Gmlc To Amf NF Tab


The Gmlc To Amf NF (Network Function) Consumer tab is available when GMLC (Ngmlc) is selected on Service Based Node test case. About the 5G Application.

Per 3GPP TS 23.501, 23.502 and 23.273.

NF Consumer

NF Consumer

 


NF Consumer

Available when GMLC (Ngmlc) is selected on Service Based Node test case on Interface GMLC-AMF.

Namf Version (29.518)

 Available when GMLC (Ngmlc) is selected on Service Based Node test case on Interface GMLC-AMF.

Options: 15.2.0/Dec2018 (default for Service Based test case)

Tcl Parameter: NlgNamfSbiVersion

Use Access Token

Select “Use Access Token” option to support OAuth2 authorization for NF Consumer.

Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF  per spec TS 29.510 V16.3.0 section 5.4.2.2.1.

Select to enter Access Token. Enter up to 1023 characters

Tcl Parameter: NlgNamfUseAccTokEn

Tcl Parameter: NlgNamfAccTokEn

Tcl Parameter: NlgNamfAccTok

Start Time (s)

Enter the Start Time in seconds. Used to control the delay time when to start NamfConsumerSessions in GMLC.

Range : 0 to 65535

Default : 5

Tcl Parameter: NlgNamfStartTime

Start Rate (subscribers/s)

Enter the Start Rate in subscribers per seconds. Used to control the NamfConsumerSession start rate.

Range : .001 to 1000

Default : 1.0

Tcl Parameter: NlgNamfStartRate

Request Position Info

Select to Request Position Information. The Request Position Pane becomes available for input.

Tcl Parameter: NlgNamfReqPosInfoEn

LCS Client Type

Select the LCS Client Type. Available when Request Position Info is enabled.

Options : EMERGENCY SERVICES, VALUE ADDED SERVICES, PLMN OPERATOR SERVICES, LAWFUL INTERCEPT SERVICES, PLMN OPERATOR BROADCAST SERVICES, PLMN OPERATOR OM, PLMN OPERATOR ANONYMOUS STATISTICS, PLMN OPERATOR TARGET MS SERVICE SUPPORT

Tcl Parameter: NlgNamfLcsCliType

LCS Location

Select the LCS Location. Available when Request Position Info is enabled.

Options : CURRENT LOCATION, CURREBT OR_LAST KNOWN LOCATION, INITIAL LOCATION

Tcl Parameter: NlgNamfLcsLoc

Priority

Select the Priority. Available when Request Position Info is enabled.

Options : HIGHEST_PRIORITY, NORMAL_PRIORITY

Tcl Parameter: NlgNamfPriorityEn

Tcl Parameter: NlgNamfPriority

Velocity Requested

Select to enter the Velocity Requested.

Options : VELOCITY_IS_NOT_REQUESTED (Default), VELOCITY_IS_REQUESTED,

Tcl Parameter: NlgNamfVelReqEn

Tcl Parameter: NlgNamfVelReq

LCS Supported GAD Shapes

Select the LCS Supported GAD Shapes for input pane to allow selection of the following supported shapes.

Options : POINT, POINT UNCERTAINTY CIRCLE, POINT UNCERTAINTY ELLIPSE, POLYGON, POINT ALTITUDE, POINT ALTITUDE UNCERTAINTY, ELLIPSOID ARC

Tcl Parameter: NlgNamfLcsSupGADShapesEn

Tcl Parameter: NlgNamfLcsSupGADShapes

Location QoS

Select Location QoS and the Location details. Available when Request Position Info is enabled.

Horizontal Accuracy  

Select to enter the Horizontal Accuracy.

Range : 0 to 1.7976931348623157E308

Default: 0.5

Tcl Parameter: NlgNamfHorAccEn

Tcl Parameter: NlgNamfHorAcc

Vertical Accuracy

Select to enter the Vertical Accuracy.

Range : 0 to 1.7976931348623157E308

Default: 0.5

Tcl Parameter: NlgNamfVerAccEn

Tcl Parameter: NlgNamfVerAcc

Vertical Accuracy Requested

Select to indicate Vertical Accuracy requested.

Options : No , Yes

Tcl Parameter: NlgNamfVerAccReqEn

Tcl Parameter: NlgNamfVerAccReq

Response Time

Select to indicate Response Time.

Options : LOW_DELAY (default), DELAY_TOLERANT

Tcl Parameter: NlgNamfRespTimeEn

Tcl Parameter: NlgNamfRespTime

 

 

 

^ Back to Top