LR Tab

General

• Subscriber Range
• Client Name
• Location Estimate
• Velocity Estimate
• Pseudonym-Indicator
• 1xRTT-RCID
• Result Code

• Accuracy Fulfilment Indicator
• Format Indicator  (Client Name)
• Age of Location Estimate
• EUTRAN-Positioning Data
• ECGI

Authentication

• Serving Node
• MME Realm
• MSC-Number
• GMLC-Address

• MME Name
• SGSN Number
• 3GPP AAA Server Name
• LCS Capabilities Sets

• Emergency Call Origination
• MO_LR

• Emergency Call Handover
• Emergency Call Release  

Subscriber Range

Subscriber Range is a comma separated string of either single index or the subscriber rane of starting index to ending index separated by hyphen. For example, if the report is applicable for subscriber 1, 2 and from 60 to 100, the string will be "1,2,60-100".

Tcl Parameter: LrSubsRange

Accuracy Fulfilment Indicator

Enable to specify the Accuracy Fulfilment Indicator.

Options: REQUESTED_ACCURACY_FULFILLED (Default), REQUESTED_ACCURACY_NOT_FULFILLED

Tcl Parameter: LrAccFulfilmentEn

Tcl Parameter: LrAcuracyFulfilIndicator

Client Name

Specify the Client Name

Range: 0 to 64 Characters

Default : LCSName1

Tcl Parameter: LrClientNameEn

Tcl Parameter: LrClientName

Specify the Client Name Format

Range: LOGICAL_NAME, EMAIL_ADDRESS, MSISDN, URL, SIP_URL

Default : LOGICAL_NAME

Tcl Parameter: LrFrmtIndicator

Enable to include Location Estimate

Range: 0 to 65535.

Tcl Parameter: LrLocEstimateEn

Tcl Parameter: LrLocEstimate

Age of Location Estimate

Age of Location Estimate in Minutes.

Range: 0 to 4294967295

Default : 0

Tcl Parameter: LrAgeOfLocEstimateEn

Tcl Parameter: LrAgeOfLocEstimate

Enable to include Velocity Estimate

Range: 0 to 65535.

Enable to include EUTRAN-Positioning Data.

Range: 0 to 65535.

Enable to include Pseudonym Indicator.

Range: PSEUDONYM_NOT_REQUESTED, (Default), PSEUDONYM_REQUESTED,

Tcl Parameter: LrPsudonymIndicatorEn

Tcl Parameter: LrPsudonymIndicator

Enable to include 1xRTT-RCID.

Range: 0000 0010 (Default). 0000 0111

Tcl Parameter: LrRttRcidEn

Tcl Parameter: LrRttRcid

Enable to include ECGI. Hex format without the 0x prefix.

The ECGI has the following format:

[PLMN][Cell ID]0

The first 6 digits represent the PLMN, the next 7 digits represent the Cell ID, the last digit should always be 0 (zero).

Fewer than 14 digits is allowed but the number of digits entered must be an even number. If fewer than 14 digits are entered, the Test Server will pad with zeros to make 14 digits at runtime.

Range: 0 to 9, abcdef

Tcl Parameter: LrECGIEn

Tcl Parameter: LrECGI

Each of the following can be pre-configured for each report.

OPTIONS: DIAMETER_SUCCESS, DIAMETER_ERROR_USER_UNKNOWN, DIAMETER_ERROR_UNAUTHORIZED_REQUESTING_NETWORK, DIAMETER_ERROR_SUSPENDED_USER, DIAMETER_ERROR_UNREACHABLE, DIAMETER_ERROR_DETACHED_USER, DIAMETER_ERROR_POSITIONING_DENIED,  DIAMETER_ERROR_POSITIONING_FAILED

Default: DIAMETER_SUCCESS

Tcl Parameter: LrResultCode

Enable to include the following sub fields: MME Node, MME Realm, SGSN Number, MSC-Number, 3GPP AAA Server Name, GMLC-Address and LCS Capabilities sets.

Tcl Parameter: LrServingNodeEn

MME Name

Enable to include MME Name.

Tcl Parameter: LrMmeNameEn

Enable to include MME Realm.

Tcl Parameter: LrMmeRealmEn