessions may be in a transient state when the measurements are collected.
Location Update Successes — The number successful location updates.
Location Update Failures — The number times A1/A2 session failed to updated location due to errors.
Location Update Timeouts — The number of times a location Update Request was sent without receiving a response from the BS.
Call Origination Attempts — The number of times the BS attempted to originate a call.
Call Origination Successes — The number successful call origination attempts.
Call Origination Failures — The number times the BS failed to originate calls.
Call Origination Timeouts — The number of times a call was originated without receiving a response.
Call Termination Attempts — The number of times the BS attempted to terminate a call.
Call Termination Successes — The number successful call termination attempts.
Call Termination Failures — The number times the BS failed to terminate calls.
Call Termination Timeouts — The number of times a call was terminated without receiving a response.
Originator Disconnects — The number of times the originator disconnected calls.
Terminator Disconnects — The number of times the terminator disconnected calls.
The following measurements record error messages sent or received via the A1/A2 interface.
Location Update Retries Exceeded — The number of location update attempts that resulted in the defined Retries being exceeded.
CM Service Request Retries Exceeded — The number of times a Service Request was sent without receiving a response from the BS.
Assignment Request Retries Exceeded — The number of assignment request attempts that resulted in the defined Retries being exceeded.
Paging Request Retries Exceeded — The number of paging request attempts that resulted in the defined Retries being exceeded.
Paging Response Retries Exceeded — The number of paging response attempts that resulted in the defined Retries being exceeded.
Clear Request Retries Exceeded — The number of clear request attempts that resulted in the defined Retries being exceeded.
Clear Command Retries Exceeded — The number clear command attempts that resulted in the defined Retries being exceeded.