PCF SBI Node


PCF SBI Node is available when relevant options in the Service Based Node Emulator Configuration are enabled and on DRA Nodal Test Cnfg when PCRF Interface (Nbsf, Nnrf) are selected.

 

Use Alternate SBI Client Address

Use Alternate SBI Server Address

Use Alternate SBI Server's Client Address

Server / Client / Alternate Server / Alternate Client

 

Host

MCC

MNC

NF Instance ID

Alternate Server

Host

NF Instance ID

Select Use Alternate SBI Client Address and enter the Client side interface details.

Select Use Alternate SBI Server Address and enter the Alternate Server side Starting IP Address. Enter the Alternate Host, and NF Instance ID. Use for reroute/redirect when 503 is received - SBI Error Handling

Select Use Alternate SBI Server's Client Address and enter the Alternate Client side Starting IP Address. Enter the Alternate Host, and NF Instance ID. Use for reroute/redirect when 503 is received - SBI Error Handling.

Enter Server IPv4 or IPv6 address configuration, # of Nodes from 1 to 1000. Enter Host address. Default: PCF.SPirent.com

Enter MCC (Mobile Country Code) - 3 characters. Default : 000

Enter MNC (Mobile Network Code) - between 2 to 3 characters. Default : 00

If NF Instance ID is selected, enter the NF Instance ID. You may change the default value however you must ensure it does not conflict with any other SBI node.

Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet

Server Ethernet Configuration

Define:

Tcl Parameter: PcfSbiClnAddrEn

Tcl Parameter: PcfSbiAltSrvAddrEn

Tcl Parameter: PcfSbiAltClnAddrEn

Tcl Parameter: PcfSbiNodeSrvAddr

Tcl Parameter: PcfSbiNodeAltSrvAddr

Tcl Parameter: PcfSbiNodeAltSClnAddr

Tcl Parameter: PcfSbiNodeClnAddr

Tcl Parameter: PcfSbiNodeSrvHost

Tcl Parameter: PcfSbiNodeAltSrvHost

Tcl Parameter: PcfMcc

Tcl Parameter: PcfMnc

Tcl Parameter: PcfSbiNodeNfInstanceIdEn

Tcl Parameter: PcfSbiNodeNfInstanceId

Tcl Parameter: PcfSbiNodeAltNfInstanceIdEn

Tcl Parameter: PcfSbiNodeAltNfInstanceId

  • The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.

  • The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.