Amf to Nwdaf NF Tab
Click here to see this page in full context

Landslide Performance Test System – Release 24.3 September 2024

Amf to Nwdaf NF Tab

The Amf to Nwdaf (Network data analytics function) NF (Network Function) Consumer tab is available when Test NWDAF (Nnwdaf)  and From AMF or From AMF are selected on the Service Based Nodal test case.  About the 5G Application.

Spec reference : 3GPP TS 29.520, 3GPP TS 29.510, 3GPP TS 23.288 (release 16.6.0 (2020-12)).

Measurements collected for Service Based Node and Nodal related processing are reported on the related Consumer / Producer report tab.

NF Consumer

 

Event Subscription / Analytics Information

Event Subscription / Analytics Information

 

 

 

 

 

Event Subscription / Analytics Information

Event Subscription / Analytics Information

 

 

Nnwdaf Version (29.520)

 

Select the Nnwdaf Version.

 Options: 16.6.0/Dec2020 (default)

 Tcl Parameter: NamfNnwdafSbiVersion

Use Access Token

Select “Use Access Token” option to support OAuth2 authorization for NF Consumer.

Support for Nnrf_AccessToken Service to the Service Base Nodal /Node NRF per spec TS 29.510 V16.3.0 section 5.4.2.2.1.

Select to enter Access Token. Enter up to 1023 characters

Tcl Parameter: NamfNnwdafUseAccTokEn

Tcl Parameter: NamfNnwdafAccTokEn

Tcl Parameter: NamfNnwdafAccTok

Events Subscription / Analytics Information

Most Data fields are available in both Event Subscription and Analytics Information panes. When a data field is only available in one pane, it is noted below. 

Enable Analytics Information Requests

Select to enable analytics Information Requests. Available when Analytics Information is enabled.

Tcl Parameter: NamfNnwdafAnaEn

Supported Features

Enter the supported features.

Range : up to 8 hex characters

Default : 1ff

Tcl Parameter: NamfNnwdafEvtsSuppFeat

Tcl Parameter: NamfNnwdafAnaSuppFeat
Number of Subscriptions

Enter the Number of Subscriptions. Available when Events Subscription is enabled. 

Range : 1 to 4

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubNum
Subscription Rate (Subscription/s)

Enter the Subscription Rate in Subscription per seconds. Available when Events Subscription is enabled. 

Range : 0.001 to 3000.0

Default : 1.0

Tcl Parameter: NamfNnwdafEvtsSubRate
Number of Requests

Enter the Number of Requests. Available when Analytics Information is enabled.

Range : 1 to 4

Default : 1

Tcl Parameter: NamfNnwdafAnaReqNum
Request Rate (Request/s)

Enter the Request Rate in Request per seconds. Available when Analytics Information is enabled.

Range : 0.001 to 3000.0

Default : 1.0

Tcl Parameter: NamfNnwdafAnaReqRate

Transaction Setting

 

Continuous

Transaction Count

Select the Transaction Setting.

Options : Continuous or Transaction Count

When Transaction Count is selected, enter the Count.

Range : 1 to 4294967295

Default : 1

Tcl Parameter: NamfNnwdafEvtsTransCntEn

Tcl Parameter: NamfNnwdafEvtsTransContEn

Tcl Parameter: NamfNnwdafEvtsTransCont

Tcl Parameter: NamfNnwdafAnaTransCntEn

Tcl Parameter: NamfNnwdafAnaTransContEn

Tcl Parameter: NamfNnwdafAnaTransCont

Subscription

Subscribe

Enter the Subscribe Delay Time in milliseconds. Available when Events Subscription is enabled. 

Range : 1 to 2147483647

Default : 1000

Select Event Reporting Requirement to configure Event Reporting Requirement for subscribe.

Click on Subscribe Events Setting for Pop-up to configure the Subscribe Events Settings.

Select Immediate Reporting Indication - Options : False (default), True

Select Notification Method - Options : PERIODIC (default), ONE_TIME, ON_EVENT_DETECTION

Enter the Max Reports. Range : 1 to 999999, default = 1

Enter the Report Period (s). Range : 1 to 999999, default = 10

Enter the Sampling Ratio (%). Range : 1 to 100, default = 1

Enter the Group Report Time (s). Range : 1 to 999999, default = 10

Select to include the Expiry Time. Format per RFC 3339.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options]

Max of 64 characters.

Select to enter the Relative Expiry Time in seconds.

Range: 10 to 999999

Default : 10

Tcl Parameter: NamfNnwdafEvtsSubDelay_1

Tcl Parameter: NamfNnwdafEvtsSubEvtReqEn_1

Tcl Parameter: NamfNnwdafEvtsSubImRptIndEn_1

Tcl Parameter: NamfNnwdafEvtsSubImRptInd_1

Tcl Parameter: NamfNnwdafEvtsSubNtfMethodEn_1

Tcl Parameter: NamfNnwdafEvtsSubNtfMethod_1

Tcl Parameter: NamfNnwdafEvtsSubMaxRptsEn_1

Tcl Parameter: NamfNnwdafEvtsSubMaxRpts_1

Tcl Parameter: NamfNnwdafEvtsSubRptPeriodEn_1

Tcl Parameter: NamfNnwdafEvtsSubRptPeriod_1

Tcl Parameter: NamfNnwdafEvtsSubSampRatioEn_1

Tcl Parameter: NamfNnwdafEvtsSubSampRatio_1

Tcl Parameter: NamfNnwdafEvtsSubGrpRptTimeEn_1

Tcl Parameter: NamfNnwdafEvtsSubGrpRptTime_1

Tcl Parameter: NamfNnwdafEvtsSubIncExpTimeEn_1

Tcl Parameter: NamfNnwdafEvtsSubExpTime_1

Tcl Parameter: NamfNnwdafEvtsSubExpTimeOptions_1

Tcl Parameter: NamfNnwdafEvtsSubRelExpTime_1

Subscription

Update

Enter the Update Delay Time in milliseconds. Available when Events Subscription is enabled. 

Range : 1 to 2147483647

Default : 1000

Select Event Reporting Requirement to configure Event Reporting Requirement for subscribe.

Click on Update Events Setting for Pop-up to configure the Update Events Settings.

Select Immediate Reporting Indication - Options : False (default), True

Select Notification Method - Options : PERIODIC (default), ONE_TIME, ON_EVENT_DETECTION

Enter the Max Reports. Range : 1 to 999999, default = 1

Enter the Report Period (s). Range : 1 to 999999, default = 10

Enter the Sampling Ratio (%). Range : 1 to 100, default = 1

Enter the Group Report Time (s). Range : 1 to 999999, default = 10

Select to include the Expiry Time. Format per RFC 3339.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options]

Max of 64 characters.

Select to enter the Relative Expiry Time in seconds.

Range: 10 to 999999

Default : 10

Tcl Parameter: NamfNnwdafEvtsUpdDelay_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtReqEn_1

Tcl Parameter: NamfNnwdafEvtsUpdImRptIndEn_1

Tcl Parameter: NamfNnwdafEvtsUpdImRptInd_1

Tcl Parameter: NamfNnwdafEvtsUpdNtfMethodEn_1

Tcl Parameter: NamfNnwdafEvtsUpdNtfMethod_1

Tcl Parameter: NamfNnwdafEvtsUpdMaxRptsEn_1

Tcl Parameter: NamfNnwdafEvtsUpdMaxRpts_1

Tcl Parameter: NamfNnwdafEvtsUpdRptPeriodEn_1

Tcl Parameter: NamfNnwdafEvtsUpdRptPeriod_1

Tcl Parameter: NamfNnwdafEvtsUpdSampRatioEn_1

Tcl Parameter: NamfNnwdafEvtsUpdSampRatio_1

Tcl Parameter: NamfNnwdafEvtsUpdGrpRptTimeEn_1

Tcl Parameter: NamfNnwdafEvtsUpdGrpRptTime_1

Tcl Parameter: NamfNnwdafEvtsUpdIncExpTimeEn_1

Tcl Parameter: NamfNnwdafEvtsUpdExpTime_1

Tcl Parameter: NamfNnwdafEvtsUpdExpTimeOptions_1

Tcl Parameter: NamfNnwdafEvtsUpdRelExpTime_1
Request Delay (s)

Enter the request delay in milliseconds.

Available when the Analytics Information pane is enabled.

Range : 1 to 4294967295

Default : 1000

Tcl Parameter: NamfNnwdafAnaReqDelay_1
Include Supported Features

Select to include the supported features.

Available when the Analytics Information pane is enabled.

Tcl Parameter: NamfNnwdafAnaReqIncSuppFeat_1
Analytics Reporting Requirement

Select to include the Analytics Reporting Requirement. Available when the Analytics Information pane is enabled.

Select Accuracy - Options : LOW (default), HIGH

Select to enter the Sampling Ratio (%). Range : 1 to 100, default = 1

Select to enter the Max SUPIs. Range : 1 to 999999, default = 1

Select to enter the Max Objects. Range : 1 to 999999, default = 1

Select to include the Observation Start Time / Observation End Time / Analytics Info Needed Time. Format per RFC 3339.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options]

Max of 64 characters.

Select to enter the Relative Time in seconds.

Range: 10 to 999999

Default : 10

Tcl Parameter: NamfNnwdafAnaReqRptReqEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqAccuEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqAccu_1

Tcl Parameter: NamfNnwdafAnaReqRptReqStartTsEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqStartTs_1

Tcl Parameter: NamfNnwdafAnaReqRptReqTimeOptions_1

Tcl Parameter: NamfNnwdafAnaReqRptReqRelStartTs_1

Tcl Parameter: NamfNnwdafAnaReqRptReqEndTsEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqEndTs_1

Tcl Parameter: NamfNnwdafAnaReqRptReqEndTimeOptions_1

Tcl Parameter: NamfNnwdafAnaReqRptReqRelEndTs_1

Tcl Parameter: NamfNnwdafAnaReqRptReqSampRatioEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqSampRatio_1

Tcl Parameter: NamfNnwdafAnaReqRptReqMaxSupisEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqMaxSupis_1

Tcl Parameter: NamfNnwdafAnaReqRptReqMaxObjsEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqMaxObjs_1

Tcl Parameter: NamfNnwdafAnaReqRptReqAnaNeedTsEn_1

Tcl Parameter: NamfNnwdafAnaReqRptReqAnaNeedTsTimeOptions_1

Tcl Parameter: NamfNnwdafAnaReqRptReqAnaNeedTs_1

Tcl Parameter: NamfNnwdafAnaReqRptReqRelAnaNeedTs_1

Unsubscribe

Subscription Expiry Time (ms)

Enter the Subscription Expiry Time in milliseconds. Available when Events Subscription is enabled. 

If Update is enabled, the expiry timer is started when Update is complete, or it's started when Subscribe is complete.

Range : 1 to 2147483647

Default : 1000

Tcl Parameter: NamfNnwdafEvtsUnsubExpTime_1

Subscribe Events Settings 

Update Events Settings

The Subscribe Events Settings and Update Events Settings pop-up panels are the same where the only change is the prefix for all TCL variable names. Subscribe events begin with prefix "NamfNnwdafEvtsSub". Update events begin prefix "NamfNnwdafEvtsUpd" for all TCL variables. 

In addition, many of the data fields listed below are also available in the Analytics Information Pane. The only change is the prefix for all TCL variable names begin with prefix "NamfNnwdafAnaReq"

Subscribe Event Settings

 

Update Event Settings

 

Analytics Information 

Event Filter

Select the Number of Events.

Range : 1 to 4

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubsEvtNum_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNum_1

Event ID

Select the Event ID.

Options : NF_LOAD, QOS_SUSTAINABILITY, SLICE_LOAD_LEVEL, SERVICE_EXPERIENCE, 

UE_MOBILITY, UE_COMM, ABNORMAL_BEHAVIOUR, USER_DATA_CONGESTION, 

NETWORK_PERFORMANCE, NSI_LOAD_LEVEL

Default : NF_LOAD

Tcl Parameter: NamfNnwdafEvtsSubEvtId_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtId_1

Tcl Parameter: NamfNnwdafEvtsAnaReqEvtId_1
Notification Method

Select to include the Notification Method.

Options : PERIODIC, THRESHOLD

Default = PERIODIC

Tcl Parameter: NamfNnwdafEvtsSubEvtNtfMethEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNtfMeth_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNtfMethEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNtfMeth_1_1
Any Slice Indication

Select Any Slice Indication.

Options : False, True

Default = False

Tcl Parameter: NamfNnwdafEvtsSubEvtAsiEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtAsi_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtAsiEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtAsi_1_1
Expected Analytics Type

Select the Expected Analytics Type.

Options : MOBILITY, COMMUN, MOBILITY_AND_COMMUN

Default = MOBILITY

Tcl Parameter: NamfNnwdafEvtsSubEvtExpAnaTypeEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpAnaType_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpAnaTypeEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpAnaType_1_1
Matching Direction

Select the Matching Direction.

Options : ASCENDING, DESCENDING, CROSSED

Default = ASCENDING

Tcl Parameter: NamfNnwdafEvtsSubEvtMatchDirEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtMatchDir_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtMatchDirEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtMatchDir_1_1
Repetition Period (s)

Select to enter the Repetition Period in seconds.

Range : 1 to 999999

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtRepPeriodEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtRepPeriod_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtRepPeriodEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtRepPeriod_1_1
Load Level Threshold

Select to enter the Load Level Threshold.

Range : 1 to 100

Default : 10

Tcl Parameter: NamfNnwdafEvtsSubEvtLoadLvlThEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtLoadLvlTh_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtLoadLvlThEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtLoadLvlTh_1_1
Event Filter

Available when Analytics Information is enabled. When enabled, many data fields become available for selection.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltEn_1
Application IDs

Select to enter up to 4 Application IDs for event setting.

Select number of Application IDs and enter the Application ID in the table provided.

Enter up to 64 characters for Application Id.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltAppIdsEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltAppIdNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltAppId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtAppIdsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtAppIdNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtAppId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtAppIdsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtAppIdNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtAppId_1_1_1
DNNs

Select to enter up to 4 DNNs (Data Network Name) for event setting.

Select number of DNNs and enter the DNN in the table provided.

Enter up to 64 characters for DNN.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltDnnsEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltDnnNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltDnn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtDnnsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtDnnNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtDnn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtDnnsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtDnnNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtDnn_1_1_1
DNAIs

Select to enter up to 4 DNAIs (Data Network Access Identifier) for event setting.

Select number of DNAIs and enter the DNAI in the table provided.

Enter up to 64 characters for DNAI.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltDnaisEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltDnaiNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltDnai_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtDnaisEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtDnaiNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtDnai_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtDnaisEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtDnaiNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtDnai_1_1_1
NF Set IDs

Select to enter up to 4 NF Set IDs for event setting.

Select number of NF Set IDs and enter the NF Set in the table provided.

Enter up to 64 characters for NF Set Id.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfSetIdsEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfSetIdNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfSetId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfSetIdsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfSetIdNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfSetId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfSetIdsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfSetIdNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfSetId_1_1_1
NF Types

Select to enter up to 4 NF Types for event setting.

Select number of NF Types and select the NF Type in the table provided.

Options : SMF, AMF, AUSF, UDM, UPF

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfTypesEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfTypeNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfType_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfTypesEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfTypeNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfType_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfTypesEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfTypeNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfType_1_1_1
NF Instance IDs

Select to enter up to 4 NF Instance IDs for event setting.

Select number of NF Instance IDs and enter the NF Instance in the table provided.

Enter the NF Instance in UUID version 4 format string. 

Example : f81d4fae-7dec-11d0-a765-00a0c91e6bf6

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfInstEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfInstNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNfInst_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfInstEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfInstNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfInst_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfInstEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfInstNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfInst_1_1_1
NSI Level Thresholds

Select to enter up to 4 NSI (Network Slice Instance) Level Thresholds for event setting.

Select number of NSI Level Thresholds and enter the Load Threshold in the table provided.

Range : 1 to 100 

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiLvlThsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiLvlThNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiLvlThs_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiLvlThsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiLvlThNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiLvlThs_1_1_1

Congestion  Threshold

Levels

Select to enter up to 4 Congestion Threshold Levels for event setting.

Select number of Threshold Levels and enter the Congestion Level in the table provided.

Range : 1 to 100 

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtCongLvlThEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtCongLvlThNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtCongLvlTh_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtCongLvlThEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtCongLvlThNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtCongLvlTh_1_1_1
RAN UE Throughput Thresholds

Select to enter up to 4 RAN UE Throughput Thresholds for event setting.

Select number of Throughput Thresholds and enter the Value and Unit in the table provided.

Value Range : 1 to 4294967295

Unit Options : bps, Kbps, Mbps (default), Gbps, Tbps

Tcl Parameter: NamfNnwdafEvtsSubEvtRanUeThrouThsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtRanUeThrouThNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtRanUeThrouThValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtRanUeThrouThUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtRanUeThrouThsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtRanUeThrouThNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtRanUeThrouThValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtRanUeThrouThUnit_1_1_1
SNSSAIs

Select to enter up to 4 SNSSAIs (Single - Network Slice Selection Assistance Information) or event setting.

Select number of SNSSAIs and enter the SST and SD in the table provided.

SST (Slice / Service Type) : 0 up to 255

SD (Slice Differentiator) : hex-string, maximum length = 6 (optional)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltSnssaisEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltSnssaiNum_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltSnssaiSst_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltSnssaiDs_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtSnssaisEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtSnssaiNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtSnssaiSst_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtSnssaiDs_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtSnssaisEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtSnssaiNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtSnssaiSst_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtSnssaiDs_1_1_1
NF Load Threshold Levels

Select to enter up to 4 NF Load Threshold Levelss for event setting.

Select number of Threshold Levels and enter the NF Load Level, NF CPU Usage (%), NF Memory Usage (%), NF Storage Usage (%).

Select NF Load Level. Range : 1 to 100 , default : 1

Select NF CPU Usage percentage (%). Range : 1 to 100 , default : 1

Select NF Memory Usage percentage (%). Range : 1 to 100 , default : 1

Select NF Storage Usage percentage (%). Range : 1 to 100 , default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlLdLvlEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlLdLvl_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlCpuEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlCpu_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlMemEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlMem_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlStorEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNfLdThLvlStor_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlLdLvlEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlLdLvl_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlCpuEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlCpu_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlMemEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlMem_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlStorEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNfLdThLvlStor_1_1_1
Exception IDs

Available when Analytics Information is enabled.

Enable Exception IDs and select any or all the following:

UNEXPECTED_UE_LOCATION, UNEXPECTED_LONG_LIVE_FLOW, UNEXPECTED_LARGE_RATE_FLOW

UNEXPECTED_WAKEUP, SUSPICION_OF_DDOS_ATTACK, WRONG_DESTINATION_ADDRESS, 

TOO_FREQUENT_SERVICE_ACCESS, UNEXPECTED_RADIO_LINK_FAILURES, PING_PONG_ACROSS_CELLS.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdsEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdUulEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdUllfEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdUlrfEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdUwEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdSdaEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdWdaEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdTfsaEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdUrlfEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExIdPpacEn_1
Network Performance Types

Available when Analytics Information is enabled.

Enable Network Performance Types and select any or all the following Network Performance Types:

GNB_ACTIVE_RATIO, GNB_COMPUTING_USAGE, GNB_MEMORY_USAGE, GNB_DISK_USAGE

NUM_OF_UE, SESS_SUCC_RATIO, HO_SUCC_RATIO

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypesEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypeGcuEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypeGmuEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypeGduEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypeNouEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypeSsrEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNwPerfTypeHsrEn_1
Any Slice Indication

Available when Analytics Information is enabled.

Select Any Slice Indication and choose False or True.

Default : False

Tcl Parameter: NamfNnwdafAnaReqEvtFiltAsiEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltAsi_1
Expected Analytics Type

Available when Analytics Information is enabled.

Enable Expected Analytics Types and select one of the options.

Options : MOBILITY, COMMUN, MOBILITY_AND_COMMUN

Default : MOBILITY

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpAnaTypeEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpAntType_1
NSI ID Infos

Select to enter up to 4 NSI (Network Slice Instance) ID Infos for event setting.

Select number of NSI ID Infos and enter the SST, SD, NSI IDs in the table provided.

SST (Slice / Service Type) : 0 up to 255

SD (Slice Differentiator) : hex-string, maximum length = 6 (optional)

Select NSI Ids to enter up to 4 NSI IDs.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfosEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfoNum_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfoSst_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfoSd_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfoIdEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfoIdNum_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNsiIdInfoId_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfosEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfoNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfoSst_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfoSd_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfoIdEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfoIdNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNsiIdInfoId_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfosEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfoNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfoSst_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfoSd_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfoIdEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfoIdNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNsiIdInfoId_1_1_1_1

Network Area

 

Tracking Area List

 

ECGI List

 

NCGI List

 

Global RAN Node ID List

Select Network Area to enter Tracking Area List, ECGI List,  NCGI List, and Global RAN Node ID List.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaEn_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaEn_1_1

Select to enter Tracking Area List details.

Select to enter the Number of TACs (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncTacListEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncTacListNum_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncTacListEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncTacListNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncTacListEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncTacListNum_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncTacListMcc_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncTacListMnc_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncTacListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncTacListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncTacListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncTacListMnc_1_1_1
TAC

Enter the Tracking Area Code (TAC). Enter 4 to 6 Hex digits.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncTacListTac_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncTacListTac_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncTacListTac_1_1_1

 

Select to enter NCGI List details.

Select to enter the Number of NCGIs - New Radio Cell Global Identifier (NCGI) (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncNcgiListEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncNcgiListNum_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncNcgiListEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncNcgiListNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncNcgiListEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncNcgiListNum_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncNcgiListMcc_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncNcgiListMnc_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncNcgiListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncNcgiListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncNcgiListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncNcgiListMnc_1_1_1
NR Cell ID

Enter the New Radio (NR) Cell ID. Enter 9 Hex digits.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncNcgiListNrCellId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncNcgiListNrCellId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncNcgiListNrCellId_1_1_1

 

Select to enter ECGI List details.

Select to enter the Number of ECGIs - E-UTRA Cell Global Identifier (ECGI) (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncEcgiListEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncEcgiListNum_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncEcgiListEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncEcgiListNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncEcgiListEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncEcgiListNum_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncEcgiListMcc_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncEcgiListMnc_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncEcgiListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncEcgiListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncEcgiListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncEcgiListMnc_1_1_1
EUTRAN Cell ID

Enter the EUTRAN Cell ID. Enter 7 Hex digits.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncEcgiListEutraCellId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncEcgiListEutraCellId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncEcgiListEutraCellId_1_1_1

 

Select to enter Global RAN Node ID List details.

Select to enter the Number of Global RAN Nodes (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGRanNodeListEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGRanNodeListNum_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGRanNodeListEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGRanNodeListNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGRanNodeListEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGRanNodeListNum_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGRanNodeListMcc_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGranNodeListMnc_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGRanNodeListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGranNodeListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGRanNodeListMcc_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGranNodeListMnc_1_1_1

N3IWF

NG RAN Node

Enter the N3IWF (Non-3GPP Inter-Working Function Identifier) and the NG RAN Node (Non-3GPP RAN Node Id).

N3IWF and NG RAN Node are mutually exclusive.

Select the NG RAN Node Type : gNB, MacroNGeNB, LMacroNGeNB, SMacroNGeNB

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGranNodeListN3wifEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGranNodeListN3wif_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGranNodeListNgRanNodEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGranNodeListNgRanNodType_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltNaIncGranNodeListNgRanNodId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGranNodeListN3wifEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGranNodeListN3wif_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGranNodeListNgRanNodEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGranNodeListNgRanNodType_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNaIncGranNodeListNgRanNodId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGranNodeListN3wifEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGranNodeListN3wif_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGranNodeListNgRanNodEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGranNodeListNgRanNodType_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNaIncGranNodeListNgRanNodId_1_1_1
QoS Requirement

Select QoS Requirement to enter 5QI, GFBR (Uplink, Downlink), QoS Resource Type, Packet Delay Budget (ms) and Packet Error Rate.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequEn_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequEn_1_1

5QI

Select to enter the 5QI (5G QoS Identifier).

Range : 0 to 255

Default : 1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequ5qiEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequ5qi_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequ5qiEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequ5qi_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequ5qiEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequ5qi_1_1

GFBR

Uplink

Downlink  

Select to enter the Guaranteed Flow Bit Rate (GFBR) for Uplink and Downlink.

Range : 1 to 4294967295

Default : 1

Select the Unit - bps, Kbps, Mbps (default), Gbps, Tbps

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequGfbrEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequGfbrUlValue_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequGfbrUlUnit_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequGfbrDlValue_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequGfbrDlUnit_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequGfbrEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequGfbrUlValue_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequGfbrUlUnit_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequGfbrDlValue_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequGfbrDlUnit_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequGfbrEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequGfbrUlValue_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequGfbrUlUnit_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequGfbrDlValue_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequGfbrDlUnit_1_1
QoS Resource Type

Select to include the QoS Resource Type.

Options : NON_GBR (default), NON_CRITICAL_GBR, CRITICAL_GBR

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequQosResTypeEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequQosResType_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequQosResTypeEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequQosResType_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequQosResTypeEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequQosResType_1_1
Packet Delay Budget (ms)

Select to include the Packet Delay Budget in milliseconds.

Range : 1 to 4294967295

Default : 1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequPdbEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequPdb_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequPdbEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequPdb_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequPdbEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequPdb_1_1
Packet Error Rate

Select to include the Packet Error Rate.

Range : Pattern : [0-9]E-[0-9]

Default : 1E-0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequPerEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltQosRequPer_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequPerEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosRequPer_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequPerEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosRequPer_1_1
QoS Flow Retainability Thresholds

Select to include the QoS Flow Retainability Thresholds.

Select up to 4 Number of Thresholds.

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThsNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThsNum_1_1

Threshold

 

Released Flows Number

Release Time Unit

Released Flows Ratio (%)

For each Threshold, select the Released Flows Number and  Release Time Unit or Released Flows Ratio (%). 

Released Flows Number.  

Range : 1 to 4294967295

Default : 1

Released Time Unit.  

Options : MINUTE , HOUR, DAY 

Default : MINUTE

Released Flows Ratio (%).  

Range : 1 to 100

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThRelNumEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThsRelNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThsRelTu_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThRelRatioEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtQosFlowRetThsRelRatio_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThRelNumEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThsRelNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThsRelTu_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThRelRatioEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtQosFlowRetThsRelRatio_1_1_1
Extra Event Reporting Requirement

Select Extra Event Reporting Requirement and capture the following details. 

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqEn_1_1

Accuracy

Enable to select to the Accuracy of the extra event reporting requirement.

Options : LOW or HIGH

Default : LOW

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqAccuEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqAccu_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqAccuEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqAccu_1_1

Enable Observation Start Time  

Select to enable the Observation Start Time.

Select to include the Timestamp. Format per RFC 3339.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options]

Max of 64 characters.

Select to enter the Relative Time in seconds.

Range: 10 to 999999

Default : 10

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqStartTsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqStartTs_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqRelStartTs_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqStartTsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqStartTs_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqRelStartTs_1_1

Enable Observation End Time  

Select to enable the Observation End Time.

Select to include the Timestamp. Format per RFC 3339.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options]

Max of 64 characters.

Select to enter the Relative Time in seconds.

Range: 10 to 999999

Default : 10

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqEndTsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqEndTs_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqRelEndTs_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqEndTsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqEndTs_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqRelEndTs_1_1
Max SUPIS

Select to include the Max SUPIs.

Range : 1 to 999999

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqMaxSupisEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqMaxSupis_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqMaxSupisEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqMaxSupis_1_1
Max Objects

Select to include the Max Objects.

Range : 1 to 999999

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqMaxObjsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExtraRptReqMaxObjs_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqMaxObjsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExtraRptReqMaxObjs_1_1

 
Target UE Information

Select Target UE Information and capture the following details. 

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoEn_1_1

Any UE

Enable to indicate Any UE.

Options : False or True

Default : False

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoAnyUeEn_1

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoAnyUe_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoAnyUeEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoAnyUe_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoAnyUeEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoAnyUe_1_1
SUPIS

Select to include Up to 4 SUPIs in the table provided. Enter the # of SUPIs (up to 4).

Enter SUPI. 

Range : 14 or 15 digit string

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoSupiEn_1

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoSupiNum_1

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoSupi_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoSupiEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoSupiNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoSupi_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoSupiEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoSupiNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoSupi_1_1_1
Internal Group IDs

Select to include Up to 4 Interal Group IDs in the table provided. Enter the # of Group IDs (up to 4).

Enter Group ID. 

Range : max of 64 characters

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoGrpIdEn_1

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoGrpIdNum_1

Tcl Parameter: NamfNnwdafAnaReqTgtUeInfoGrpId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoGrpIdEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoGrpIdNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtTgtUeInfoGrpId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoGrpIdEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoGrpIdNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtTgtUeInfoGrpId_1_1_1
Network Performance Requirements

Select Network Performance Requirements and capture the following details. 

Enter the Number of Requirements. 

Range : 1 to 4

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtNwPerfRequsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNwPerfRequsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNwPerfRequNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNwPerfRequNum_1_1

Negative Performance Type

Select the negative performance type.

Options : GNB_ACTIVE_RATIO, GNB_COMPUTING_USAGE, GNB_MEMORY_USAGE,

GNB_DISK_USAGE, NUM_OF_UE, SESS_SUCC_RATIO, HO_SUCC_RATIO

Default : GNB_ACTIVE_RATIO

Tcl Parameter: NamfNnwdafEvtsSubEvtNwPerfRequType_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNwPerfRequType_1_1_1

Relative Ratio (%)

or

Absolute Number

Select to include the relative ratio percentage or absolute number. 

Enter relative ratio percentage.

Range : 1 to 100

Default : 1

Enter absolute number.

Range : 1 to 4294967295

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtNwPerfRequRelRatio_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNwPerfRequRelRatio_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtNwPerfRequAbsNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtNwPerfRequAbsNum_1_1_1
Exception Requirements

Select Exception Requirements and capture the following details. 

Enter the Number of Exceptions. 

Range : 1 to 4

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequsEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequNum_1_1

Exception ID

Select the exception ID.

Options : UNEXPECTED_UE_LOCATION, UNEXPECTED_LONG_LIVE_FLOW, UNEXPECTED_LARGE_RATE_FLOW,

UNEXPECTED_WAKEUP, SUSPICION_OF_DDOS_ATTACK, WRONG_DESTINATION_ADDRESS,

TOO_FREQUENT_SERVICE_ACCESS, UNEXPECTED_RADIO_LINK_FAILURES, PING_PONG_ACROSS_CELLS

Default : UNEXPECTED_UE_LOCATION

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequExId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequExId_1_1_1
Exception Level

Select to enter the exception level.

Range : 1 to 100 

Default : 1

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequExLvlEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequExLvl_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequExLvlEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequExLvl_1_1_1
Exception Trend

Select to enter the exception trend.

Options : UP, DOWN, UNKNOWN, STABLE

Default : UP

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequExTrendEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExRequExTrend_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequExTrendEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExRequExTrend_1_1_1
Bandwidth Requirements

Select Bandwidth Requirements and capture the following details. 

Enter the Number of Requirements. 

Range : 1 to 4

Default : 1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequsEn_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequsEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequNum_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequNum_1_1

Application ID

Enter the Application ID.

Range : up to 64 characters

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequAppId_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequAppId_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequAppId_1_1_1

Max Uplink Bandwidth

Max Downlink Bandwidth

Min Uplink Bandwidth

Min Downlink Bandwidth

Enter the Maximum and Minimum Uplink and Downlink bandwidth and unit.

Range : 1 to 4294967295

Default : 1

Unit : bps, Kbps, Mbps, Gbps, Tbps

Default :  Mbps

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMaxUlBwValue_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMaxUlBwUnit_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMaxDlBwValue_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMaxDlBwUnit_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMinUlBwValue_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMinUlBwUnit_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMinDlBwValue_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltBwRequMinDlBwUnit_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMaxUlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMaxUlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMaxDlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMaxDlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMinUlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMinUlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMinDlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtBwRequMinDlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMaxUlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMaxUlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMaxDlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMaxDlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMinUlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMinUlBwUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMinDlBwValue_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtBwRequMinDlBwUnit_1_1_1
Expected UE Behavior

Select Expected UE Behavior and capture the following details. 

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehEn_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehEn_1_1

Expected UE Behavior

Expected UE Behavior

Stationary Indication

Enable to select the Stationary Indication.

Options : STATIONARY, MOBILE 

Default : STATIONARY

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSiEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSi_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSiEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSi_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSiEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSi_1_1
Traffic Profile

Enable to select the Traffic Profile.

Options : SINGLE_TRANS_UL, SINGLE_TRANS_DL, DUAL_TRANS_UL_FIRST,

DUAL_TRANS_DL_FIRST, MULTI_TRANS

Default : SINGLE_TRANS_UL

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehTrafPfEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehTrafPf_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehTrafPfEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehTrafPf_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehTrafPfEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehTrafPf_1_1
Scheduled Communication Time

Enable to selct the Scheduled Communication Time.

Select the Days of Week. Select a certain day (s) or all. At least one day must be selected.

Options : MO (Monday), TU (Tuesday), WE (Wednesday), TH (Thursday),

FR (Friday), SA (Saturday), SU (Sunday)

Select the Start Time (UTC) and the End Time (UTC). String with format "partial-time" or "full-time" as defined in clause 5.6 of IETF RFC 3339. 

Examples: "20:15:00", "20:15:00-08:00" (for 8 hours behind UTC).

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowMo_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowTu_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowWe_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowTh_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowFr_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowSa_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowSu_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowStEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowSt_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowEtEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTimeDowEt_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowMo_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowTu_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowWe_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowTh_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowFr_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowSa_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowSu_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowStEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowSt_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowEtEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTimeDowEt_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowMo_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowTu_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowWe_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowTh_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowFr_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowSa_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowSu_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowStEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowSt_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowEtEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTimeDowEt_1_1
Scheduled Communication Type

Enable to select the scheduled communication type.

Options : DOWNLINK_ONLY, UPLINK_ONLY, BIDIRECTIONAL

Default : DOWNLINK_ONLY

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommTypeEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehSchCommType_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommTypeEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehSchCommType_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommTypeEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehSchCommType_1_1
Communication Duration (s)

Enable to enter the communication duration in seconds.

Range : 1 to 2147483647

Default : 10

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehCommDuEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehCommDu_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehCommDuEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehCommDu_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehCommDuEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehCommDu_1_1
Periodic Time (s)

Enable to enter the periodic Time in seconds.

Range : 1 to 2147483647

Default : 10

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehPerTimeDuEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehPerTimeDu_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehPerTimeDuEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehPerTimeDu_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehPerTimeDuEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehPerTimeDu_1_1
Battery Indication

Enable to select the Battery Indication.

Select Battery Powered. Options : True, False, Default : False

Select Replaceable. Options : True, False, Default : False

Select Rechargeable. Options : True, False, Default : False

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatIndEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatPowEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatPow_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatRepEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatRep_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatRechEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehBatRech_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatIndEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatPowEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatPow_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatRepEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatRep_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatRechEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehBatRech_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatIndEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatPowEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatPow_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatRepEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatRep_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatRechEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehBatRech_1_1
Enable Validity Time

Select to enable the Validity Time.

Select to include the Timestamp. Format per RFC 3339.

The RFC3339 widget has been updated with a Format option, it will be set based on the format in the associated text field when the widget is opened. The timestamp format can be UTC (Z) or Local Time with a UTC Time Offset. When selecting local time, the offset provided is based on the client PC's time zone settings. Reset to Current after changing format or when wanting to refresh Updated Time.

The RFC3339 Timestamp fields previously did not validate the optional time offset at the end of the string. It has been changed to allow either blank, "Z", or a valid UTC time offset value. The default value has been changed to UTC format. Any saved tests having an invalid time offset will be marked red.

Date / Time Format YYYY-MM-DDTHH:MM:SS[time-offset options]

Max of 64 characters.

Select to enter the Relative Time in seconds.

Range: 10 to 999999

Default : 10

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehValTimeEn_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehValTime_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehRelValTime_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehValTimeEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehValTime_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehRelValTime_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehValTimeEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehValTime_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehRelValTime_1_1

Expected UE Movements

 

Geographic Areas

Select Expected UE Movements and up to 4 Number of Location Areas.

Number of Location Areas.

Range : 1 to 4

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvsEn_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvsEn_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvsEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNum_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNum_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNum_1_1

Select Geographic Areas and enter the Number of Geographic Areas:

Number of Geographic Areas.

Range : 1 to 4

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaNum_1_1_1

Geographic Area Type

Use the drop-down list to select the Geographical Area type reporting. The applicable parameters are enabled based on your selection.

Options:

  • Point

  • Point With Uncertainty Circle

  • Point With Uncertainty Ellipse

  • Polygon

  • Point Altitude

  • Point Altitude Uncertainty

  • Ellipsoid Arc

Default: Point

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaGeoAreaType_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaGeoAreaType_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaGeoAreaType_1_1_1_1
Latitude (°)

Available for all Geographic Area Types except Polygon.

Enter Latitude point coordinate in (°) degrees.

Range : -90.0 to 90.0

Default: 39.9910665

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaLatitude_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaLatitude_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaLatitude_1_1_1_1
Longitude (°)

Available for all Geographic Area Types except Polygon.

Enter Longitude point coordinate in (°) degrees.

Range : -180.0 to 180.0

Default: 116.3586652

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaLongitude_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaLongitude_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaLongitude_1_1_1_1
Uncertainty (m)

Available when Geographic Area Type = Point Uncertainty Circle.

Enter the uncertainty for Point Uncertainty Circle in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaUncertainty_1_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaUncertainty_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaUncertainty_1_1_1_1

Uncertainty Semi Major (m)

Uncertainty Semi Minor (m)

Uncertainty Orientation  (m)

Available when Geographic Area Type = Point Uncertainty Ellipse or Point Altitude Uncertainty.

Enter the Uncertainty Semi Major and Semi Minor in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaUncertaintySemiMajor_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaUncertaintySemiMajor_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaUncertaintySemiMajor_1_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaUncertaintySemiMinor_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaUncertaintySemiMinor_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaUncertaintySemiMinor_1_1_1_1

Enter the Uncertainty Orientation.

Range : 0 to 180

Default: 0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaUncertaintyOrientation_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaUncertaintyOrientation_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaUncertaintyOrientation_1_1_1_1
Confidence (%)

Available when Geographic Area Type = Point Uncertainty Ellipse or Point Altitude Uncertainty or Ellipsoid Arc.

Enter the Confidence in percentage value.

Range : 0 to 100

Default: 0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaConfidence_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaConfidence_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaConfidence_1_1_1_1
Altitude (m)

Available when Geographic Area Type = Point Altitude or Point Altitude Uncertainty.

Enter the Altitude in meters.

Range : -32767.0 to 32767.0

Default: 0.0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaAltitude_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaAltitude_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaAltitude_1_1_1_1
Uncertainty Altitude (m)

Available when Geographic Area Type = Point Altitude Uncertainty.

Enter the Uncertainty Altitude in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaUncertaintyAltitude_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaUncertaintyAltitude_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaUncertaintyAltitude_1_1_1_1

Arc Settings

Inner Radius (m)

Uncertain Radius (m)

Offset Angle (°)

Included Angle (°)

Available when Geographic Area Type = Ellipsoid Arc.

Enter the Inner Radius in meters.

Range : 0 to 327675

Default: 0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaInnerRadius_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaInnerRadius_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaInnerRadius_1_1_1_1

Enter the Uncertain Radius in meters.

Range : 0.0 to 1.7976931348623157E308

Default: 0.0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaUncertaintyRadius_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaUncertaintyRadius_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaUncertaintyRadius_1_1_1_1

Enter the Offset Angle and Included Angle in degrees.

Range : 0 to 360

Default: 0

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaOffsetAngle_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaOffsetAngle_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaOffsetAngle_1_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaIncludedAngle_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaIncludedAngle_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaIncludedAngle_1_1_1_1
Polygon

Available when Geographic Area Type = Polygon.

Enter the Number of Points.

Range : 3 to 15

Default: 3

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaPointNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaPointNum_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaPointNum_1_1_1_1

Enter the Latitude (Range : -90.0 to 90.0) and Longitude (Range : -180.0 to 180.0) for each Point.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaPointLatitude1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaPointLatitude1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaPointLatitude1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaGaPointLongitude1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaGaPointLongitude1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaGaPointLongitude1

Expected UE Movements

Civic Addresses

Select to capture the Civic Addresses for Expected UE Movements.

Available when Expected UE Movements is enabled.

Select to enter the Number of Civic Addresses (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaNum_1_1_1

 

Country  

Enter the Country Code. The two-letter ISO 3166 country code in capital ASCII letters, e.g., DE or US. IETF RFC  4776 

Default : US

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaCo_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaCo_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaCo_1_1_1_1
A1

Select to enter National subdivisions (state, canton, region, province, prefecture).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA1En_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA1En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA1_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA1En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA1_1_1_1_1
A2

Select to enter County, parish, gun (JP), district (IN).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA2En_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA2_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA2En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA2_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA2En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA2_1_1_1_1
A3

Select to enter City, township, shi (JP).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA3En_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA3_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA3En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA3_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA3En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA3_1_1_1_1
A4

Select to enter City division, borough, city district, ward, chou (JP).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA4En_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA4_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA4En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA4_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA4En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA4_1_1_1_1
A5

Select to enter neighborhood, block.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA5En_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA5_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA5En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA5_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA5En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA5_1_1_1_1
A6

Select to enter Group of streets below the neighborhood level.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA6En_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaA6_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA6En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaA6_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA6En_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaA6_1_1_1_1
PRD

Select to enter Leading street direction.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPrdEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPrd_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPrdEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPrd_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPrdEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPrd_1_1_1_1
POD

Select to enter Trailing street suffix.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPodEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPod_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPodEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPod_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPodEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPod_1_1_1_1
STS

Select to enter Street suffix or type.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaStsEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaSts_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaStsEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaSts_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaStsEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaSts_1_1_1_1
HNO

Select to enter House number.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaHnoEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaHno_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaHnoEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaHno_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaHnoEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaHno_1_1_1_1
HNS

Select to enter House number suffix.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaHnsEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaHns_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaHnsEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaHns_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaHnsEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaHns_1_1_1_1
LMK

Select to enter Landmark or vanity address.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaLmkEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaLmk_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaLmkEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaLmk_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaLmkEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaLmk_1_1_1_1
LOC

Select to enter Additional location information.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaLocEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaLoc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaLocEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaLoc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaLocEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaLoc_1_1_1_1
NAM

Select to enter Name (residence and office occupant).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaNamEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaNam_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaNamEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaNam_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaNamEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaNam_1_1_1_1
PC

Select to enter Postal/zip code.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPcEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPcEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPcEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPc_1_1_1_1
BLD

Select to enter Building (structure).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaBldEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaBld_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaBldEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaBld_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaBldEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaBld_1_1_1_1
UNIT

Select to enter Unit (apartment, suite).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaUnitEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaUnit_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaUnitEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaUnit_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaUnitEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaUnit_1_1_1_1
FLR

Select to enter Floor.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaFlrEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaFlr_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaFlrEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaFlr_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaFlrEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaFlr_1_1_1_1
ROOM

Select to enter Room.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRoomEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRoom_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRoomEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRoom_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRoomEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRoom_1_1_1_1
PLC

Select to enter Place-type.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPlcEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPlc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPlcEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPlc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPlcEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPlc_1_1_1_1
PLN

Select to enter Postal community name.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPlnEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPln_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPlnEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPln_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPlnEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPln_1_1_1_1
POBOX

Select to enter Post office box (P.O. box).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPoboxEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPobox_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPoboxEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPobox_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPoboxEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPobox_1_1_1_1
ADDCODE

Select to enter Additional code.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaAddcodeEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaAddcode_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaAddcodeEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaAddcode_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaAddcodeEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaAddcode_1_1_1_1
SEAT

Select to enter Seat (desk, cubicle, workstation).

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaSeatEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaSeat_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaSeatEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaSeat_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaSeatEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaSeat_1_1_1_1
RD

Select to enter Primary road or street.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRd_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRd_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRd_1_1_1_1
RDSEC

Select to enter Road clause.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdsecEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdsec_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdsecEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdsec_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdsecEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdsec_1_1_1_1
RDBR

Select to enter Road branch.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdbrEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdbr_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdbrEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdbr_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdbrEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdbr_1_1_1_1
RDSUBBR

Select to enter Road sub-branch.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdsubbrEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaRdsubbr_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdsubbrEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaRdsubbr_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdsubbrEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaRdsubbr_1_1_1_1
PRM

Select to enter Road pre-modifier.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPrmEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPrm_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPrmEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPrm_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPrmEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPrm_1_1_1_1
POM

Select to enter Road post-modifier.

Range : up to 128 characters.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPomEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaCaPom_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPomEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaCaPom_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPomEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaCaPom_1_1_1_1

Expected UE Movements

Network Area

Select to capture the Network Area details for Expected UE Movements.

Available when Expected UE Movements is enabled.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaEn_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaEn_1_1_1

Select to enter Tracking Area List details.

Select to enter the Number of TACs (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncTacListEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncTacListNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncTacListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncTacListNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncTacListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncTacListNum_1_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncTacListMcc_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncTacListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncTacListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncTacListMnc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdSubEvtExpUeBehMvAreaNaIncTacListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncTacListMnc_1_1_1_1
TAC

Enter the Tracking Area Code (TAC). Enter 4 to 6 Hex digits.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncTacListTac_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncTacListTac_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncTacListTac_1_1_1_1

 

Select to enter NCGI List details.

Select to enter the Number of NCGIs - New Radio Cell Global Identifier (NCGI) (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncNcgiListEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncNcgiListNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncNcgiListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncNcgiListNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncNcgiListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncNcgiListNum_1_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncNcgiListMcc_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncNcgiListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncNcgiListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncNcgiListMnc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncNcgiListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncNcgiListMnc_1_1_1_1
NR Cell ID

Enter the New Radio (NR) Cell ID. Enter 9 Hex digits.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncNcgiListNrCellId_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncNcgiListNrCellId_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncNcgiListNrCellId_1_1_1_1

 

Select to enter ECGI List details.

Select to enter the Number of ECGIs - E-UTRA Cell Global Identifier (ECGI) (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncEcgiListEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncEcgiListNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncEcgiListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncEcgiListNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncEcgiListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncEcgiListNum_1_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncEcgiListMcc_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncEcgiListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncEcgiListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncEcgiListMnc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncEcgiListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncEcgiListMnc_1_1_1_1
EUTRAN Cell ID

Enter the EUTRAN Cell ID. Enter 7 Hex digits.

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncEcgiListEutraCellId_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncEcgiListEutraCellId_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncEcgiListEutraCellId_1_1_1_1

 

Select to enter Global RAN Node ID List details.

Select to enter the Number of Global RAN Nodes (up to 4)

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGRanNodeListEn_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGRanNodeListNum_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGRanNodeListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGRanNodeListNum_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGRanNodeListEn_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGRanNodeListNum_1_1_1

MCC

MNC  

Enter the Mobile Country Code (3 digits) and Mobile Network Code (between two and three digits).

Default: 000

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGRanNodeListMcc_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGranNodeListMnc_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGRanNodeListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGranNodeListMnc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGRanNodeListMcc_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGranNodeListMnc_1_1_1_1

N3IWF

NG RAN Node

Enter the N3IWF (Non-3GPP Inter-Working Function Identifier) and the NG RAN Node (Non-3GPP RAN Node Id).

N3IWF and NG RAN Node are mutually exclusive.

Select the NG RAN Node Type : gNB, MacroNGeNB, LMacroNGeNB, SMacroNGeNB

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGranNodeListN3wifEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGranNodeListN3wif_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGranNodeListNgRanNodEn_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGranNodeListNgRanNodType_1_1_1

Tcl Parameter: NamfNnwdafAnaReqEvtFiltExpUeBehMvAreaNaIncGranNodeListNgRanNodId_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGranNodeListN3wifEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGranNodeListN3wif_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGranNodeListNgRanNodEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGranNodeListNgRanNodType_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsSubEvtExpUeBehMvAreaNaIncGranNodeListNgRanNodId_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGranNodeListN3wifEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGranNodeListN3wif_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGranNodeListNgRanNodEn_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGranNodeListNgRanNodType_1_1_1_1

Tcl Parameter: NamfNnwdafEvtsUpdEvtExpUeBehMvAreaNaIncGranNodeListNgRanNodId_1_1_1_1

 

 

^ Back to Top

© 2024 Spirent Communications Inc. All Rights Reserved.