Non-RT RIC O1 Node
Click here to see this page in full context

Landslide Performance Test System – Release 24.3 September 2024

Non-RT RIC O1 Node

Non-RT RIC O1 Node is available when Non-RT and O1 Interface are enabled on the RIC Node Emulator Configuration test case. 

Currently only 1 Non-RT RIC O1 Node is emulated.

Number of Peers

 

Stop Rate

 

 

Number of Peers. Enter the Number of peer CU/DU nodes to be connected. Range is controlled by license.

 

Enter the Stop Rate (peer/sec) - Rate to release the connection to the peer CU/DU Node.

Range : 1.0 to 3000.0

Default : 1.0

Ethernet Configuration

Define:

Tcl Parameter: NonRtRicO1NodeAddr

Tcl Parameter: NonRtRicO1PeersNum

Tcl Parameter: NonRtRicO1StopRate

  • The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.

  • The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.

 

© 2024 Spirent Communications Inc. All Rights Reserved.