BSF SBI Node


BSF SBI Node is available when relevant options in the DRA Nodal Emulator Cnfg (when BSF (Nbsf) is enabled) and Service Based Nodal Test Configuration and in the Service Based Node Emulator Configuration are enabled.

 

Use Alternate SBI Client Address

 

Server / Client

 

Host

MCC

MNC

NF Instance ID

Select Use Alternate SBI Client Address and enter the Client side interface details.

 

Enter Server IPv4 or IPv6 address configuration, # of Nodes from 1 to 1000. Enter Host address. Default: BSF.SPirent.com

Enter MCC (Mobile Country Code) - 3 characters. Default : 000

Enter MNC (Mobile Network Code) - between 2 to 3 characters. Default : 00

If NF Instance ID is selected, enter the NF Instance ID. You may change the default value however you must ensure it does not conflict with any other SBI node.

Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet

Server Ethernet Configuration

Define:

Tcl Parameter: BsfSbiClnAddrEn

Tcl Parameter: BsfSbiNodeSrvAddr

Tcl Parameter: BsfSbiNodeClnAddr

Tcl Parameter: BsfSbiNodeSrvHost

Tcl Parameter: BsfMcc

Tcl Parameter: BsfMnc

Tcl Parameter: BsfSbiNodeNfInstanceIdEn

Tcl Parameter: BsfSbiNodeNfInstanceId

  • The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.

  • The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.