Nudr NF Tab


The Nudr NF tab is part of the SBI Protocol Stack for 5G. Per 3GPP TS 23.501, 23.502, 29.519, and 29.5xx. About the 5G Application.

NF Producer (Service Based Node)

NF Consumer (Service Based Nodal - SLF )

NF Producer (Service Based Node) - UDR General

General

Operator Specific Data

NF Producer (Service Based Node) - UDR Subscription Data

NF Producer (Service Based Node) - UDR Subscription Data - Access and Mobility Subscription Data

 

Internal Group IDs

NF Producer (Service Based Node) - UDR Subscription Data - UE AMBR

NF Producer (Service Based Node) - UDR Subscription Data -

RAT Restrictions

NF Producer (Service Based Node) - UDR Subscription Data -

Core Network Type Restrictions

SNF Producer (Service Based Node) - UDR Subscription Data - Service Area Restrictions

Forbidden Areas

NF Producer (Service Based Node) - UDR Subscription Data - Session Management Subscription Data

NF Producer (Service Based Node) - UDR Subscription Data - Session Management Subscription Data

NF Producer (Service Based Node) - UDR Subscription Data - Session Management Subscription Data

DNN Update (Available if "subscription-data/sm-data" is selected as Monitored Resource)

NF Producer (Service Based Node) - UDR Subscription Data - Session Management Subscription Data

DNN Update (Available if "subscription-data/sm-data" is selected as Monitored Resource)

NF Producer (Service Based Node) - UDR Subscription Data - SMS Subscription Data

NF Producer (Service Based Node) - UDR Subscription Data - SMS Subscription Data

NF Producer (Service Based Node) - Policy Data

Presence Information

Enable Presence Information

NF Producer (Service Based Node) - Policy Data

Presence Information

NF Producer (Service Based Node) Subscriber Categories - Policy Data

Enable Subscriber Categories

Enable Sm Policy Snsaai Data

NF Producer (Service Based Node) Sm Policy - Policy Data

SM Policy DNN Data Update

NF Producer (Service Based Node) Usage Monitor Data Limits - Policy Data

NF Producer (Service Based Node) Usage Monitor Data  - Policy Data

Usage Monitor Data

NF Producer (Service Based Node) - UDR Application Data

Group Setting

 

 


Nudr Version (29.505/29.519)

Nudr

SLF Nudr (23.502)

Select the Nudr Version. Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr).

Available when SLF (Nudr) is selected on Service Based Node test case on Interface Nudr (SLF).

Options: 15.4.0/Jun2019, 15.5.0/Sep2019

Tcl Parameter: NudrSbiVersion

API Prefix

Select to enter the API Prefix for UDR. Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr).

Select the Auto-Increment Format Wizard to Auto increment the API Prefix.

Tcl Parameter: NudrApiPrefixEn

Tcl Parameter: NudrApiPrefix

Validate Access Token

Select Validate Access Token to support OAuth2 Authorization for NF Producer.

Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF  per spec TS 29.510 V16.3.0 section 5.4.2.2.1.

Enter Secret Key. Options : String or Hex with 0x. Enter up to 32 characters.

Default : 0x00

Tcl Parameter: NudrValidateAccTokEn

Tcl Parameter: NudrAccTokSecKey

Origination Timestamp

Select to include the Custom Http headers for Origination Timestamp (3gpp-Sbi-Origination-Timestamp).

Tcl Parameter: Nudr3gppSbiOrigTimestampEn

Default Host Format in apiRoot   

IP     FQDN

Select which default host format to use in apiRoot, IP or FQDN (Fully Qualified Domain Name).

Default : IP

Spec reference : 3GPP 29.501, RFC #3986

Tcl Parameter: NudrDefaultHostFormat

Nudr Version (29.504)

Select the Nudr Version. Available when Test SLF (Nudr), From NRF  is selected on Service Based Nodal test case on Interface NRF-SLF.

Options: 16.2.0/Dec2019

Tcl Parameter: NrfNudrSbiVersion

NF Group ID Settings Number of Items

Enter the NF Group ID Settings. Available when Test SLF (Nudr), From NRF  is selected on Service Based Nodal test case on Interface NRF-SLF.

Select the Number of Items.

Range : 0 to 32

Default : 1

Tcl Parameter: NudrGINum

 

NF Group ID Settings Table Information:

Tcl Parameter: NudrGIMap_1

NF Type  

Select the NF Type.

Options : NRF, UDM, AMF, SMF, AUSF, NEF, PCF, SMSF, NSSF, UDR, LMF, GMLC, 5G-EIR, SEPP, UPF, N3IWF, AF, UDSF, BSF, CHF, NWDAF, PCSCF, CBCF, UCMF, HSS

Default: NRF

Starting UE Index

Enter the Starting UE Index.

Range : 0 to 99999999 (Actual maximum range is equal to Number of Subscribers - 1)

Default : 0

Ending UE Index

Enter the Ending UE Index.

Range : 0 to 99999999 (Actual maximum range is equal to Number of Subscribers - 1)

Default : 0

NF Group Identity

Enter the NF Group Identity. Enter at least one character.

 

 

General Pane (Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr)

PDU Sessions per UE

Enter the PDU Sessions per UE.

Range 1 to 15

Default : 1

Tcl Parameter: NudrGenPduNumPerUe

Subscriptions per Type in a UE

Enter the Subscriptions per Type in a UE.

Range 1 to 64

Default : 1

Tcl Parameter: NudrGenSubsNumPerType

UE Data Change Rate (UEs/s)

Enter the UE Data Change Rate per UE per second.

Range 0.001 to 3000.0

Default : 1.0

Tcl Parameter: NudrGenUeNtfRate

Monitored Resource

Select the monitored resource. Select to subscription-data/sm-data to trigger a dataChangeNotify message based on profile change.UDR should send profile change trigger dataChangeNotify message to UDM.

Reference : 3GPP TS 23.502, section 4.2.2.2

UDR->UDM: POST {Notification_URI} (dataChangeNotify)
PCF->UDR: 204 No Content
UDR sends notification to UDM. DataChangeNotification contains the updated session management subscriber data. And the updated resource described in the notify Items from DataChangeNotification is a subscription-data resource.

Select policy-data/sm-data to trigger notification of policy data SmPolicyDnnData changes (subscSpendingLimits changes to FALSE from TRUE) sending from the emulated UDR to PCF SUT during an ongoing PDU session. 3GPP TS 29.519 Clause 5.4.2.15, subscSpendingLimits indicates whether the PCF must enforce policies based on subscriber spending limits. 

Options : subscription-data/sm-data, policy-data/sm-data

Tcl Parameter: NudrGenNtf_1

 

General Pane - Operator Specific Data 

Policy, Subscription data

Enable Operator Specific Data

Select Enable Operator Specific Data to add up to 3 Operator Specific Data sets for Policy and Subscription Data. You have the option to create an operator specific data set for String, Boolean, Integer and Number elements.

Tcl Parameter: NudrGenOpSpecDataEn

 

Enable Operator Specific Data - Policy Data to add up to 3 Operator Specific Data sets for Policy Data.

Tcl Parameter: NudrGenOpSpecDataPolEn

 

Enable Operator Specific Data - Subscription Data to add up to 3 Operator Specific Data sets for Subscription Data.

Tcl Parameter: NudrGenOpSpecDataSubEn

 

Operator Specific Data Settings Table Information:

# of String Element

Select the # of String Elements for Policy and Subscription Data.

Options : 0, 1, 2, 3

For each String Element, enter :

Name, Value

Tcl Parameter: NudrGenPolOpSpecDataContStrIdx

Tcl Parameter: NudrGenPolOpSpecDataContStrName_1

Tcl Parameter: NudrGenPolOpSpecDataContStrVal_1

Tcl Parameter: NudrGenSubOpSpecDataContStrIdx

Tcl Parameter: NudrGenSubOpSpecDataContStrName_1

Tcl Parameter: NudrGenSubOpSpecDataContStrVal_1

# of Boolean Element

Select the # of Boolean Elements for Policy and Subscription Data.

Options : 0, 1, 2, 3

For each Boolean Element, enter :

Name, Value (true, false)

Tcl Parameter: NudrGenPolOpSpecDataContBoolIdx

Tcl Parameter: NudrGenPolOpSpecDataContBoolName_1

Tcl Parameter: NudrGenPolOpSpecDataContBoolVal_1

Tcl Parameter: NudrGenSubOpSpecDataContBoolIdx

Tcl Parameter: NudrGenSubOpSpecDataContBoolName_1

Tcl Parameter: NudrGenSubOpSpecDataContBoolVal_1

# of Integer Element

Select the # of Integer Elements for Policy and Subscription Data.

Options : 0, 1, 2, 3

For each Integer Element, enter :

Name, Value 

Tcl Parameter: NudrGenPolOpSpecDataContIntIdx

Tcl Parameter: NudrGenPolOpSpecDataContIntName_1

Tcl Parameter: NudrGenPolOpSpecDataContIntVal_1

Tcl Parameter: NudrGenSubOpSpecDataContIntIdx

Tcl Parameter: NudrGenSubOpSpecDataContIntName_1

Tcl Parameter: NudrGenSubOpSpecDataContIntVal_1

# of Number Element

Select the # of Number Elements for Policy and Subscription Data.

Options : 0, 1, 2, 3

For each Number Element, enter :

Name, Value 

Tcl Parameter: NudrGenPolOpSpecDataContNumIdx

Tcl Parameter: NudrGenPolOpSpecDataContNumName_1

Tcl Parameter: NudrGenPolOpSpecDataContNumVal_1

Tcl Parameter: NudrGenSubOpSpecDataContNumIdx

Tcl Parameter: NudrGenSubOpSpecDataContNumName_1

Tcl Parameter: NudrGenSubOpSpecDataContNumVal_1

# of  Object Element

Select the # of Object Elements for Policy and Subscription Data. Available when Version > = "15.5.0/Sep2019 ".

Options : 0, 1, 2, 3

For each Object Element, enter :

Name, JSON Object Value for Row

Example :

Tcl Parameter: NudrGenPolOpSpecDataContObjIdx

Tcl Parameter: NudrGenPolOpSpecDataContObjName_1

Tcl Parameter: NudrGenPolOpSpecDataContObjVal_1

Tcl Parameter: NudrGenSubOpSpecDataContObjIdx

Tcl Parameter: NudrGenSubOpSpecDataContObjName_1

Tcl Parameter: NudrGenSubOpSpecDataContObjVal_1

Application Data (Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr)

Group ID Settings

Enter the Group ID Settings. (Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr)

Select the Group Number.

Range : 0 to 16

Default : 1

Tcl Parameter: NudrAppAppDataGroupNum

 

Group ID Settings Table Information:

For each Group, enter the Starting UE Index, Ending UE Index and Group Identity.

Starting UE Index / Ending UE Index : Starting UE Index must be greater than Ending UE Index. Both Starting and Ending UE index must be less than the Number Of Subscribers.

Tcl Parameter: NudrAppAppDataGroupId_1

Starting UE Index

Enter the Starting UE Index, it must be less than the Ending UE Index and less than the number of subscribers.

Range : 0 to 65535

Default : 0

Ending UE Index

Enter the Ending UE Index, it must be less than the number of subscribers.

Range : 0 to 65535

Default : 0

Group Identity

Enter Group Identity using the following format : [A-Fa-f0-9]{8}-[0-9]{3}-[0-9]{2,3}-([a-fA-F0-9][a-fA-F0-9]){1,10} . Group Identities must be unique.

Defined in 3GPP 29.571.

IMSI-Group Identifier is a network internal globally unique ID which identifies a set of IMSIs (e.g. MTC devices) from a given network that are grouped together for one specific group related services.

IMSI-Group Identifier is composed of four parts:

1)  Group Service Identifier identifies the service (4 Octets) for which the IMSI-Group Identifier is valid.

2)  Mobile Country Code (MCC) consisting of three digits. The MCC identifies uniquely the country of domicile of the mobile subscriber.

3)  Mobile Network Code (MNC) consisting of two or three digits. The MNC identifies the home PLMN of the mobile subscriber. The length of the MNC (two or three digits) depends on the value of the MCC. A mixture of two and three-digit MNC codes within a single MCC area is not recommended and is outside the scope of this specification.

4)  the Local Group Id is assigned by the network operator and may have a length of up to 10 octets.

Two different IMSI-Group Identifier values, with the same Group Service Identifier and with MCC/MNC values that point to the same PLMN, shall have two different Local Group Ids

 

Validate SUPI Existence of Influence Data

Select to validate the SUPI existance of Influence Data (UDR will manage the Influence Data at UE-LEVEL insteed of APPL-LEVEL management for Application Data ). If incoming Influence Data has no SUPI, the request will be denied when the option is checked.

Tcl Parameter: NudrAppValSupiExistInfluData

 

Subscription Data (Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr)

Authentication Method

Select the Authentication Method.

Options : 5G_AKA (default), EAP_AKA_PRIME, EAP_TLS

Tcl Parameter: NudrSubAuthMethName

Encrypted Permanent Key

Select to enter an Encrypted Permanent Key.

Hex string of 16 bytes.

Default : 1111111111111111

Tcl Parameter: NudrSubAuthEncPerKeyEn

Tcl Parameter: NudrSubAuthEncPerKey

Protection Parameter ID

Select to enter a Protection Parameter ID.

Hex string of 1 to 16 bytes.

Default : 1

Tcl Parameter: NudrSubAuthProPraidEn

Tcl Parameter: NudrSubAuthProPraid

Sequence Number

Select Sequence Number and enter the Sequence Number Settings. (Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr)

Tcl Parameter: NudrSubAuthSequNumEn

 

Sequence Number Information:

Scheme

Select the Scheme.

Options: GENERAL (default), NON_TIME_BASED, TIME_BASED

Tcl Parameter: NudrSubAuthSqnScheme

SQN

Select to enter a Sequence Number (SQN). Part of the Authentication.

Enter a Hex string of 12 digits

Default : 111111111111

SQN Design:

1. When Scheme = GENERAL: Sqn value is "1444ffffffff".

2. When Scheme = "NON_TIME_BASED",  Sqn value is "1444ffffffe0". In "Authentication Subscription Data patch", Sqn value add 1. Sqn value is 144500000000 (1444ffffffff+1). Sqn value = 1444ffffffff<<5 (left shift 5 bits).

 

3. In "Authentication Subscription Data patch", Sqn value right shift 5 bits, then add 1, then left shift 5 bits.

Sqn value is 144500000000 (((1444ffffffe0 >>5)+1)<<5 )

  1. Scheme = "TIME_BASED":  Sqn value is current time add or decrease default DIF value, DIF Sign decide add or decrease default DFI value, add or decrease decided by “DIF Sign”, then left shift 5 bits.

In "Authentication Subscription Data patch", Sqn value is current time add or decrease default DIF value, add or decrease decided by “DIF Sign”, then left shift 5 bits.

Tcl Parameter: NudrSubAuthSqnValueEn

Tcl Parameter: NudrSubAuthSqnValue

IND Length

Select to enter a IND Length. Part of the Authentication.

Range : 5 to 48

Default : 5

Tcl Parameter: NudrSubAuthSeqIndLengthEn

Tcl Parameter: NudrSubAuthSeqIndLength

DIF Sign

Select the DIF Sign.

Options : Positive (default) or Negative

Tcl Parameter: NudrSubAuthSeqDifSignEn

Tcl Parameter: NudrSubAuthSeqDifSign

Last Indexes

Select to enter the Last Indexes. Only 1 index is allowed.

Select the Node Type. Default = ausf.

Select the Value.

Enter a Hex string of 6 digits

Default : 111111

Tcl Parameter: NudrSubAuthSeqLindexsNumEn

Tcl Parameter: NudrSubAuthSeqLindexsNum

Tcl Parameter: NudrSubAuthSeqIndex_1

Authentication Management Field

Select to enter an Authentication Management Field.

Hex string of 2 bytes.

Default : 11

Tcl Parameter: NudrSubAuthManFieldEn

Tcl Parameter: NudrSubAuthManField

Algorithm ID

Select to enter an Algorithm ID.

Hex string of 1 to 16 bytes.

Default : 1

Tcl Parameter: NudrSubAuthAlgIdEn

Tcl Parameter: NudrSubAuthAlgId

Encrypted OPC Key

Select to enter an Encrypted OPC Key.

Hex string of 16 bytes.

Default : 1111111111111111

Tcl Parameter: NudrSubAuthEncOpcKeyEn

Tcl Parameter: NudrSubAuthEncOpcKey

 Encrypted TOPC Key

Select to enter an Encrypted TOPC Key.

Hex string of 16 bytes.

Default : 1111111111111111

Tcl Parameter: NudrSubAuthEncTopcKeyEn

Tcl Parameter: NudrSubAuthEncTopcKey

 

Access and Mobility Subscription Data (Available when UDR (Nudr) is selected on Service Based Node test case on Interface UDR (Nudr)

DNN with Starting SUPI Mode via TDF

Select "DNN with Starting SUPI Mode via TDF" to allocate the SUPI from the DNN entry in the TDF file. Each Row (Multiplier Label) is a different DNN. SBI Node can support up to 1500 unique DNNs.

The SUPI values will be allocated based on the STARTING_SUPI and its range of each DNN entry from this TDF file. 

The available columns of TDF file is:

STARTING_SUPI SUPI_RANGE PLMN_INDEX SM_INDEX NSSAI DNN_INDEX DNN_NAME DEFAULT_SNSSAI UPDATED_DATA

 

STARTING_SUPI shall be numeric, at most 15 digts.

SUPI_RANGE shall be numeric, in range 1..2147483647.

PLMN_INDEX shall be numeric, in range 1..8.

SM_INDEX shall be numeric, and in range 1..8.

DNN_INDEX shall be numeric, and in range 1..16.

NSSAI has format as ([0-9][0-9]*)(-)([0-9a-f][0-9a-f])* or ([0-9][0-9])*, the first part is SST which value is from 0 to 255, the second part is SD which value is from 1 to 6 Hex characters, the two parts are combined with '-', and the first part shall be mandatory, the second part can be optional.

DNN_NAME contains up to 63 characters, at least one character.

DEFAULT_SNSSAI shall be 0 or 1.

UPDATED_DATA shall be 0 or 1.

Tcl Parameter: NudrSubSmDnnSupiCfgFileEn

Tcl Parameter: NudrSubSmDnnSupiCfgFile

PLMN

Enter the Number of PLMN.

Range: 0 to 8

Enter the Home PLMN MCC (2 digits) and MNC (2 or 3 digits).

Tcl Parameter: NudrSubPlmnNum

Tcl Parameter: NudrSubPlmn_1

Internal Group IDs

Number  of Internal Group IDs

 

Select the number of Internal Group IDs. Identifying a group of devices network internal globally unique ID which identifies a set of IMSIs as specified in clause 19.9 of 3GPP TS 23.003 [7].

Range: 0 to 8

Enter Internal Group ID using the following format : [A-Fa-f0-9]{8}-[0-9]{3}-[0-9]{2,3}-([a-fA-F0-9][a-fA-F0-9]){1,10} . Group Identities must be unique.

 

 Tcl Parameter: NudrSubNumIntGrpIds_1

 Tcl Parameter: NudrSubIntGrpId_1

UE AMBR

 

Select to Subscribed UE Aggregate Maximum Bit Rate (AMBR).

Select to enter UE AMBR Uplink and Downlink.

Range: 0 to 65535

Default: 1

Range: bps, kbps, Mbps (default), Gbps, Tbps

Default: Mbps

Tcl Parameter: NudrSubSubUeAmbrEn_1

Tcl Parameter: NudrSubSubUeAmbrUlRate_1

Tcl Parameter: NudrSubSubUeAmbrDlRate_1

Tcl Parameter: NudrSubSubUeAmbrUlUnit_1

Tcl Parameter: NudrSubSubUeAmbrDlUnit_1

RAT Restrictions

Select RAT Restrictions. Select NR, EUTRA, WLAN, VIRTUAL    Tcl Parameter: NudrSubNrEn_1 Tcl Parameter: NudrSubEutraEn_1 Tcl Parameter: NudrSubWlanEn_1 Tcl Parameter: NudrSubVirtualEn_1

Core Network Type Restrictions

Select Core Network Type Restrictions. Select 5GC, EPC    Tcl Parameter: NudrSub5gcEn_1 Tcl Parameter: NudrSubEpcEn_1

Service Area Restrictions

Select the number of Service Area Restrictions.

Range: 0 to 16

Tcl Parameter: NudrSubServiceAreaResAreaNum_1

Restriction Type  

Select the Restriction Type.

Options: Allowed, Not Allowed

Default: Allowed

When Restriction Type = Allowed, you can enable Only Number of Service Areas

Tcl Parameter: NudrSubServiceRestrictionType_1

Tcl Parameter: NudrSubServiceAreaResOnlyNumberInfo_1

Number of TACs

Enter the Number of Tracking Area Codes (TACs).

Enter up to 16 Tracking Area Codes (TAC). Enter up 6 Hex digits.

Range: 0 to 16

Tcl Parameter: NudrSubServiceAreaResTacsNum_1_1

Tcl Parameter: NudrSubServiceAreaResTac_1_1

Number of Area Codes

Enter the Number of Area Codes.

Enter up to 16 Area Codes. Enter up 6 Hex digits.

Range: 0 to 16

Tcl Parameter: NudrSubServiceAreaResAreaCodeNum_1_1

Tcl Parameter: NudrSubServiceAreaResAreaCode_1_1

 

 

Forbidden Areas

Select the number of Forbidden Areas.

Range: 0 to 16

Tcl Parameter: NudrSubForbiddenAreasNum_1

Number of TACs

Enter the Number of Tracking Area Codes (TACs).

Enter up to 16 Tracking Area Codes (TAC). Enter up 6 Hex digits.

Range: 0 to 16

Tcl Parameter: NudrSubForbiddenTacsNum_1_1

Tcl Parameter: NudrSubForbiddenTac_1_1

Number of Area Codes

Enter the Number of Area Codes.

Enter up to 16 Area Codes. Enter up 6 Hex digits.

Range: 0 to 16

Tcl Parameter: NudrSubForbiddenAreaCodeNum_1_1

Tcl Parameter: NudrSubForbiddenAreaCode_1_1

RFSP Index

Select to enter RFSP Index.  (RAT/Frequency selection Priority).

Range: 1 to 255

Default : 1

Tcl Parameter: NudrSubRfspIdxEn_1

Tcl Parameter: NudrSubRfspIdx_1

Periodic Registration Timer (s)

Select to enter Periodic Registration Timer in seconds.

Range: 0 to 4294967295

Default : 1

Tcl Parameter: NudrSubPeriodicRegTimerEn_1

Tcl Parameter: NudrSubPeriodicRegTimer_1

UE Usage Type

Select to enter UE Usage Type.

Range: -2147483648 to 2147483647

Default : 0

Tcl Parameter: NudrSubUeUsageTypeEn_1

Tcl Parameter: NudrSubUeUsageType_1

MPS Priority Indicator

Select for Multimedia Priority Service (MPS) Priority Indicator.

Tcl Parameter: NudrSubMpsPriorityIndEn_1

Active Time for PSM UE (s)

Select to enter Active Time for PSM UE (s)

Range: 0 to 4294967295

Default : 1

Tcl Parameter: NudrSubActiveTimePsmUeEn_1

Tcl Parameter: NudrSubActiveTimePsmUe_1

DL Buffering Suggested Packet Count

Select to enter Downlink (DL) Buffering Suggested Packet Count.

Range: -1 to 65535

Default : 0

Tcl Parameter: NudrSubDlPktCountEn_1

Tcl Parameter: NudrSubDlPktCount_1

MICO Allowed

Select to indicate if Mobile Initiated Connection Only (MICO) is allowed.

Tcl Parameter: NudrSubMicoAllowedEn_1

Tcl Parameter: NudrSubMicoAllowed_1

 

Session Management Subscription Data

Number of SM Subscriptions

Enter Number of Session Management Subscriptions.

Enter SM Data 1 up to 8. Enter Single Nssai. Note that each SM Data cannot be configured with the same single NSSAI during configuration.

A NSSAI is a collection of smaller components, Session Management NSSAIs (SM-NSSAI), which include a Slice Service Type (SST) and possibly a Slice  Differentiator (SD). Slice service type refers to an expected network behavior in terms of features and services (e.g. specialized for broadband or massive    IoT), while the slice differentiator can help selecting among several Network Slice instances of the same type, e.g. to isolate traffic related to different  services into different slices.

Enter SST (Slice Service Type) and SD (Slice Differentiator).

Tcl Parameter: NudrSubNumSmSubs_1

Tcl Parameter: NudrSubSmSnssai_1_1

Number of DNNs

Enter up to 16 DNNs (Data Network Name). DNN is equivalent to APN.

Tcl Parameter: NudrSubSmNumDnns_1_1

DNN

DNN Update 

Enter DNN Description. Up to 63 characters.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnn_1_1_1

Tcl Parameter: NudrSubSmUpdDnn_1_1_1

Default Indicator

Select to enable the default indicator.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnnDefaultIndEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnDefaultIndEn_1_1_1

LBO Roaming Allowed

Select to enable if LBO Roaming is allowed.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnnLboAllowedEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnLboAllowedEn_1_1_1

Default Session Type

Select the default session type and any additional session types below.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Options: IPv4 (default ), IPv6, IPv4v6, Unstructured and Ethernet

Tcl Parameter: NudrSubSmDnnDefaultSessionType_1_1_1

Tcl Parameter: NudrSubSmUpdDnnDefaultSessionType_1_1_1

Additional Session Types

Select additional session types.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Options: IPv4v6 (default ), IPv4, IPv6, Unstructured and Ethernet

Tcl Parameter: NudrSubSmDnnSessTypeIpv4v6En_1_1_1

Tcl Parameter: NudrSubSmDnnSessTypeIpv4En_1_1_1

Tcl Parameter: NudrSubSmDnnSessTypeIpv6En_1_1_1

Tcl Parameter: NudrSubSmDnnSessTypeUnstrEn_1_1_1

Tcl Parameter: NudrSubSmDnnSessTypeEthEn_1_1

Tcl Parameter: NudrSubSmUpdDnnSessTypeIpv4v6En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessTypeIpv4En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessTypeIpv6En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessTypeUnstrEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessTypeEthEn_1_1

Default SSC Mode

Select Default SSC Mode.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Options: SSC_MODE_1, SSC_MODE_2, SSC_MODE_3

Tcl Parameter: NudrSubSmDnnDefaultSScMode_1_1_1

Tcl Parameter: NudrSubSmUpdDnnDefaultSScMode_1_1_1

Additional SSC Modes

Select additional SSC Modes.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Options: SSC_MODE_1, SSC_MODE_2, SSC_MODE_3

Tcl Parameter: NudrSubSmDnnSScMode1En_1_1_1

Tcl Parameter: NudrSubSmDnnSScMode2En_1_1_1

Tcl Parameter: NudrSubSmDnnSScMode3En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSScMode1En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSScMode2En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSScMode3En_1_1_1

lwk EPS Indicator

Select to enable Iwk EPS indicator.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnnIwkEpsIndEn_1_1_1

Tcl Parameter: NudrSubSmDnnIwkEpsInd_1_1_1

Tcl Parameter: NudrSubSmUpdDnnIwkEpsIndEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnIwkEpsInd_1_1_1

LADN Indicator

Select to enable Local Area Data Network (LADN) indicator. Not available when Nudr Version > 15.2.0/Dec2018.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnnLadnIndEn_1_1_1

Tcl Parameter: NudrSubSmDnnLadnInd_1_1_1

Tcl Parameter: NudrSubSmUpdDnnLadnIndEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnLadnInd_1_1_1

3GPP Charging Characteristics

Select to enable 3GPP Charging Characteristics. In release 19.2, the data entry requirements changed from allowing up to 4 Hex characters to requiring 4 Hex characters.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnn3gppChargeChEn_1_1_1

Tcl Parameter: NudrSubSmDnn3gppChargeCh_1_1_1

Tcl Parameter: NudrSubSmUpdDnn3gppChargeChEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnn3gppChargeCh_1_1_1

Up Security

Select to indicate if Up Integrity and Up Confidentiality are Required (default), Preferred or Not Needed.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnnUpSecurityEn_1_1_1

Tcl Parameter: NudrSubSmDnnUpIntegrity_1_1_1

Tcl Parameter: NudrSubSmDnnUpConfidentiality_1_1_1

5G QoS Profile

Select to enable 5G QoS Profile.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Tcl Parameter: NudrSubSmDnnQosEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnQosEn_1_1_1

5Qi  

Enter the 5Qi (5 QoS ID).

Range: 0 to 255

Default: 1

 

Tcl Parameter: NudrSubSmDnn5qi_1_1_1

Tcl Parameter: NudrSubSmUpdDnn5qi_1_1_1

Priority Level

Select to enable 5qi Priority level.

Range: 1 to 127

Default: 1

Tcl Parameter: NudrSubSmDnn5qiPriorityLevelEn_1_1_1

Tcl Parameter: NudrSubSmDnn5qiPriorityLevel_1_1_1

Tcl Parameter: NudrSubSmUpdDnn5qiPriorityLevelEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnn5qiPriorityLevel_1_1_1

ARP Priority Level

Enter the ARP Priority level.

Range: 1 to 15

Default: 1

Tcl Parameter: NudrSubSmDnnPriorityLevel_1_1_1

Tcl Parameter: NudrSubSmUpdDnnPriorityLevel_1_1_1

Preemption Capability

Select to enable Preemption Capability.

Tcl Parameter: NudrSubSmDnnPreemptCapEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnPreemptCapEn_1_1_1

Preemption Vulnerability

Select to enable Preemption Vulnerability.

Tcl Parameter: NudrSubSmDnnPreemptVulEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnPreemptVulEn_1_1_1

 

 

Session AMBR

Select to enable Session AMBR.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

Select to enter AMBR Uplink and Downlink.

Range: 0 to 65535

Default: 1

Range: bps, kbps, Mbps (default), Gbps, Tbps

Default: Mbps

Tcl Parameter: NudrSubSmDnnSessAmbrEn_1_1_1

Tcl Parameter: NudrSubSmDnnSessAmbrUlRate_1_1_1

Tcl Parameter: NudrSubSmDnnSessAmbrDlRate_1_1_1

Tcl Parameter: NudrSubSmDnnSessAmbrUlUnit_1_1_1

Tcl Parameter: NudrSubSmDnnSessAmbrDlUnit_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessAmbrEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessAmbrUlRate_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessAmbrDlRate_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessAmbrUlUnit_1_1_1

Tcl Parameter: NudrSubSmUpdDnnSessAmbrDlUnit_1_1_1

Static IP Addresses

V4 Address

V6 Address

V6 Prefix

Select to enter a valid V4, V6 Static Address and a valid V6 Prefix for Static IP Addresses.

DNN Update becomes available if "subscription-data/sm-data" is selected as Monitored Resource).

A valid V6 prefix requires '[IPv6 Address] / [Prefix Length]'.

Tcl Parameter: NudrSubSmDnnStaticIpv4En_1_1_1

Tcl Parameter: NudrSubSmDnnStaticIpv4_1_1_1

Tcl Parameter: NudrSubSmDnnStaticIpv6En_1_1_1

Tcl Parameter: NudrSubSmDnnStaticIpv6_1_1_1

Tcl Parameter: NudrSubSmDnnStaticIpv6PrefEn_1_1_1

Tcl Parameter: NudrSubSmDnnStaticIpv6Pref_1_1_1

Tcl Parameter: NudrSubSmUpdDnnStaticIpv4En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnStaticIpv4_1_1_1

Tcl Parameter: NudrSubSmUpdDnnStaticIpv6En_1_1_1

Tcl Parameter: NudrSubSmUpdDnnStaticIpv6_1_1_1

Tcl Parameter: NudrSubSmUpdDnnStaticIpv6PrefEn_1_1_1

Tcl Parameter: NudrSubSmUpdDnnStaticIpv6Pref_1_1_1

 

SMS Subscription Data / SMS Management Data

SMS Subscription Data / SMS Management Data

Select to indicate the SMS Subscribed status. Enter the SMS related Subscription Data.

Required for UDR to support Nudr_DM_Update query from UDM during Registration Procedures for SMS over NAS.

Options : true or false

Tcl Parameter: NudrSubSmsSubscribedEn_1

Tcl Parameter: NudrSubSmsSubscribed_1

Select to enter the Shared SMS Subscription Data ID.The string should follow the pattern: "[0-9]{5,6}-.+".

Tcl Parameter: NudrSubSharedSmsSubDataIdEn_1

Tcl Parameter: NudrSubSharedSmsSubDataId_1

SMS Management Subscription Data

Supported Features

Select to enter the Supported features.

Enter 1 to 8 Hex Characters without Prefix 0x.

Tcl Parameter: NudrSubSupportedFeaturesEn_1

Tcl Parameter: NudrSubSupportedFeatures_1

MT-SMS Subscribed

Select to indicate the MT-SMS Subscribed status. 

Options : true or false

Tcl Parameter: NudrSubMtSmsSubscribedEn_1

Tcl Parameter: NudrSubMtSmsSubscribed_1

MT-SMS Barring All

Select to indicate the MT-SMS Barring All status. 

Options : true or false

Tcl Parameter: NudrSubMtSmsBarringAllEn_1

Tcl Parameter: NudrSubMtSmsBarringAll_1

MT-SMS Barring Roaming

Select to indicate the MT-SMS Barring Roaming status. 

Options : true or false

Tcl Parameter: NudrSubMtSmsBarringRoamingEn_1

Tcl Parameter: NudrSubMtSmsBarringRoaming_1

MO-SMS Subscribed

Select to indicate the MO-SMS Subscribed status. 

Options : true or false

Tcl Parameter: NudrSubMoSmsSubscribedEn_1

Tcl Parameter: NudrSubMoSmsSubscribed_1

MO-SMS Barring All

Select to indicate the MO-SMS Barring All status. 

Options : true or false

Tcl Parameter: NudrSubMoSmsBarringAllEn_1

Tcl Parameter: NudrSubMoSmsBarringAll_1

MO-SMS Barring Roaming

Select to indicate the MO-SMS Barring Roaming status. 

Options : true or false

Tcl Parameter: NudrSubMoSmsBarringRoamingEn_1

Tcl Parameter: NudrSubMoSmsBarringRoaming_1

Number of Shared SMS Mng Data IDs

Enter the number of Shared SMS Management Data Id's. Enter the Shared SMS Management Data ID in the table provided. The string should follow the pattern: "[0-9]{5,6}-.+".

Tcl Parameter: NudrSubSharedSmsMngDataIdNum_1

Tcl Parameter: NudrSubSharedSmsMngDataId_1_1

Presence Information

Enable Presence Information

Select to enable the captures of Presence Information.

Tcl Parameter: NudrPolPreseInfoEn

Number of Presence Information

Select the number of Presence Information.

Range: 1 to 4

Tcl Parameter: NudrPolPreseNumber

Presence Info ID  

Enter the Presence Info ID.

Range: 1 to 255 characters

Default: pres_info_1, pres_info_2, pres_info_3, pres_info_4

Tcl Parameter: NudrPolPreseInfoId_1

Presence State

Select the Presence State.

Options: IN_AREA, OUT_OF_AREA, UNKNOWN, INACTIVE

Tcl Parameter: NudrPolPreseStateEn_1

Tcl Parameter: NudrPolPreseState_1

Tracking Area List

Select to enter the Tracking Area Lists (up to 4)

Tcl Parameter: NudrPolPreseIncTacListEn_1

Tcl Parameter: NudrPolPreseIncTacListNum_1

MCC MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NudrPolPreseTacListMcc_1_1

Tcl Parameter: NudrPolPreseTacListMnc_1_1

TAC

Enter the Tracking Area Code (TAC). Enter 4 to 6 Hex digits.

Tcl Parameter: NudrPolPreseTacListTac_1_1

 

NCGI List

Select to enter the NCGI (New Radio) Lists (up to 4).

Tcl Parameter: NudrPolPreseIncNcgiListEn_1

Tcl Parameter: NudrPolPreseIncNcgiListNum_1

MCC MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NudrPolPreseNcgiListMcc_1_1

Tcl Parameter: NudrPolPreseNcgiListMnc_1_1

NR Cell Id.

Enter the New Radio (NR) Cell ID. Enter 9 Hex digits.

Tcl Parameter: NudrPolPreseNcgiListNrCellId_1_1

 

ECGI List

Select to enter the ECGI (EUTRAN) Lists (up to 4).

Tcl Parameter: NudrPolPreseIncEcgiListEn_1

Tcl Parameter: NudrPolPreseIncEcgiListNum_1

MCC MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NudrPolPreseEcgiListMcc_1_1

Tcl Parameter: NudrPolPreseEcgiListMnc_1_1

EUTRAN Cell Id.

Enter the EUTRAN Cell ID. Enter 7 Hex digits.

Tcl Parameter: NudrPolPreseEcgiListEutraCellId_1_1

Global RAN Node ID List

Select to enter the Global RAN Node ID Lists (up to 4).

Tcl Parameter: NudrPolPreseIncGRanNodeListEn_1

Tcl Parameter: NudrPolPreseIncGRanNodeListNum_1

MCC MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NudrPolPreseGRanNodeListMcc_1_1

Tcl Parameter: NudrPolPreseGRanNodeListMnc_1_1

N3IWF NG RAN Node

Enter the N3IWF (Non-3GPP Inter-Working Function Identifier) and the NG RAN Node (Non-3GPP RAN Node Id).

N3IWF and NG RAN Node are mutually exclusive.

Select the NG RAN Node Type : gNB, MacroNGeNB, LMacroNGeNB, SMacroNGeNB

Tcl Parameter: NudrPolPreseGRanNodeListN3wifEn_1_1

Tcl Parameter: NudrPolPreseGRanNodeListN3wif_1_1

Tcl Parameter: NudrPolPreseGRanNodeListNgRanNodEn_1_1

Tcl Parameter: NudrPolPreseGRanNodeListNgRanNod_1_1

Tcl Parameter: NudrPolPreseGRanNodeListNgRanNodId_1_1

 

 

 

Subscriber Categories

Subscriber Categories

Enter the Subscriber Categories.

Select Enable Subscriber Categories and enter a list of categories associated with the subscriber.

Tcl Parameter: NudrPolEnSubscCat

Number of Categories

Enter up to 8 categories associated with the subscriber.

Range : 0 to 8

Default: 0

Tcl Parameter: NudrPolNumSubscCats

Category

Enter a string value to describe a category associated with the subscriber.

Tcl Parameter: NudrPolSubscCat_1

 

Sm Policy

Enable SM Policy Snssai Data

Select to enable the capture of SM Policy data for a S-NSSAI.

Tcl Parameter: NudrPolEnSmPolicySnssaiData

Number of SM Policy S-NSSAI Data

Select the number of SM Policy data for a S-NSSAI.

Range: 1 to 8

Tcl Parameter: NudrPolNumSmPolicySnssaiData

SM Policy S-NSSAI

Sm Policy S-NSSAI

Enter the SM Policy data for a S-NSSAI (Single - Network Slice Selection Information).

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

SST SD  

Enter the S-NSSAI (Single - Network Slice Selection Information).

The S-NSSAI contains two components: the SST (Slice / Service Type) and an optional SD (Slice Differentiator).

Range of SST : 0 to 255, default : 0

Range of SD : 1 to 6 Hex Characters , Default : 000000

Tcl Parameter: NudrPolSpsdSst_1_1

Tcl Parameter: NudrPolSpsdSdEn_1

Tcl Parameter: NudrPolSpsdSd_1

Number of DNNs

Enter the number of DNNs.

Range: 0 to 8

Default : 0

Tcl Parameter: NudrPolSpsdSpsdNumDnnData_1

DNN

Enter DNN Description.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Triggering of notification of policy data SmPolicyDnnData changes (subscSpendingLimits changes to FALSE from TRUE) sending from the emulated UDR to PCF SUT during an ongoing PDU session.

3GPP TS 29.519 Clause 5.4.2.15, subscSpendingLimits indicates whether the PCF must enforce policies based on subscriber spending limits. 

Up to 63 characters.

Default : dnn

Tcl Parameter: NudrPolSpsdSpddDnn_1_1

Tcl Parameter: NudrPolSpsdSpddUpdDnn_1_1

IPv4 Index

Select to enter a IPv4 Index. Used to identify which IP pool or external server is used to allocated the IPv4 address.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range: 0 to 65535

Default : 0

Tcl Parameter: NudrPolSpsdSpddIpv4IndexEn_1_1

Tcl Parameter: NudrPolSpsdSpddIpv4Index_1_1

Tcl Parameter: NudrPolSpsdSpddUpdIpv4IndexEn_1_1

Tcl Parameter: NudrPolSpsdSpddUpdIpv4Index_1_1

IPv6 Index

Select to enter a IPv6 Index. Used to identify which IP pool or external server is used to allocated the IPv6 address.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range: 0 to 65535

Default : 0

Tcl Parameter: NudrPolSpsdSpddIpv6IndexEn_1_1

Tcl Parameter: NudrPolSpsdSpddIpv6Index_1_1

Tcl Parameter: NudrPolSpsdSpddUpdIpv6IndexEn_1_1

Tcl Parameter: NudrPolSpsdSpddUpdIpv6Index_1_1

Enable GBR UL

Select to enter the Maximum aggregate GBR (Guaranteed Bit Rate) Uplink that can be provided across all GBR QoS Flows in the DNN.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range : 1 to 65535

Default : 1

Select bps (default), Kbps, Mbps, Gbps, Tbps

Tcl Parameter: NudrPolSpsdSpddEnGbrUL_1_1

Tcl Parameter: NudrPolSpsdSpddGbrUL_1_1

Tcl Parameter: NudrPolSpsdSpddGbrULUnit_1_1

Tcl Parameter: NudrPolSpsdSpddUpdEnGbrUL_1_1

Tcl Parameter: NudrPolSpsdSpddUpdGbrUL_1_1

Tcl Parameter: NudrPolSpsdSpddUpdGbrULUnit_1_1

Enable GBR DL

Select to enter the Maximum aggregate GBR (Guaranteed Bit Rate) Downlink that can be provided across all GBR QoS Flows in the DNN.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range : 1 to 65535

Default : 1

Select bps (default), Kbps, Mbps, Gbps, Tbps

Tcl Parameter: NudrPolSpsdSpddEnGbrDL_1_1

Tcl Parameter: NudrPolSpsdSpddGbrDL_1_1

Tcl Parameter: NudrPolSpsdSpddGbrDLUnit_1_1

Tcl Parameter: NudrPolSpsdSpddUpdEnGbrDL_1_1

Tcl Parameter: NudrPolSpsdSpddUpdGbrDL_1_1

Tcl Parameter: NudrPolSpsdSpddUpdGbrDLUnit_1_1

Subscriber Spending Limits

Select to enable Subscriber spending limits. Indicates whether the PCF must enforce policies based on subscriber spending limits.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Tcl Parameter: NudrPolSpsdSpddSubsSpendLimits_1_1

Tcl Parameter: NudrPolSpsdSpddUpdSubsSpendLimits_1_1

ADC Support

Select to enable ADC support. Indicates whether application detection and control can be enabled for a subscriber.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Tcl Parameter: NudrPolSpsdSpddAddSupport_1_1

Tcl Parameter: NudrPolSpsdSpddUpdAddSupport_1_1

MPS Priority

Select to enable MPS priority. Indicates subscription to the MPS priority service; priority applies to all traffic on the PDU session.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Tcl Parameter: NudrPolSpsdSpddMpsPriority_1_1

Tcl Parameter: NudrPolSpsdSpddUpdMpsPriority_1_1

Offline Online

Select to enable Offline and Online. Indicates the Offline/online charging is applicable to the PDU session.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Tcl Parameter: NudrPolSpsdSpddOffline_1_1

Tcl Parameter: NudrPolSpsdSpddOnline_1_1

Tcl Parameter: NudrPolSpsdSpddUpdOffline_1_1

Tcl Parameter: NudrPolSpsdSpddUpdOnline_1_1

IMS Signaling Priority

Select to enable IMS Signaling priority.  Indicates subscription to the IMS Signaling priority service; priority only applies to IMS signalling traffic.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Tcl Parameter: NudrPolSpsdSpddImsSigPrio_1_1

Tcl Parameter: NudrPolSpsdSpddUpdImsSigPrio_1_1

MPS Priority Level

Select to enter the relative priority level for the Multimedia Priority Service (MPS).

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range : 0 to 65535

Default : 0

Tcl Parameter: NudrPolSpsdSpddEnMpsPriLvl_1_1

Tcl Parameter: NudrPolSpsdSpddMpsPriLvl_1_1

Tcl Parameter: NudrPolSpsdSpddUpdEnMpsPriLvl_1_1

Tcl Parameter: NudrPolSpsdSpddUpdMpsPriLvl_1_1

Charging Info Primary CHF Address Secondary CHF Address

Select to enter the Primary and the Secondary address of the Charging Function.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Enter up to 128 characters.

Default : http://www.3gpp.org/ftp/Specs

Tcl Parameter: NudrPolSpsdSpddEnPrimChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddPrimChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddEnSecChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddSecChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddUpdEnPrimChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddUpdPrimChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddUpdEnSecChfAddr_1_1

Tcl Parameter: NudrPolSpsdSpddUpdSecChfAddr_1_1

Allowed Services

Select to enter a list of subscriber's allowed service identifiers.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range: 0 to 8

Default : 0

Tcl Parameter: NudrPolSpsdSpddAllowServ_1_1

Tcl Parameter: NudrPolSpsdSpddAllowServNum_1_1_1

Tcl Parameter: NudrPolSpsdSpddUpdAllowServ_1_1

Tcl Parameter: NudrPolSpsdSpddUpdAllowServNum_1_1_1

Number of Reference UDM Limit IDs   Limit ID To Monitoring Key 1

Select to enter a reference to the "UsageMonitoringDataLimit" or "UsageMonitoringData" instances for this DNN and S-NSSAI that may include the related monitoring key (s). The key of the map is the limit identifier.

Available in both the SM Policy DNN Data and SM Policy DNN Data Update panes.

Range: 0 to 8

Default : 0

Enter Limit ID for each DNN.

Enter # of Keys for each DNN. Range: 0 to 8, default : 0

Tcl Parameter: NudrPolSpsdSpddRefUdmLimitIdsNum_1_1

Tcl Parameter: NudrPolSpsdSpddRefUdmLimitId_1_1_1

Tcl Parameter: NudrPolSpsdSpddRefUdmMonKeysNum_1_1_1

Tcl Parameter: NudrPolSpsdSpddRefUdmMonKey_1_1_1

Tcl Parameter: NudrPolSpsdSpddUpdRefUdmLimitIdsNum_1_1

Tcl Parameter: NudrPolSpsdSpddUpdRefUdmLimitId_1_1_1

Tcl Parameter: NudrPolSpsdSpddUpdRefUdmMonKeysNum_1_1_1

Tcl Parameter: NudrPolSpsdSpddUpdRefUdmMonKey_1_1_1

 

 

 

Usage Monitor Data Limits

 

Usage Monitor Data Limits

Select Enable Usage Monitor Data Limits to enable the capture of Usage Monitor Data limits.  

Select Number of Usage Monitor Data Limits.

Range : 1 to 4

Default : 1

Tcl Parameter: NudrPolUmdlEn

Tcl Parameter: NudrPolUmdlNum

Limit ID

Enter the limit id. Identifies the limit, i.e. the usage monitoring control instance.

Unrestricted text field.

Tcl Parameter: NudrPolUmdlLimitId_1

Usage Monitor Level

Select the usage monitor level. (PDU Session level or per Service).

SESSION-LEVEL, SERVICE-LEVEL

Options: SESSION-LEVEL, SERVICE-LEVEL

Tcl Parameter: NudrPolUmdlUmLevel_1

Start Date

Enter the start date.  

Per RFC 3339 format.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date/Time Format: YYYY-MM-DDTHH:MM:SS[time-offset options]

Tcl Parameter: NudrPolUmdlStartDate_1

End Date

Enter the end date.  

Per RFC 3339 format.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date/Time Format: YYYY-MM-DDTHH:MM:SS[time-offset options]

Tcl Parameter: NudrPolUmdlEndDate_1

Reset Time Report

Select to enter the reset time report Period and Maximum number of period.

Select Period.

Options : YEARLY, MONTHLY, WEEKLY, DAILY, HOURLY

Enter Maximum number of period.

Range : 1 to 4294967295

Tcl Parameter: NudrPolUmdlPeriod_1

Tcl Parameter: NudrPolUmdlMaxNumPeriod_1

Usage Threshold Duration (s)

Select to enter the Duration for Usage Monitor Data in seconds.

Range : 0 to 4294967295

Default : 1

Tcl Parameter: NudrPolUmdlDurationEn_1

Tcl Parameter: NudrPolUmdlDuration_1

Usage Threshold Total Volume (octets)

Select to enter the total Volume for Usage Monitor Data in octets.

Range : 0 to 42949672950000

Default : 1

Tcl Parameter: NudrPolUmdlTotVolEn_1

Tcl Parameter: NudrPolUmdlTotVol_1

Usage Threshold Uplink Volume (octets)

Select to enter the Uplink Volume for Usage Monitor Data in octets.

Range : 0 to 42949672950000

Default : 1

Tcl Parameter: NudrPolUmdlUlVolEn_1

Tcl Parameter: NudrPolUmdlUlVol_1

Usage Threshold Downlink Volume (octets)

Select to enter the Downlink Volume for Usage Monitor Data in octets.

Range : 0 to 42949672950000

Default : 1

Tcl Parameter: NudrUmdlDlVolEn_1

Tcl Parameter: NudrlmdDlVol_1

 

Usage Monitor Data

 

Usage Monitor Data

Select Enable Usage Monitor Data to enable the capture of Usage Monitor Data.  

Select Number of Usage Monitor Profiles.

Range : 1 to 4

Default : 1

Tcl Parameter: NudrPolUsageMonDataEn

Tcl Parameter: NudrPolUsageMonDataNum

Limit ID

Enter the limit id. Identifies the limit, i.e. the usage monitoring control instance.

Unrestricted text field.

Tcl Parameter: NudrPolUmdLimitId_1

Usage Monitor Level

Select the usage monitor level. (PDU Session level or per Service).

SESSION-LEVEL, SERVICE-LEVEL

Options: SESSION-LEVEL, SERVICE-LEVEL

Tcl Parameter: NudrUmdPolUsageMonLevel_1

Reset Time

Select to enter the reset time. Time to reset the allowed usage back to the usageLimit of the corresponding UsageMonDataLimit. The allowedUsage is only applicable if the resetTime is in the future relative to the current time.

Per RFC 3339 format. Date/Time Format: YYYY-MM-DDTHH:MM:SS[time-offset options]

Tcl Parameter: NudrPolUmdResetTimeEn_1

Tcl Parameter: NudrPolUmdResetTime_1

Usage Threshold Duration (s)

Select to enter the Duration for Usage Monitor Data in seconds.

Range : 0 to 4294967295

Default : 1

Tcl Parameter: NudrPolUmdDurationEn_1

Tcl Parameter: NudrPolUmdDurationVol_1

Usage Threshold Total Volume (octets)

Select to enter the total Volume for Usage Monitor Data in octets.

Range : 0 to 42949672950000

Default : 1

Tcl Parameter: NudrPolUmdTotVolEn_1

Tcl Parameter: NudrPolUmdTotVol_1

Usage Threshold Uplink Volume (octets)

Select to enter the Uplink Volume for Usage Monitor Data in octets.

Range : 0 to 42949672950000

Default : 1

Tcl Parameter: NudrPolUmdUlVolEn_1

Tcl Parameter: NudrPolUmdUlVol_1

Usage Threshold Downlink Volume (octets)

Select to enter the Downlink Volume for Usage Monitor Data in octets.

Range : 0 to 42949672950000

Default : 1

Tcl Parameter: NudrPolUmdDlVolEn_1

Tcl Parameter: NudrPolUmdDlVol_1

 

^ Back to Top