User Profile
Used to configure the user data entries. May be enabled by either the Sh or Cx interfaces from the HSS Nodal/Node and DRA Nodal.
|
|
| User Data Entries Name | Entries for Specific Data Name Increase or decrease Number of Elements by using: Add, Delete, Move Up, Move Down   
Use Tcl Icon
|
| Auto Filler Buffer 1 / 2 / 3 (used by Repository Data ) |
|
to find Tcl Variable names.
Related Measurements
Sh Session Measurements
Sh Session Measurements
Multiple User Profiles
| Enable Multiple User Profiles |
Available in HSS Node when Cx or Sh interface is enabled. Select for multiple subscriber groups in Landslide HSS Node emulating Cx / Sh interface and "User Profile" configuration per subscriber group. When "Enable Multiple User Profiles" is selected, the "Subscriber Groups and User Profile Assignments" table becomes visible (Subscribers in group, User Profile) . The selection allows 1-20 groups . Subscribers cannot overlap groups and all subscribers must be assigned to a group as shown in the example below. When "Enable Multiple User Profiles" is selected, the "Number of User Profiles" selection becomes visible. Under each User Profile sub-tab, the entire user profile content will be able to customize for this particular instance of user profile.
Tcl Parameter: HssMultiProfilesEn Tcl Parameter: HssProfSubscriberGroupCount Tcl Parameter: HssProfSubscriberGroup1Start Tcl Parameter: HssProfSubscriberGroup1End Tcl Parameter: HssProfSubscriberGroup1Profile |
User Data Entries
| Number of User Profiles | 1-20 |
Available when Enable Multiple User Profiles is selected. Select up to 20 User Data entry Profiles. You can enter the Profile number in the Repository Data section as shown in the example below.
Tcl Parameter: HssNumProfiles |
|
Number of Elements |
Note |
|
|
1 – 10 Technically, up to n; however, HSS - Sh server currently supports up to 10. Character limit increased to 1 to 65535. |
10 is the limit for HSS Node- DRA node can support up to the Maximum. Editing Repository Data entries is done with a custom table cell editor invoked by double-clicking the table row you wish to edit. A pop-up editor dialog (Edit Repository Data) appears that is re-sizeable and has a multi-line text field. The Repository Data XML field now supports two runtime substitution values, "{imsi}", and "{msisdn}". The substitution strings are case sensitive. When these key strings are added to the XML, they will be highlighted in blue in the cell editor (but not the table). The values instruct the TS to insert actual session values for IMSI or MSISDN during tests. When saving the Tcl values, the GUI removes the key strings and creates two integer arrays giving the substitution type and insertion point in the XML string. The arrays are in reverse order so insertion begins at the end of the XML string and offsets remain correct during the TS operation. The array variables will be null if no key strings are in the XML.
Auto Fill Buffer 1 / 2/ 3. Default = user#(N0). Enter up to three new identifiers for User-Data-Answer.
|
|
|
IMS User State |
1 |
Only enabled if Interface Cx is not part of the test otherwise IMS User info will be retrieved from Cx State. |
|
S-CSCF Name |
1 |
Only enabled if Interface Cx is not part of the test otherwise IMS User info will be retrieved from Cx State. |
|
Initial Filter Criteria |
0 to up to MAX_ENTRIES (currently 10) |
MAX_Entries is currently 10. |
|
Location Information |
3 |
Up to 3 for HSS Node- DRA node can support up to the Maximum. |
|
User State |
3 |
Up to 3 for HSS Node- DRA node can support up to the Maximum. |
|
Charging Information |
0 to up to MAX_ENTRIES |
MAX_Entries is currently 10. |
|
PSI Activation |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
DSAI |
Up to MAX_ENTRIES |
MAX_Entries is currently 10. |
|
Service Level Trace Info |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
Service Priority Level |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
SMS Registration Info |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
UE Reachability for IP |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
TADS Information |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
STN-SR |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
UE-SRVCC-Capability |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
Extended Priority |
Up to MAX_ENTRIES |
MAX_Entries is currently 10. |
|
CSRN |
1 |
1 is the limit for HSS Node- DRA node can support up to the Maximum. |
|
Reference Location Information |
Up to MAX_ENTRIES |
MAX_Entries is currently 10. |
|
Core Network Service Authorization |
0 or 1 |
0 or 1 for HSS Node. Currently not supported by DRA node. |
|
Public ID Extension |
1 |
1 is the limit for HSS Node. Currently not supported by DRA node. |
|
Service Profile Extension |
1 |
1 is the limit for HSS Node. Currently not supported by DRA node. |
|
Sh Data Extension |
Up to 3 |
Up to 3 for HSS Node. Currently not supported by DRA node. |
|
Sh Extension |
1 |
1 is the limit for HSS Node. Currently not supported by DRA node. |
to use the