SEPP N32-c SBI Node

Use Alternate SBI Client Address

Server / Client

Host

MCC

MNC

NF Instance ID

Select Use Alternate SBI Client Address and enter the Client side Starting IP Address.

Enter Server IPv4 or IPv6 address configuration, # of Nodes from 1 to 1000. Enter Host address. Default: SEPP#(N0).Spirent.com (auto-increment is supported)

Enter MCC (3 digits - Default: 000) and MNC (2 or 3 digits - Default: 00)

If NF Instance ID is selected, enter the NF Instance ID. You may change the default value however you must ensure it does not conflict with any other SBI node.

Format : UUID version 4: 4hexOctet-2hexOctet-2hexOctet-2hexOctet-6hexOctet

Server Ethernet Configuration

Define:

• The IP address and routing options... The IP Address will increment for each node.

Tcl Parameter: SeppN32cSbiClnAddrEn

Tcl Parameter: SeppN32cSbiNodeSrvAddr

Tcl Parameter: SeppN32cSbiNodeClnAddr

Tcl Parameter: SeppN32cSbiNodeSrvHost

Tcl Parameter: SeppN32cMcc

Tcl Parameter: SeppN32cMnc

Tcl Parameter: SeppN32cSbiNodeNfInstanceIdEn

Tcl Parameter: SeppN32cSbiNodeNfInstanceId

• The MAC Address to override the Hardware MAC address so the packets sent out of the interface will use the provisioned MAC address rather the Hardware MAC Address.

• The Outbound Traffic Port to disable the normal routing function and to force packets out of the selected interface.