Pcf to Chf NF Tab


The Pcf to Chf (Charging Function) NF (Network Function) Consumer tab is available when Test CHF (Nchf) from PCF (N28)  is selected on the Service Based Nodal test case.  About the 5G Application.

Per 3GPP TS 23.501, 23.502, 29.5xx, 29.594, 32.240, 32.255, 32.290, 32.291

Measurements collected for Service Based Node and Nodal related processing are reported on the related Consumer / Producer report tab.

NF Consumer

NF Consumer

 

 


 

Nchf Version (29.254)

 

Select the Nchf Version.

 Options: 15.2.0/Dec2018 (default) , 15.4.0/Jun2019

 Tcl Parameter: N28NchfSbiVersion

Use Access Token

Select “Use Access Token” option to support OAuth2 authorization for NF Consumer.

Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF  per spec TS 29.510 V16.3.0 section 5.4.2.2.1.

Select to enter Access Token. Enter up to 1023 characters

Tcl Parameter: N28NchfUseAccTokEn

Tcl Parameter: N28NchfAccTokEn

Tcl Parameter: N28NchfAccTok

Origination Timestamp

Select to include the Custom Http headers for Origination Timestamp and Max Response Time.

  1. 3gpp-Sbi-Origination-Timestamp: contains the date and time (with a millisecond granularity) when the originating entity initiated the request.
  2. 3gpp-Sbi-Max-Rsp-Time: indicates the duration expressed in milliseconds since the absolute time indicated in the 3gpp-Sbi-Origination-Timestamp header.

Nchf_SpendingLimitControl_Subscribe Request (SpendingLimitControl_Subscribe initial and SpendingLimitControl_Subscribe immediate requests) generated via the N28 (PCF-CHF) interface on Service Based Nodal test case will include these fields in the header.

Enter Max response Time in milliseconds.

Range : 1 to 60000

Default : 1

Tcl Parameter: N28Nchf3gppSbiOrigTimestampEn

Tcl Parameter: N28Nchf3gppSbiOrigTimestamp

 

Include Policy Counter List in Initial Request

Select to include the Policy Counter List in the Initial Request Message. Enter Number of Policy Counters to include and the Policy Counter ID.

Range : 1 to 8

Default : 1

Tcl Parameter: N28NchfInitPoCntListEn

Number of Policy Counters

Enter the Number of Policy Counters to include in the Initial Request Message.

Range : 1 to 8

Default : 1

Tcl Parameter: N28NchfInitPoCntNum

Policy Counter ID

Enter the Policy Counter IDs to include in the Initial Request Message.

Range : 1 to 64 characters

Tcl Parameter: N28NchfInitPoCntId_1

Include Policy Counter List in Intermediate Request

Select to include the Policy Counter List in the Intermediate Request Message. Enter Number of Policy Counters to include and the Policy Counter ID.

Range : 1 to 8

Default : 1

Tcl Parameter: N28NchfInterPoCntListEn

Number of Policy Counters

Intermediate

Enter the Number of Policy Counters to include in the Intermediate Request Message.

Range : 1 to 8

Default : 1

Tcl Parameter: N28NchfInterPoCntNum

Policy Counter ID

Intermediate

 Enter the Policy Counter IDs to include in the Intermediate Request Message.

Range : 1 to 64 characters

Tcl Parameter: N28NchfInterPoCntId_1

 

^ Back to Top