Landslide Performance Test System – Release 24.2 June 2024

Boot Operation

---

The Boot Operation tab is used to define the DNS, NTP, SMS servers the UbiCells initially contacts during the boot operation and the versions of the software images downloaded during the process.

• UbiCell Parameters

DNS JMS Domain Name Port	Retries Retry Interval		JMS Port Retries Retry Interval
NTP Leap Indicator Version Number Stratum	Poll Precision		Root Delay Root Dispersion Number of Queries Query Interval (s)

SMS SNMP Port SMS Port Ubicell Type Ubicell version

Position Message Retries Position Msg Retry Intervals (s) Cold Start Message Retries Cold Start Msg Retry Interval (s) Candidate FA Message Retries Candidate FA Msg Retry Interval (s)

Software Versions Boot Kernel Post Macro File Uccb	Mib Image Raw Firmware Append Firmware		Operational File Factory Kernel Factory Raw Factory Append Factory Image
Position 1 Latitude Longitude	Increment Increment		Boundary Boundary
Position 2 Latitude Longitude	Increment Increment		Boundary Boundary

Position Change on Reboot Apply Test Data File to Parameter Values

 

---

DNS

JMS Domain Name

The Jump start Management Server (JMS) is one of the elements of the UCM.  All UbiCells initially contact JMS during their boot operation. Use the checkbox to enter DNS (JMS) domain name, port and retry interval.

Tcl Parameter:

BootOpDnsJmsEn

BootOpDomainName

---

Port

Enter the boot operation DNS port.

Default: 1025

Tcl Parameter: BootOpDnsPort

---

Retries

Retries is the number of times a connection attempt will be re-transmitted after the retry time/interval expires.

---

Retry Interval

Retry Time is the value for the retry interval timer. The second retry attempt, if any, will be made after and the Retry Interval is exceeded.

 

^ Back to Top

---

JMS

Port

Enter the boot operation JMS port.

Default: 10626

Tcl Parameter: BootOpJmsPort

 

^ Back to Top

---

NTP

The UbiCell uses the standard NTP protocols to obtain the time from the network during boot operation.

Enter the following NTP system parameters for clock offset, roundtrip delay and dispersion, relative to the selected reference clock:

• Leap Indicator — Leap Indicator warning of impending leap-second to be inserted at the end of the last day of the current month.

• Version Number — Version number indicates the version number of the clock.

• Stratum — An integer identifying the stratum level of the local clock.

• Poll — Signed integer indicating the maximum interval between successive messages, in seconds to the nearest power of 2.
• Precision — Signed integer indicating the precision of the local clock, in seconds to the nearest power of 2.

• Root Delay — Signed fixed-point number indicating the total round trip delay to the primary reference source, in seconds with fraction point between bits 15 and 16.

Default: 1.0

Tcl Parameter: BootOpNtpRootDelay

• Root Dispersion — Unsigned fixed-point number indicating the nominal error relative to the primary reference source, in seconds with fraction point between bits 15 and 16.

Default: 1.0

Tcl Parameter: BootOpNtpRootDispersion

• Number of Queries — The number of times a request is sent to the NTP Server after the query interval expires.

Range: 1 — 65535

Default: 4

Tcl Parameter: BootOpNtpNumQueries

• Query Interval (s) — The number of seconds before the first query is sent and the interval between queries.

Range: 1 — 600

Default: 1

Tcl Parameter: BootOpNtpQueryInterval

^ Back to Top

---

SMS

The Secure Management Server (SMS).  One of the elements of the UCM. This is the element responsible for the day to day management of individual UbiCells.

• SNMP Port — Port used by SMS as the destination port.

Range: 1 — 65535

Default: 161

Tcl Parameter: BootOpSnmpPort

• SMS Port — The port number used for the SMS address

Range: 1 — 65535

Default: 64522

Tcl Parameter: BootOpSmsPort

• Ubicell Type — Type UbiCell device.

Range: 1 — 2177483647

Default: 2

Tcl Parameter: BootOpUbicellType

• Ubicell version —

Range: Upto 12 Characters

Default: 1.4.6

Tcl Parameter: BootOpUbicellVersion

• Position Message Retries — The number of times a Position Message will be re-transmitted after the Position Msg Retry Intervals (s) expires.

Range: 1 — 10

Default: 3

• Position Msg Retry Intervals (s) — Indicates the value for the retry interval timer. The second retry attempt, if any, will be made after both Idle Entry Time and the Retry Time are exceeded.

Range: 1 — 60

Default: 30

• Cold Start Message Retries — The number of times a Cold Start Message will be re-transmitted after the Cold Start Msg Retry Intervals (s) expires.

Range: 1 — 10

Default: 3

• Cold Start Msg Retry Interval (s) — Indicates the value for the retry interval timer. The second retry attempt, if any, will be made after both Idle Entry Time and the Retry Time are exceeded.

Range: 1 — 60

Default: 30

• Candidate FA Message Retries — The number of times a Candidate FA Message will be re-transmitted after the Candidate FA  Msg Retry Intervals (s) expires.

Range: 1 — 20

Default: 20

• Candidate FA Msg Retry Interval (s) — Indicates the value for the retry interval timer. The second retry attempt, if any, will be made after both Idle Entry Time and the Retry Time are exceeded.

Range: 1 — 60

Default: 10

^ Back to Top

---

Software Versions

Enter the versions of software image files downloaded by a Ubicell during boot operation.

Software	Default Versions (a maximum of 12 charecters)	Tcl Parameters
Boot	1.3.2	BootOpSoftwareVerBoot
Kernel	1.4.0	BootOpSoftwareVerKernel
Post	1.0.0	BootOpSoftwareVerPost
Macro File	1.16.0	BootOpSoftwareVerMacroFile
Uccb	1.0	BootOpSoftwareVerUccb
Mib	1.0.3	BootOpSoftwareVerMib
Image	3.3.3	BootOpSoftwareVerImage
Raw Firmware	1.4.0	BootOpSoftwareVerRawFirmware
Append Firmware	1.4.6	BootOpSoftwareVerAppendedFirmware
Operational File	1.4.6	BootOpSoftwareVerOperationFile
Factory Kernel	1.4.0	BootOpSoftwareVerFactoryKernel
Factory Raw	1.4.0	BootOpSoftwareVerFactoryRaw
Factory Append	1.4.6	BootOpSoftwareVerFactoryAppended
Factory Image	3.3.3	BootOpSoftwareVerFactoryImage

^ Back to Top

---

Position

On the Boot Operation tab, Position indicates the latitude and longitude associated with a UbiCell. The position values increment when more than 1 Ubicell is configured. You can configure a unique per-Ubicell position value using the Apply Test Data File to Parameter Value option.

Define a starting Position along with increment values and boundaries to be assigned to the UbiCells. Each time a new Position is required the system will add the increment values to the last Position value to generate a new Position value.

NOTE: The range of value of the Position 1 and Position 2 is the same for Latitude, Longitude, Increment and Boundary.

Range: -2147483647 —  2147483646

Default: 0

Tcl Parameters:

BootOpPos1Latitude	BootOpLat1Increment	BootOpLat1Boundary
BootOpPos1Longitude	BootOpLong1Increment	BootOpLong1Boundary
BootOpPos2Latitude	BootOpLat2Increment	BootOpLat2Boundary
BootOpPos2Longitude	BootOpLong2Increment	BootOpLong2Boundary

NOTES: When the Increment value is greater than zero, the Boundary value should not be less than the Latitude/Longitude value. When the Increment value is less than zero, the Boundary value should not be greater than the Latitude/Longitude value.

 

---

Position Change on Reboot

Use this checkbox to indicate that the Ubicell is allowed Position Change on Reboot.

Tcl Parameter: BootOpRebootPosChangeEn

---

Apply Parameters from Test Data File

See Parameter Features. You can obtain a sample file from your Technical Support representative.

 

^ Back to Top

---

© 2024 Spirent Communications Inc. All Rights Reserved.