H248 IF Tab

The H248 IF tab is used to define the H.248 / Megaco stack (RadVision). Available in IP Application Node and IMS Node test cases.

Available when Iq Interface or H248 is enabled on the IP Application Test Configuration.

Related Measurements

Measurements collected for H248 related processing are reported on the H248 Measurements report tab.

Port	Enter the Port. Range: 0 to 65535 Default: 2944 Tcl Parameter: McRetries
Registration Timeout (s)	Enter the Registration Timeout in seconds used for Service Change. Range : 0 to 65535 Default: 300 Tcl Parameter: H248RegTimeout
Long Timer for Requests (s)	Enter the Long Timer value used for Requests (Add/Modify). Range : 0 to 65535 Default: 30 Tcl Parameter: H248ReqTimer
Service Change Reason	Select Service Change Reason when registering the MGW to MGC. Available on IP application Node. Options: 900 Service Restored, 901 Cold Boot (Default), 902 Warm Boot, 903 MGC Directed Change Tcl Parameter: H248SvcChgReason
Starting RTP Port	Enter the starting RTP Port. Available on IP application Node. Range : 0 to 65535 Default: 3000 Tcl Parameter: H248StRtpPort