Use the EAP Type drop-down list to select The Extensible Authentication Protocol (EAP) to be used to authenticate MNs in a CSN Nodal or ASN Nodal test for all versions and variants.
For WiMAX Forum Version 1.0.0: Single EAP (user authentication), Double EAP (first device and then user authentication), or None (disable all EAP Settings)
For WiMAX Forum Versions > 1.0.0: Single EAP (user authentication), Combined EAP (first device and then user authentication), or None (disable all EAP Settings)
|
NOTE: When you configure reauthentication with Double EAP, only the device is reauthenticated. |
Default: Single EAP
Authentication with Double EAP requires one parameter:
An MN device is uniquely identified by its MAC address. Enter a starting address that will be incremented for each MN.
Range: Up to 128 hexadecimal characters (omit colons or dash delimiters).
Default: N/A
Example: #(0X010203040506)
The Device shared key that is known to both the MN and the EAP Server.
Range: Up to 32 hexadecimal digits, excluding "0x."
Default: 0x0123456789ABCDEF0123456789ABCDEF
When you select None, all EAP settings are disabled.