SCP SBI Node


SCP SBI Node is available in the Service Based Node Emulator Configuration when SCP is enabled.

 

Use Alternate SBI Client Address

 

Server / Client

 

Host

MCC

MNC

NF Instance ID

 

Select Use Alternate SBI Client Address and enter the Client side interface details.

 

Enter Server IPv4 or IPv6 address configuration, # of Nodes from 1 to 1000. 

Enter Host address. Default: SCP.spirent.com

Enter MCC (Mobile Country Code) - 3 characters. Default : 000

Enter MNC (Mobile Network Code) - between 2 to 3 characters. Default : 00

If NF Instance ID is selected, enter the NF Instance ID. You may change the default value however you must ensure it does not conflict with any other SBI node.

Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet

Server Ethernet Configuration

Define:

Tcl Parameter: ScpSbiClnAddrEn

Tcl Parameter: ScpSbiNodeSrvAddr

Tcl Parameter: ScpSbiNodeClnAddr

Tcl Parameter: ScpSbiNodeSrvHost

Tcl Parameter: ScpMcc

Tcl Parameter: ScpMnc

Tcl Parameter: ScpSbiNodeNfInstanceIdEn

Tcl Parameter: ScpSbiNodeNfInstanceId

  • The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.

  • The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.